Proud to be a UK-based company
Contact us
Important compatibility info
| Weight | 0.13 kg |
| Internal Thread Size | M10 x 1 |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 379 mm |
| Outer diameter | 10 mm |
| Inner diameter | 3 mm |
| Function | Brake Hose |
| Type | Brake Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.00
Important compatibility info
| Length | 300 mm |
| Weight | 0.08 kg |
| External Thread Size | M10 x 1 |
| Function | Brake Hose |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right, outer |
| Type | Brake Hose |
| Internal Thread Size | M10 x 1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.00
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Length | 435 mm |
| Weight | 0.145 kg |
| Type | Brake Hose |
| Function | Brake Hose |
| External Thread Size | M10 x 1 |
| Internal Thread Size | M10 x 1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.00
Important compatibility info
| Placement on Vehicle | Rear Axle Left |
| Length | 292 mm |
| Weight | 0.08 kg |
| Internal Thread Size | M10 x 1 |
| Function | Brake Hose |
| External Thread Size | M10 x 1 |
| Type | Brake Hose |
| Paired article numbers | 45211 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.00
Important compatibility info
| Weight | 0.312 kg |
| Placement on Vehicle | Front Axle Left |
| Length | 75 mm |
| Paired article numbers | 08096 |
| Function | Tie Rod End |
| Internal Thread Size | M14 x 2 |
| External Thread Size | M10 x 1,25 |
| Type | Tie Rod End |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.00
Important compatibility info
| Weight | 0.3 kg |
| Cooling Hose | from engine to thermostat |
| Function | Radiator Hose |
| Type | Radiator Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£10.99
Important compatibility info
| Weight | 0.770 kg |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Length | 348 mm |
| Inner diameter | 12 mm |
| Spanner Size | 30 |
| Rod/Strut | Coupling Rod |
| Function | Link/Coupling Rod, stabiliser bar |
| External Thread Size | M12 x 1,75 |
| Type | Link/Coupling Rod, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£10.99
Important compatibility info
| Weight | 0.29 kg |
| Function | Protection Lid, wheel hub |
| Type | Protection Lid, wheel hub |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£10.99
Important compatibility info
| Weight | 0.304 kg |
| Placement on Vehicle | Rear Axle Left, Lower, inner, Rear Axle Right, Rear |
| Material | Rubber/Metal |
| Outer diameter | 49 mm |
| Thickness | 70 mm |
| Inner diameter | 14.3 mm |
| Type | Mounting, control/trailing arm |
| Function | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£10.99
Important compatibility info
| Function | Filter, cabin air |
| Filter type | Activated Carbon Filter |
| Width | 200 mm |
| Height | 30 mm |
| Length | 214 mm |
| Type | Filter, cabin air |
| Weight | 0.180 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£10.99
Important compatibility info
| Placement on Vehicle | Front Axle, Wheel Side |
| Length | 100 mm |
| Material | Rubber |
| Inner diameter 1 | 20 mm |
| Inner diameter 2 | 68 mm |
| Function | Bellow Kit, drive shaft |
| Weight | 0.194 kg |
| Type | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (03292)
- 1x Febi Clamping Clip (45641)
- 1x Febi Clamping Clip (38757)
- 1x Febi Circlip (03215)
- 1x Febi Molybdenum Grease (02582)
£10.99
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Material | Cast Iron |
| Function | Wheel Brake Cylinder |
| Weight | 0.35 kg |
| Piston Diameter | 17.5 mm |
| Type | Wheel Brake Cylinder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£10.99
Important compatibility info
| Function | Bellow Kit, drive shaft |
| Type | Bellow Kit, drive shaft |
| Joint Type | CV Joint |
| Weight | 0.173 kg |
| Inner diameter 2 | 55 mm |
| Inner diameter 1 | 20 mm |
| Material | NBR (nitrile butadiene rubber) |
| Length | 96 mm |
| Placement on Vehicle | transmission sided, Front Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow Kit, drive shaft (175241)
- 1x Febi Molybdenum Grease (02582)
£10.99
Important compatibility info
| Type | Hydraulic Filter, automatic transmission |
| Filter type | Spin-on Filter |
| Outer diameter | 93 mm |
| Function | Hydraulic Filter, automatic transmission |
| Weight | 0.670 kg |
| Thickness | 144 mm |
| Internal Thread Size | 1" - 12 UNF |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£10.99
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Material | Plastic |
| Rod/Strut | Coupling Rod |
| Function | Link/Coupling Rod, stabiliser bar |
| Length | 160 mm |
| Weight | 0.230 kg |
| Extra Description | ProKit |
| External Thread Size | M10 x 1,5 |
| Type | Link/Coupling Rod, stabiliser bar |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£10.99
Important compatibility info
| Weight | 0.022 kg |
| Function | Seal Set, valve stem |
| Type | Seal Set, valve stem |
| for OE number | 117 050 03 67 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£10.98
Important compatibility info
| Length | 124.7 mm |
| Weight | 0.062 kg |
| Type | Intake Valve |
| Valve stem diameter | 7.005 mm |
| Function | Intake Valve |
| Valve head diameter | 33 mm |
| Notches / Holes Number | 1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£10.98
Important compatibility info
| Pipe Diameter | 9 mm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Length | 199 mm |
| Material | Steel |
| Rod/Strut | Coupling Rod |
| Weight | 0.25 kg |
| Function | Link/Coupling Rod, stabiliser bar |
| External Thread Size | M10 x 1,25 |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£10.98
Important compatibility info
| Weight | 0.30 kg |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Length | 100 mm |
| Material | Steel |
| Rod/Strut | Coupling Rod |
| Function | Link/Coupling Rod, stabiliser bar |
| Extra Description | ProKit |
| External Thread Size | M10 x 1,25 |
| Type | Link/Coupling Rod, stabiliser bar |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£10.98
Important compatibility info
| Weight | 0.08 kg |
| Valve seat angle | 30 ° |
| Valve head diameter | 36.8 mm |
| Notches / Holes Number | 3 |
| Function | Intake Valve |
| Type | Intake Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£10.98
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023