Proud to be a UK-based company
Contact us
Important compatibility info
| Type | Oil Filter |
| Function | Oil Filter |
| Weight | 1.342 kg |
| Seal Diameter | 96 mm |
| Filter type | Spin-on Filter |
| Outer diameter | 118 mm |
| Height | 263 mm |
| Internal Thread Size | 1 5/8" - 12 UNF |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.76
Important compatibility info
| Function | Sensor, wheel speed |
| Cable Length | 1010 mm |
| Paired article numbers | 172157 |
| Number of Connectors / Ports | 2 |
| Placement on Vehicle | Rear Axle Left |
| Weight | 0.109 kg |
| Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£22.89
Important compatibility info
| Weight | 1.08 kg |
| Placement on Vehicle | Intake Side |
| Paired article numbers | 104242 |
| Function | Camshaft Adjuster |
| Extra Description | febi Plus |
| Type | Camshaft Adjuster |
| Additional Information 2 | without screw |
| Number of Teeth | 38 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£63.54
Important compatibility info
| Weight | 0.003 kg |
| Diameter 1 | 18 mm |
| Function | Connector, compressed-air line |
| Type | Connector, compressed-air line |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£4.99
Important compatibility info
| Weight | 5.148 kg |
| External Teeth, Diff.Side | 22 |
| Transmission-side joint diameter | 74.2 mm |
| External Teeth, Wheel Side | 25 |
| Thread Size | M24x1,5 |
| Wheel Sided Joint Diameter | 79 mm |
| Min. Length | 605 mm |
| Type | Drive Shaft |
| Additional Information 2 | with nut |
| Placement on Vehicle | Front Axle Left |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£89.45
Important compatibility info
| Additional Information 2 | with oil sump gasket |
| Weight | 0.376 kg |
| Length | 281 mm |
| Height | 215 mm |
| Width | 158 mm |
| Function | Hydraulic Filter Kit, automatic transmission |
| Transmission Type | CVT Automatic Transmission (stepless) |
| Type | Hydraulic Filter Kit, automatic transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.70
Important compatibility info
| Placement on Vehicle | Left, Right |
| Height | 100 mm |
| Width | 284 mm |
| Number of Connectors / Ports | 6 |
| Light Function | with stop light (LED), with indicator (LED), with rear fog light (LED), with reverse light (LED), with taillight (LED), without number plate light |
| Weight | 0.756 kg |
| Cable Length | 2000 mm |
| Depth | 38 mm |
| Voltage from | 10 V |
| Voltage to | 30 V |
| Protection Type (IP Code) | IP67 |
| Type | Tail Light Assembly |
| Distance of fastening bolts | 152 mm |
| Fulfils ECE norm | R10, R23, R38, R3, R6, R7 |
| Temperature range from | -40 °C |
| Temperature range to | 65 °C |
| Function | Tail Light Assembly |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£60.59
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Length | 50 mm |
| Weight | 0.090 kg |
| Width | 40 mm |
| Material | Rubber with fabric lining |
| Thickness | 50 mm |
| Outer diameter | 40 mm |
| Inner diameter | 13 mm |
| Function | Mounting, stabiliser bar |
| Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.78
Important compatibility info
| Length | 437 mm |
| Height | 53 mm |
| Width | 300 mm |
| Additional Information | with gasket/seal, Oil sump with permanently integrated filter element |
| Additional Information 2 | with bolts/screws |
| Filter type | Screen Filter |
| Weight | 1.55 kg |
| Type | Hydraulic Filter, automatic transmission |
| Function | Hydraulic Filter, automatic transmission |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£85.92
Important compatibility info
| Weight | 1.06 kg |
| Placement on Vehicle | Front Axle Left, Outer, Rear Axle Left, Front Axle Right, Rear Axle Right |
| Width | 31 mm |
| Outer diameter | 110 mm |
| Inner diameter | 70 mm |
| Bearing Type | Tapered Roller Bearing |
| Function | Wheel Bearing |
| Type | Wheel Bearing |
| Bearing Code | 33014 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£23.60
Important compatibility info
| Weight | 0.169 kg |
| Placement on Vehicle | Rear Axle Right |
| Paired article numbers | 104522 |
| Number of Connectors / Ports | 2 |
| Resistance | 1150 Ohm |
| Cable Length | 2960 mm |
| Type | Sensor, wheel speed |
| Function | Sensor, wheel speed |
| Additional Information | with bush |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£24.79
Important compatibility info
| Material | Cast Aluminium |
| Additional Information | with gasket/seal |
| Type | Water Pump, engine cooling |
| Number of Wings | 6 |
| Seal Material | Paper |
| Water pump impeller material | Plastic |
| Function | Water Pump, engine cooling |
| Weight | 1.06 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£50.28
Important compatibility info
| Weight | 0.058 kg |
| Length | 41.5 mm |
| Width | 36 mm |
| Material | Rubber |
| Thickness | 45.6 mm |
| Inner diameter | 22 mm |
| Placement on Vehicle | inner, Front Axle Right, Front Axle Left |
| Function | Mounting, stabiliser bar |
| Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£4.81
Important compatibility info
| Pipe Diameter | 45 mm |
| Min. Length | 249 mm |
| Piston conrod diameter | 13 mm |
| Max. Length | 355 mm |
| Function | Shock Absorber, driver cab suspension |
| Placement on Vehicle | Front |
| Operating Mode | Mechanical |
| Weight | 1.34 kg |
| Shock Absorber Mounting Type | Top pin, Bottom eye |
| External Thread Size | M12 x 1,25 |
| Type | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.36
Important compatibility info
| Weight | 1.303 kg |
| for OE number | 12361-22080 |
| Placement on Vehicle | Front |
| Function | Mounting, engine |
| Type | Mounting, engine |
| Bearing/Mounting Type | Rubber-Metal Mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.87
Important compatibility info
| Weight | 0.1 kg |
| Hose Length | 230 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Function | Radiator Hose |
| Colour | Black |
| Inner diameter | 18 mm |
| Outer diameter | 27 mm |
| Type | Radiator Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£6.65
Important compatibility info
| Weight | 0.040 kg |
| Chain Type | Simplex, with chain lock |
| Number of Chain Links | 86 |
| Type | Timing Chain Kit |
| Function | Timing Chain Kit |
| Extra Description | Basic Short Kit |
| Timing Chain Size | G53HS-8, G53HS-7 |
| Placement on Vehicle | Upper |
| for OE number | 11 31 8 590 950 S4 |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (49508)
- 1x Febi Tensioner, timing chain (28718)
- 1x Febi Guide, timing chain (28726)
- 1x Febi Guide, timing chain (105979)
£85.84
Important compatibility info
| Length | 100 mm |
| Height | 72 mm |
| Width | 72 mm |
| Number of Connectors / Ports | 2 |
| Function | Hand Feed Pump |
| Internal Thread Size | M16 x 1,5 |
| Weight | 0.318 kg |
| Type | Hand Feed Pump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.81
Important compatibility info
| Thickness | 40 mm |
| Type | Brake Disc Rotor |
| Weight | 3.3 kg |
| Function | Brake Disc |
| Centering Diameter | 60 mm |
| Rotor Style | internally vented |
| Surface | Coated |
| Minimum thickness | 15 mm |
| Bolt Hole Circle Diameter | 100 mm |
| Outer diameter | 231 mm |
| Rim Hole Number | 4 -Hole |
| Brake Disc Thickness | 17 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£45.18
Important compatibility info
| Material | ACM (Polyacrylate), PTFE (polytetrafluoroethylene) |
| Outer diameter | 47 mm |
| Function | Shaft Seal, camshaft |
| Rotation Direction | Clockwise rotation |
| Inner diameter | 27 mm |
| Weight | 14.8 kg |
| Placement on Vehicle | frontal sided |
| Thickness | 7 mm |
| Type | Shaft Seal, camshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£9.71
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023