Proud to be a UK-based company
Contact us
Important compatibility info
| Weight | 0.03 kg |
| Height | 147 mm |
| Outer diameter | 58 mm |
| Inner diameter | 27 mm |
| Filter type | Filter Insert |
| Seal Diameter | 62.5 mm |
| Type | Oil Filter |
| Function | Oil Filter |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.30
Important compatibility info
| Weight | 0.360 kg |
| Placement on Vehicle | Front Axle Left, Lower, Front Axle Right |
| Cone Size | 17 mm |
| Function | Ball Joint |
| Type | Ball Joint |
| Steering arm type | for control arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.30
Important compatibility info
| Weight | 0.040 kg |
| Length | 251 mm |
| Height | 20 mm |
| Width | 182 mm |
| Filter type | Pollen Filter |
| Type | Filter, cabin air |
| Function | Filter, cabin air |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.30
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Material | Cast Iron |
| Weight | 0.37 kg |
| Type | Wheel Brake Cylinder |
| Function | Wheel Brake Cylinder |
| Piston Diameter | 22.2 mm |
| for OE number | 1 115 986 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.30
Important compatibility info
| Weight | 0.236 kg |
| Function | Gasket Set, wheel hub |
| Placement on Vehicle | Rear Axle |
| Type | Gasket Set, wheel hub |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Shaft Seal, wheel hub (15551)
- 1x Febi Seal Ring, wheel hub (06763)
- 1x Febi Circlip (06761)
£11.30
Important compatibility info
| External Thread Size | M12 x 1,5 |
| Additional Information | with lock nut |
| Weight | 0.30 kg |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Length | 240 mm |
| Inner diameter | 12.3 mm |
| Rod/Strut | Coupling Rod |
| Quality/ Grade | 10 |
| DIN / ISO | 985-10511 |
| Function | Link/Coupling Rod, stabiliser bar |
| Type | Link/Coupling Rod, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.30
Important compatibility info
| Weight | 0.073 kg |
| Inner diameter 1 | 13 mm |
| Inner diameter 2 | 60 mm |
| Material | Thermoplastic polyester elastomer |
| Type | Bellow Kit, steering |
| Function | Bellow Kit, steering |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Additional Information 2 | with clamps |
| Length | 196 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.30
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Function | Tie Rod End |
| Weight | 0.250 kg |
| Internal Thread Size | M14 x 2 |
| Type | Tie Rod End |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.30
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Length | 450 mm |
| Weight | 0.105 kg |
| Type | Brake Hose |
| Function | Brake Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.29
Important compatibility info
| Weight | 0.089 kg |
| Length | 1050 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of Ribs | 5 |
| Function | V-Ribbed Belt |
| Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.29
Important compatibility info
| Weight | 0.05 kg |
| Height | 134 mm |
| Outer diameter | 53 mm |
| Filter type | Filter Insert |
| Type | Oil Filter |
| Function | Oil Filter |
| Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.29
Important compatibility info
| Inner diameter 2 | 69 mm |
| Inner diameter 1 | 19 mm |
| Material | Rubber |
| Length | 94 mm |
| Placement on Vehicle | Front Axle, Wheel Side |
| Function | Bellow Kit, drive shaft |
| Weight | 0.43 kg |
| Type | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (03376)
- 1x Febi Clamping Clip (45642)
- 1x Febi Clamping Clip (38757)
- 1x Febi Nut, kingpin (02160)
- 1x Febi Molybdenum Grease (02582)
£11.29
Important compatibility info
| Type | Accessory Kit, disc brake pad |
| Placement on Vehicle | Front Axle |
| Weight | 0.166 kg |
| Function | Accessory Kit, disc brake pad |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.29
Important compatibility info
| Brake System | ATE |
| Function | Accessory Kit, disc brake pad |
| Type | Accessory Kit, disc brake pad |
| Weight | 0.068 kg |
| Placement on Vehicle | Rear Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.29
Important compatibility info
| Weight | 0.007 kg |
| Length | 65 mm |
| Additional Information | with gasket/seal |
| Material | Steel |
| Outer diameter | 14 mm |
| Surface | Zinc-coated |
| Function | Blind Rivet |
| Screw length below head | 54 mm |
| Type | Blind Rivet |
| Bore Diameter | 4.8 mm |
| Thread Length | 24 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.28
Important compatibility info
| External Thread Size | M10 x 1,5 |
| Weight | 0.446 kg |
| Placement on Vehicle | Right Front |
| Material | Rubber/Metal |
| Outer diameter | 74 mm |
| Thickness | 46 mm |
| Paired article numbers | 15785 |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.28
Important compatibility info
| Thread Length | 33 mm |
| Function | Link/Coupling Rod, stabiliser bar |
| Outer diameter | 9 mm |
| Thickness | 57 mm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Additional Information | with nuts |
| Paired article numbers | 102813 |
| Rod/Strut | Coupling Rod |
| Length | 88 mm |
| Material | Steel |
| Weight | 0.342 kg |
| External Thread Size | M12 x 1,25 |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
| Replaces | 102813 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.28
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Length | 115 mm |
| Material | Rubber/Metal |
| Outer diameter | 62 mm |
| Thickness | 48 mm |
| Inner diameter | 8 mm |
| Function | Suspension Strut Support Mount |
| Weight | 0.2 kg |
| Type | Suspension Strut Support Mount |
| Additional Information 2 | without ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.28
Important compatibility info
| Material | ACM (Polyacrylate) |
| Function | Gasket, cylinder head cover |
| Weight | 0.076 kg |
| Type | Gasket, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.28
Important compatibility info
| Function | Oil Filter |
| Inner diameter | 29 mm |
| Filter type | Filter Insert |
| Seal Diameter | 81 mm |
| Type | Oil Filter |
| Additional Information 2 | with seal ring |
| Weight | 0.123 kg |
| Height | 200 mm |
| Outer diameter | 72 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.28
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023