Proud to be a UK-based company
Contact us
Important compatibility info
| External Thread Size | M16 x 2, M12 x 1,5, M22 x 1,5, M8 x 1,25, M12 x 1,75 |
| Additional Information | with piston |
| Rolling piston material | Plastic |
| Weight | 6.6 kg |
| Type | Bellow, air suspension |
| Function | Bellow, air suspension |
| Outer diameter | 258 mm |
| Thickness | 695 mm. 200 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£115.79
Important compatibility info
| Weight | 7.750 kg |
| Material | Grey Cast Iron |
| Number of Wings | 12 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Grey Cast Iron |
| Additional Information | with gasket/seal |
| Type | Water Pump, engine cooling |
| for OE number | 51.06500.6669 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£115.70
Important compatibility info
| Number of Connectors / Ports | 6 |
| for OE number | 4 515 688 |
| Weight | 0.038 kg |
| Type | Mass Air Flow Sensor |
| Function | Mass Air Flow Sensor |
| Resistor Type | Hot-film Sensor |
| Housing Type | without housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£115.69
Important compatibility info
| Rotor Style | Internally Vented |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 358 mm |
| Thickness | 73.5 mm |
| Brake Disc Thickness | 28 mm |
| Minimum thickness | 26 mm |
| Bolt Hole Circle Diameter | 130 mm |
| Centering Diameter | 85 mm |
| Surface | Coated |
| Number of mounting bores | 2 |
| Function | Brake Disc |
| Weight | 9.66 kg |
| Rim Hole Number | 5 -Hole |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£115.69
Important compatibility info
| Outer diameter | 17.5 mm |
| Operating Mode | Hydraulic |
| Rotation Direction | Clockwise rotation |
| Weight | 1.753 kg |
| Number of mounting bores | 3 |
| for OE number | 49 11 009 15R |
| Mounting points diameter | 8 mm |
| Type | Hydraulic Pump, steering |
| Operating pressure to | 12 bar |
| Function | Hydraulic Pump, steering |
| Internal Thread Size | M16 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£115.64
Important compatibility info
| Weight | 2.40 kg |
| Placement on Vehicle | Front Axle |
| Width | 150 mm |
| Outer diameter | 150 mm |
| Thickness | 89.6 mm |
| Inner diameter | 22 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Function | Wheel Bearing Kit |
| Bearing Type | Tapered Roller Bearing |
| Type | Wheel Bearing Kit |
| Additional Information 2 | Wheel Bearing integrated into wheel hub |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Wheel Bearing (27163)
- 1x Febi Wheel Bearing (27164)
- 1x Febi Shaft Seal, wheel hub (38868)
- 1x Febi Shaft Seal, wheel hub (27165)
£115.57
Important compatibility info
| Weight | 6.952 kg |
| Placement on Vehicle | Lower Front Axle, Left |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 21303 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | without ball joint |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£115.57
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 1646 mm |
| Rod/Strut | Guide Rod |
| Weight | 11.0 kg |
| Cone Size | 30 mm |
| Pipe Diameter | 40 mm |
| Internal Thread Size | M30 x 1,5 LHT, M30 x 1,5 RHT |
| External Thread Size | M24 x 1,5 |
| Function | Tie Rod |
| Extra Description | ProKit |
| Type | Tie Rod |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£115.57
Important compatibility info
| Width | 57 mm |
| Outer diameter | 166 mm |
| Inner diameter | 35 mm |
| Number of Ribs | 7 |
| Parameter | 6PK + 3PK |
| Type | Belt Pulley, crankshaft |
| Function | Belt Pulley, crankshaft |
| Weight | 1.944 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£115.57
Important compatibility info
| Outer diameter | 70 mm |
| Weight | 1.164 kg |
| Operating Mode | Automatic |
| Function | Belt Tensioner, v-ribbed belt |
| Width of castor bearing surface | 35 mm |
| Track rollers material | Metal |
| Housing material | Aluminium |
| Type | Belt Tensioner, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£115.57
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023