Proud to be a UK-based company
Contact us
Important compatibility info
| Length | 694 mm. 681 mm |
| Placement on Vehicle | Rear Axle |
| Width | 57 mm |
| Type | Spring Pack |
| Function | Spring Pack |
| Spring Design | Leaf spring |
| Weight | 12.0 kg |
| Number of spring leaves | 1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£117.76
Important compatibility info
| Shock Absorber Design | Telescopic Shock Absorber |
| Shock Absorber Type | Oil Pressure |
| Placement on Vehicle | Rear Axle |
| Weight | 6.9 kg |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 903 mm |
| Min. Length | 558 mm |
| Pipe Diameter | 80 mm. 70 mm |
| Mounting points diameter | 20 mm |
| Piston conrod diameter | 16 mm |
| Type | Shock Absorber |
| Function | Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£117.73
Important compatibility info
| External Thread Size | M16 x 1,5, M24 x 1,5, M10 x 1,5, M14 x 2 |
| Weight | 5.7 kg |
| Placement on Vehicle | Rear Axle, non-steered trailing axle |
| Outer diameter | 229 mm. 168 mm |
| Thickness | 630 mm. 185 mm |
| Type | Bellow, air suspension |
| Function | Bellow, air suspension |
| Additional Information | with piston, with piston rod |
| Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£117.71
Important compatibility info
| Length | 425 mm |
| Width | 55 mm |
| Function | Camshaft |
| Type | Camshaft |
| Weight | 4.44 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£117.65
Important compatibility info
| Number of Wings | 6 |
| Additional Information | with gasket/seal |
| Weight | 1.7 kg |
| Type | Water Pump, engine cooling |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Metal |
| Seal Material | Rubber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£117.56
Important compatibility info
| Function | Centre Rod Assembly |
| Weight | 12.9 kg |
| External Thread Size | M24 x 1,5 |
| Internal Thread Size | M30 x 1,5 |
| Rod/Strut | Push Rod |
| Cone Size | 30 mm |
| Adjustable | Adjustable on both sides |
| Pipe Diameter | 46 mm |
| Extra Description | ProKit |
| Additional Information | with nuts |
| Type | Centre Rod Assembly |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£117.55
Important compatibility info
| Weight | 4.4 kg |
| Voltage | 12 V |
| Type | Starter |
| Number of Teeth | 10 |
| Rated Power | 2.0 kW |
| Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£117.55
Important compatibility info
| Weight | 1.7 kg |
| Type | Cooler, exhaust gas recirculation |
| Function | Cooler, exhaust gas recirculation |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£117.55
Important compatibility info
| Material | Metal |
| Thickness | 10 mm |
| Weight | 0.321 kg |
| Type | Gasket, cylinder head |
| Function | Gasket, cylinder head |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£117.55
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 1666 mm |
| Cone Size | 22 mm |
| Pipe Diameter | 42 mm |
| Weight | 11.7 kg |
| External Thread Size | M18 x 1,5 |
| Internal Thread Size | M30 x 1,5 LHT, M30 x 1,5 RHT |
| Function | Tie Rod |
| Extra Description | ProKit |
| Type | Tie Rod |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£117.55
Important compatibility info
| Weight | 0.130 kg |
| External Thread Size | M14 x 1,5 |
| Spanner Size | 32 |
| Number of Connectors / Ports | 4 |
| Cable Length | 180 mm |
| Type | Sensor, oil pressure |
| Function | Sensor, oil pressure |
| for OE number | 1 881 260 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£117.55
Important compatibility info
| Inner length 2 | 770 mm |
| Inner length 1 | 810 mm |
| Weight | 0.934 kg |
| Type | Cable Pull, manual transmission |
| Function | Cable Pull, manual transmission |
| Outer length 1 | 1039 mm |
| Outer length 2 | 1090 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£117.55
Important compatibility info
| Voltage | 12 V |
| Number of Ribs | 6 |
| Pulleys | with belt pulley |
| Alternator Charge Current | 70 A |
| Belt Pulley Diameter | 49 mm |
| Weight | 5.15 kg |
| Type | Alternator |
| Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£117.55
Important compatibility info
| Material | Grey Cast Iron |
| Number of grooves | 10 |
| Seal Material | Rubber |
| Water pump impeller material | Plastic |
| Function | Water Pump, engine cooling |
| Number of Wings | 7 |
| Weight | 3.6 kg |
| Type | Water Pump, engine cooling |
| Additional Information | with gaskets/seals |
| Pulleys | with belt pulley |
| for OE number | 58 0193 1331 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£117.55
Important compatibility info
| Additional Information 2 | with nut |
| Function | Drive Shaft |
| Weight | 8.210 kg |
| External Teeth, Wheel Side | 40 |
| Placement on Vehicle | Front Axle Left |
| Additional Information | with Split Pin |
| Thread Size | M10x1,5 |
| Transmission-side joint diameter | 93.5 mm |
| Type | Drive Shaft |
| Wheel Sided Joint Diameter | 92.2 mm |
| External Teeth, Diff.Side | 31 |
| Min. Length | 548 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£117.55
Important compatibility info
| Function | Cylinder Head Cover |
| Weight | 1.728 kg |
| Type | Cylinder Head Cover |
| Colour | Black |
| Paired article numbers | 182648 |
| Material | Plastic |
| Additional Information | with gasket/seal |
| Placement on Vehicle | Left |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£117.55
Important compatibility info
| Outer diameter | 76 mm |
| Operating Mode | Automatic |
| Weight | 0.988 kg |
| Type | Belt Tensioner, v-ribbed belt |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Metal |
| Width of castor bearing surface | 26 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£117.55
Important compatibility info
| Weight | 3.33 kg |
| Placement on Vehicle | Front Axle |
| Length | 1045 mm |
| Additional Information | with rubber mounts |
| Stabiliser Diameter | 19 mm |
| Function | Stabiliser Bar, suspension |
| Type | Stabiliser Bar, suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£117.54
Important compatibility info
| Weight | 1.422 kg |
| Placement on Vehicle | Right |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
| for OE number | 55703651 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£117.51
Important compatibility info
| Weight | 3.23 kg |
| Additional Information | with rubber mounts |
| Stabiliser Diameter | 19 mm |
| Placement on Vehicle | Front Axle |
| Length | 1066 mm |
| Type | Stabiliser Bar, suspension |
| Function | Stabiliser Bar, suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£117.51
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023