Important compatibility info
Length | 30 mm |
Weight | 0.082 kg |
Width | 11 mm |
Material | PU (Polyurethane) |
Function | Rubber Buffer, suspension |
Placement on Vehicle | Rear Axle |
Type | Rubber Buffer, suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.08 kg |
Valve seat angle | 30 ° |
Valve head diameter | 36.8 mm |
Notches / Holes Number | 3 |
Function | Intake Valve |
Type | Intake Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with fastening/mounting material |
Placement on Vehicle | Lower, Front Axle Left, Front Axle Right |
Cone Size | 17 mm |
Function | Ball Joint |
Weight | 0.366 kg |
Extra Description | ProKit |
Type | Ball Joint |
Steering arm type | for control arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Ball Joint (07855)
- 1x Febi Securing Plate, ball joint (07862)
- 3x Febi Clamping Bolt, ball joint (07866)
Important compatibility info
Weight | 0.30 kg |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Length | 100 mm |
Material | Steel |
Rod/Strut | Coupling Rod |
Function | Link/Coupling Rod, stabiliser bar |
Extra Description | ProKit |
External Thread Size | M10 x 1,25 |
Type | Link/Coupling Rod, stabiliser bar |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.040 kg |
Material | ACM (Polyacrylate) |
Thickness | 11.9 mm |
Inner diameter | 38.5 mm. 40 mm |
Outer diameter | 76 mm |
Function | Shaft Seal, differential |
Placement on Vehicle | Rear Axle, both sides |
Type | Shaft Seal, differential |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 124.7 mm |
Weight | 0.062 kg |
Type | Intake Valve |
Valve stem diameter | 7.005 mm |
Function | Intake Valve |
Valve head diameter | 33 mm |
Notches / Holes Number | 1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | with clamps |
Inner diameter 1 | 13 mm |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 173 mm |
Type | Bellow Kit, steering |
Weight | 0.054 kg |
Inner diameter 2 | 51 mm |
Material | Thermoplastic polyester elastomer |
Function | Bellow Kit, steering |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Height | 55 mm |
Function | Air Filter |
Type | Air Filter |
Filter type | Filter Insert |
Length | 390 mm |
Width | 184 mm |
Weight | 0.025 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, inner, Front Axle Right |
Length | 106 mm |
Paired article numbers | 04942 |
Thread Type | with left-hand thread |
Function | Tie Rod End |
Weight | 0.314 kg |
External Thread Size | M16 x 1,5, M10 x 1 |
Extra Description | ProKit |
Type | Tie Rod End |
Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 85 mm |
Filter type | Spin-on Filter |
Height | 142 mm |
Weight | 0.400 kg |
Type | Fuel filter |
Function | Fuel filter |
Internal Thread Size | M16 x 1,5, M8 x 1,25 |
Seal Diameter | 69 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 273 mm |
Height | 59 mm |
Width | 232 mm |
Filter type | Filter Insert |
Type | Air Filter |
Function | Air Filter |
Weight | 0.313 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.34 kg |
Placement on Vehicle | Front Axle Left |
Length | 212 mm |
Material | Steel |
Spanner Size | 19 |
Paired article numbers | 41641 |
Rod/Strut | Coupling Rod |
Colour | Black |
Function | Link/Coupling Rod, stabiliser bar |
External Thread Size | M12 x 1,25 |
Extra Description | ProKit |
Type | Link/Coupling Rod, stabiliser bar |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.2 kg |
Function | Bellow Kit, drive shaft |
Inner diameter 2 | 80 mm |
Inner diameter 1 | 34 mm |
Material | Rubber |
Length | 101 mm |
Placement on Vehicle | Front Axle, transmission sided |
Type | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (22014)
- 1x Febi Clamping Clip (45643)
- 1x Febi Clamping Clip (38759)
- 1x Febi Molybdenum Grease (02582)
Important compatibility info
Weight | 0.170 kg |
Placement on Vehicle | Upper Left |
Function | Radiator Hose |
Cooling Hose | from thermostat to radiator |
Type | Radiator Hose |
Hose Length | 200 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.34 kg |
External Thread Size | M12 x 1,25 |
Additional Information | with nuts |
Function | Link/Coupling Rod, stabiliser bar |
Colour | Black |
Paired article numbers | 41640 |
Rod/Strut | Coupling Rod |
Spanner Size | 19 |
Length | 212 mm |
Material | Steel |
Placement on Vehicle | Front Axle Right |
Extra Description | ProKit |
Type | Link/Coupling Rod, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.35 kg |
Function | Cable Pull, parking brake |
Type | Cable Pull, parking brake |
Length | 1106 mm |
Placement on Vehicle | Left Rear |
Paired article numbers | 101811 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.2 kg |
Placement on Vehicle | Left Rear, Right Rear |
Length | 1780 mm |
Brake Type | Drum Brake |
Type | Cable Pull, parking brake |
Function | Cable Pull, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Inner diameter 2 | 65 mm |
Inner diameter 1 | 34 mm |
Function | Bellow Kit, drive shaft |
Material | Thermoplast |
Weight | 0.142 kg |
Type | Bellow Kit, drive shaft |
Length | 76 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (49888)
- 1x Febi Clamping Clip (45640)
- 1x Febi Clamping Clip (100579)
- 1x Febi Molybdenum Grease (02582)
Important compatibility info
Placement on Vehicle | Front Axle Right, transmission sided |
Length | 110 mm |
Material | Rubber |
Inner diameter 1 | 20 mm |
Inner diameter 2 | 79 mm |
Function | Bellow Kit, drive shaft |
Weight | 0.3 kg |
Type | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (10386)
- 1x Febi Clamping Clip (38765)
- 1x Febi Clamping Clip (38757)
- 2x Febi Molybdenum Grease (02582)
Important compatibility info
Length | 305 mm |
Filter type | Filter Insert |
Weight | 0.235 kg |
Width | 149 mm |
Height | 58 mm |
Type | Air Filter |
Function | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023