Important compatibility info
Placement on Vehicle | Front Axle |
Length | 150 mm |
Rod/Strut | Coupling Rod |
Pipe Diameter | 32 mm |
Function | Link/Coupling Rod, stabiliser bar |
Type | Link/Coupling Rod, stabiliser bar |
Important compatibility info
Rod/Strut | Coupling Rod |
Pipe Diameter | 32 mm |
Type | Link/Coupling Rod, stabiliser bar |
Function | Link/Coupling Rod, stabiliser bar |
Placement on Vehicle | Front Axle |
Length | 150 mm |
Important compatibility info
Function | Centre Rod Assembly |
Type | Centre Rod Assembly |
Length | 817 mm |
Rod/Strut | Push Rod |
Important compatibility info
Placement on Vehicle | Rear Axle |
Width 1 | 81.7 mm |
Outer diameter 2 | 78 mm |
Type | Wheel Bearing Kit |
Bearing Code | Gen 3 |
Function | Wheel Bearing Kit |
Outer diameter 1 | 140 mm |
Important compatibility info
Material | Plastic |
Function | Master Cylinder, clutch |
Type | Master Cylinder, clutch |
Replaces | BCM191 |
Important compatibility info
Rotor Style | Vented |
Number of Holes | 5 |
Outer diameter | 295 mm |
Brake Disc Thickness | 25 mm |
Height | 49.3 mm |
Minimum thickness | 23 mm |
Centering Diameter | 62 mm |
Function | Brake Disc |
Quantity Unit | Set |
Surface | Coated |
Type | Brake Disc Rotor |
Placement on Vehicle | Front Axle |
Number of mounting bores | 2 |
Important compatibility info
Placement on Vehicle | Front Axle Right |
Function | Control/Trailing Arm, wheel suspension |
Steering arm type | Control Arm |
Type | Control/Trailing Arm, wheel suspension |
Paired article numbers | FCA6410 |
Additional Information
- 1x Borg & Beck Mounting, control/trailing arm (BSK6511)
- 1x Borg & Beck Mounting, control/trailing arm (BSK6512)
Important compatibility info
Number of Teeth | 20 |
Hub Profile | 22.3 x 20 |
Outer diameter | 190 mm |
Function | Clutch Kit |
Type | Clutch Kit |
Important compatibility info
Surface | Coated |
Outer diameter | 325 mm |
Function | Brake Disc |
Centering Diameter | 67 mm |
Minimum thickness | 11.4 mm |
Rotor Style | Solid |
Brake Disc Thickness | 14 mm |
Height | 54 mm |
Number of Holes | 5 |
Type | Brake Disc Rotor |
Quantity | 1 |
Placement on Vehicle | Rear Axle |
Number of mounting bores | 1 |
Important compatibility info
Function | Cable Pull, manual transmission |
Length 1 | 1225 mm |
Length 4 | 878 mm |
Length 3 | 1188 mm |
Length 2 | 878 mm |
Type | Cable Pull, manual transmission |
Important compatibility info
Placement on Vehicle | Front Axle Left |
Function | Control/Trailing Arm, wheel suspension |
Steering arm type | Control Arm |
Type | Control/Trailing Arm, wheel suspension |
Paired article numbers | FCA6260 |
Important compatibility info
Bearing/Mounting Type | Rubber-Metal Mount |
Function | Mounting, engine |
Type | Mounting, engine |
Placement on Vehicle | Rear |
Important compatibility info
Placement on Vehicle | Front Axle Right |
Function | Control/Trailing Arm, wheel suspension |
Steering arm type | Control Arm |
Type | Control/Trailing Arm, wheel suspension |
Paired article numbers | FCA6259 |
Important compatibility info
Function | Drive Shaft |
Type | Drive Shaft |
Number of Teeth, ABS ring | 51 |
External Teeth, Diff.Side | 37 |
Seal Diameter | 67.1 mm |
Length | 669 mm |
External Teeth, Wheel Side | 28 |
Placement on Vehicle | Front Axle Left |
Important compatibility info
Placement on Vehicle | Front Axle Left |
Diameter 2 | 108 mm |
External Teeth, Wheel Side | 36 |
Length | 547 mm |
Function | Drive Shaft |
Type | Drive Shaft |
Important compatibility info
Rotor Style | Vented |
Brake Disc Thickness | 28 mm |
Outer diameter | 300 mm |
Number of Holes | 5 |
Height | 52 mm |
Minimum thickness | 26 mm |
Centering Diameter | 63.6 mm |
Function | Brake Disc |
Quantity Unit | Set |
Surface | Coated |
Type | Brake Disc Rotor |
Placement on Vehicle | Front Axle |
Important compatibility info
Number of mounting bores | 1 |
Placement on Vehicle | Rear Axle |
Rotor Style | Vented |
Type | Brake Disc Rotor |
Height | 64.1 mm |
Outer diameter | 300 mm |
Brake Disc Thickness | 20 mm |
Number of Holes | 5 |
Minimum thickness | 18.4 mm |
Centering Diameter | 67 mm |
Quantity Unit | Set |
Function | Brake Disc |
Surface | Coated |
Important compatibility info
Hub Profile | 20 x 17 |
Outer diameter | 215 mm |
Function | Clutch Kit |
Number of Parts | 3 -part |
Type | Clutch Kit |
Number of Teeth | 17 |
Important compatibility info
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Steering arm type | Control Arm |
Length | 293 mm |
Important compatibility info
Length 1 | 692 mm |
Length 2 | 666 mm |
Length 3 | 966 mm |
Length 4 | 946 mm |
Type | Cable Pull, manual transmission |
Function | Cable Pull, manual transmission |






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023