Proud to be a UK-based company
Contact us
Important compatibility info
| Weight | 0.011 kg |
| Length | 85 mm |
| Width | 19 mm |
| Thickness | 21 mm |
| Function | Valve, fuel filter |
| Type | Valve, fuel filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.34
Important compatibility info
| Weight | 0.510 kg |
| Placement on Vehicle | Right Rear, Left Rear |
| Length | 1680 mm |
| Function | Cable Pull, parking brake |
| Replaces | 16917 |
| Type | Cable Pull, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.34
Important compatibility info
| Weight | 0.260 kg |
| Placement on Vehicle | Rear Axle |
| Function | Camber Correction Screw |
| Steering arm type | Control Arm |
| Type | Camber Correction Screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Screw (37212)
- 1x Febi Washer (37213)
- 1x Febi Screw (37214)
- 2x Febi Nut (37215)
£11.34
Important compatibility info
| Piston Diameter | 25.4 mm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Material | Cast Iron |
| Function | Wheel Brake Cylinder |
| Weight | 0.45 kg |
| Type | Wheel Brake Cylinder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.33
Important compatibility info
| Height | 72 mm |
| Additional Information | with gaskets/seals |
| Outer diameter | 78 mm |
| Inner diameter | 7 mm |
| Filter type | Filter Insert |
| Weight | 0.082 kg |
| Type | Fuel Filter |
| Function | Fuel Filter |
| Gasket outer diameter | 97 mm |
| Gasket inner diameter | 90 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.33
Important compatibility info
| Function | Inner Tie Rod |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| External Thread Size | M16 x 1,5 |
| Length | 235 mm |
| Weight | 0.526 kg |
| Internal Thread Size | M16 x 1,5 |
| Type | Inner Tie Rod |
| Additional Information | with counter nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.33
Important compatibility info
| Width | 117 mm |
| Filter type | Filter Insert |
| Weight | 0.32 kg |
| Type | Air Filter |
| Function | Air Filter |
| Height | 64 mm |
| Length | 360 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.33
Important compatibility info
| Length | 65 mm |
| Width | 54 mm |
| Material | PU (Polyurethane) |
| Weight | 0.034 kg |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Type | Rubber Buffer, suspension |
| Function | Rubber Buffer, suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.33
Important compatibility info
| Weight | 0.179 kg |
| Length | 100 mm |
| Material | Thermoplast |
| Inner diameter 1 | 29 mm |
| Inner diameter 2 | 67 mm |
| Function | Bellow Kit, drive shaft |
| Type | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (38348)
- 1x Febi Clamping Clip (38758)
- 1x Febi Clamping Clip (45640)
- 1x Febi High Temperature Lubricant (03630)
£11.33
Important compatibility info
| Weight | 0.26 kg |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Length | 72 mm |
| Spanner Size | 17 |
| Rod/Strut | Coupling Rod |
| Colour | Black |
| Surface | Painted |
| Function | Link/Coupling Rod, stabiliser bar |
| External Thread Size | M10 x 1,25 |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.32
Important compatibility info
| Type | Brake Hose |
| Function | Brake Hose |
| Weight | 0.120 kg |
| Length | 502 mm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right, outer |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.32
Important compatibility info
| Weight | 0.144 kg |
| Function | Bearing |
| Thickness | 15 mm |
| Outer diameter | 52 mm |
| Inner diameter | 20 mm |
| Type | Bearing |
| Bearing Type | Rolling Bearing |
| Bearing Code | 6304 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.32
Important compatibility info
| Additional Information 2 | with clamps |
| Inner diameter 1 | 13 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 173 mm |
| Type | Bellow Kit, steering |
| Weight | 0.054 kg |
| Inner diameter 2 | 51 mm |
| Material | Thermoplastic polyester elastomer |
| Function | Bellow Kit, steering |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.32
Important compatibility info
| Function | Sensor, exterior temperature |
| Weight | 0.002 kg |
| Number of Connectors / Ports | 2 |
| Type | Sensor, exterior temperature |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.32
Important compatibility info
| Length | 74 mm |
| Placement on Vehicle | Outer, Front Axle Left, Front Axle Right |
| Type | Tie Rod End |
| Function | Tie Rod End |
| Weight | 0.316 kg |
| Spanner Size | 22 |
| External Thread Size | M12 x 1,5 |
| Internal Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.32
Important compatibility info
| Weight | 0.33 kg |
| Outer diameter 1 | 59 mm |
| Width 1 | 16 mm |
| Outer diameter 2 | 45 mm |
| Width 2 | 15.5 mm |
| Bearing Type | Tapered Roller Bearing |
| Function | Wheel Bearing Kit |
| Inner diameter 1 | 32 mm |
| Inner diameter 2 | 19 mm |
| Type | Wheel Bearing Kit |
| Additional Information 2 | with shaft seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.32
Important compatibility info
| Number of Teeth, ABS ring | 100 |
| Function | Sensor Ring, ABS |
| Material | Steel |
| Outer diameter | 148 mm |
| Thickness | 13.3 mm |
| Weight | 0.14 kg |
| Inner diameter | 118 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Type | Sensor Ring, ABS |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.32
Important compatibility info
| Number of Connectors / Ports | 2 |
| Weight | 0.013 kg |
| Type | Plug |
| Function | Plug |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.32
Important compatibility info
| Weight | 0.043 kg |
| Material | Aluminium |
| Function | Injector Holder |
| Distance of fastening bolts | 12 mm |
| Type | Injector Holder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.32
Important compatibility info
| Weight | 0.21 kg |
| Placement on Vehicle | Front Axle, transmission sided |
| Function | Bellow Kit, drive shaft |
| Inner diameter 2 | 68 mm |
| Material | Rubber |
| Length | 88 mm |
| Type | Bellow Kit, drive shaft |
| Inner diameter 1 | 29 mm |
| Joint Type | Tripod Joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (01113)
- 1x Febi Clamping Clip (38764)
- 1x Febi Clamping Clip (38759)
- 1x Febi Molybdenum Grease (02582)
£11.32
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023