Important compatibility info
Weight | 0.698 kg |
Function | Inner Tie Rod |
External Thread Size | M16 x 1,5 |
Spanner Size | 38 |
Type | Inner Tie Rod |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Outer diameter | 42 mm |
Additional Information | with counter nut |
Length | 228 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 174 mm |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Inner diameter 1 | 2 mm |
Type | Bellow Kit, steering |
Function | Bellow Kit, steering |
Material | Thermoplastic polyester elastomer |
Additional Information 2 | with clamps |
Inner diameter 2 | 61 mm |
Weight | 0.062 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Width | 48 mm |
Function | Mounting, stabiliser bar |
Type | Mounting, stabiliser bar |
Weight | 0.065 kg |
Inner diameter | 22 mm |
Material | Rubber |
Thickness | 46 mm |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Length | 40 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle |
Length | 50 mm |
Weight | 0.090 kg |
Width | 40 mm |
Material | Rubber with fabric lining |
Thickness | 50 mm |
Outer diameter | 40 mm |
Inner diameter | 13 mm |
Function | Mounting, stabiliser bar |
Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Filter type | Spin-on Filter |
Function | Fuel filter |
Weight | 0.555 kg |
Internal Thread Size | M24 x 1,5 |
Type | Fuel filter |
Height | 143 mm |
Outer diameter | 93 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Inner diameter | 50 mm |
Function | Mounting, stabiliser bar |
Weight | 0.6 kg |
Outer diameter | 105 mm |
Material | Rubber |
Length | 96.5 mm |
Placement on Vehicle | Rear Axle |
Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Joint Type | Tripod Joint |
Weight | 0.184 kg |
Placement on Vehicle | transmission sided, Front Axle |
Length | 92 mm |
Material | Rubber |
Paired article numbers | 48824 |
Inner diameter 1 | 8 mm |
Inner diameter 2 | 74 mm |
Type | Bellow Kit, drive shaft |
Function | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow Kit, drive shaft (171746)
- 1x Febi Molybdenum Grease (02582)
Important compatibility info
Placement on Vehicle | Right Rear |
Length | 1448 mm |
Paired article numbers | 49621 |
Function | Cable Pull, parking brake |
Weight | 0.54 kg |
Type | Cable Pull, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.44 kg |
Placement on Vehicle | Left Rear |
Length | 1322 mm |
Paired article numbers | 49620 |
Function | Cable Pull, parking brake |
Type | Cable Pull, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Inner diameter | 26 mm |
Outer diameter | 83 mm |
Material | Rubber/Metal |
Weight | 0.41 kg |
Placement on Vehicle | Front Axle |
Function | Repair Kit, suspension strut support mount |
Extra Description | ProKit |
Type | Repair Kit, suspension strut support mount |
Additional Information 2 | with fastening material, with ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension Strut Support Mount (09227)
- 1x Febi Nut (37722)
- 1x Febi Nut (14392)
- 1x Febi Rolling Bearing, suspension strut support mount (01111)
- 1x Febi Screw (27388)
Important compatibility info
Weight | 0.062 kg |
Number of Connectors / Ports | 3 |
Function | Sensor, camshaft position |
Type | Sensor, camshaft position |
for OE number | 058 905 161 B |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Air Filter |
Width | 229 mm |
Length | 295 mm |
Height | 57 mm |
Weight | 0.43 kg |
Filter type | Filter Insert |
Type | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.342 kg |
Placement on Vehicle | Front Axle, transmission sided |
Function | Bellow Kit, drive shaft |
Inner diameter 2 | 64 mm |
Inner diameter 1 | 25 mm |
Material | Rubber |
Length | 98 mm |
Type | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Fastening Clamp (08406)
- 1x Febi Fastening Clamp (08408)
- 1x Febi Circlip (09454)
- 1x Febi Molybdenum Grease (02582)
Important compatibility info
Placement on Vehicle | Rear Axle Left, inner, Rear Axle Right |
Material | Rubber/Metal |
Outer diameter | 44.9 mm |
Thickness | 50 mm |
Inner diameter | 12 mm |
Type | Mounting, control/trailing arm |
Function | Mounting, control/trailing arm |
Weight | 0.100 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.435 kg |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Material | Rubber/Metal |
Outer diameter | 52 mm |
Thickness | 70 mm |
Inner diameter | 16.1 mm |
Type | Bushing, axle beam |
Function | Bushing, axle beam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 21 mm |
Additional Information 2 | with seal ring |
Number of Connectors / Ports | 3 |
Weight | 0.02 kg |
Type | Sensor, camshaft position |
Function | Sensor, camshaft position |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.66 kg |
Placement on Vehicle | Rear Axle |
Length | 61.5 mm |
Width | 61 mm |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 15.6 mm |
Function | Brake Pad Set, disc brake |
Type | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.25 kg |
Length | 75 mm |
Material | Steel |
Spanner Size | 17 |
Paired article numbers | 34758 |
Rod/Strut | Coupling Rod |
Colour | Black |
Placement on Vehicle | Front Axle Left |
Surface | Painted |
External Thread Size | M10 x 1,25 |
Function | Link/Coupling Rod, stabiliser bar |
Extra Description | ProKit |
Type | Link/Coupling Rod, stabiliser bar |
Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.289 kg |
Filter type | Filter Insert |
Height | 49 mm |
Width | 179 mm |
Function | Air Filter |
Type | Air Filter |
Length | 233 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Link/Coupling Rod, stabiliser bar |
Length | 140 mm |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Material | Steel |
Rod/Strut | Coupling Rod |
External Thread Size | M10 x 1,25 |
Weight | 0.21 kg |
Extra Description | ProKit |
Type | Link/Coupling Rod, stabiliser bar |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023