Proud to be a UK-based company
Contact us
Important compatibility info
| Weight | 0.102 kg |
| Length | 1200 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of Ribs | 6 |
| Type | V-Ribbed Belt |
| Function | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£10.59
Important compatibility info
| Additional Information | with lock nut |
| Placement on Vehicle | Upper, Front Axle Left, Front Axle Right |
| Steering arm type | for control arm |
| Weight | 0.32 kg |
| Cone Size | 16.3 mm |
| Type | Ball Joint |
| Function | Ball Joint |
| Extra Description | ProKit |
| External Thread Size | M12 x 1,75 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£13.70
Important compatibility info
| Type | Mounting, engine |
| Function | Mounting, engine |
| Weight | 1.768 kg |
| Bearing/Mounting Type | Hydro Mount |
| Placement on Vehicle | Right, Front |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£115.18
Important compatibility info
| Weight | 0.22 kg |
| Placement on Vehicle | Front Axle, Wheel Side |
| Length | 114 mm |
| Material | Thermoplast |
| Inner diameter 1 | 26 mm |
| Inner diameter 2 | 81 mm |
| Function | Bellow Kit, drive shaft |
| Type | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (29962)
- 1x Febi Clamping Clip (38757)
- 1x Febi Clamping Clip (45643)
- 1x Febi Molybdenum Grease (02582)
£15.74
Important compatibility info
| Weight | 0.152 kg |
| Material | Plastic |
| Outer diameter | 76 mm |
| Function | Deflection/Guide Pulley, v-ribbed belt |
| Mounting points diameter | 17 mm |
| Width of castor bearing surface | 28 mm |
| Type | Deflection/Guide Pulley, v-ribbed belt |
| Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£13.16
Important compatibility info
| Extra Description | febi Plus |
| Weight | 0.017 kg |
| Colour | Black |
| Number of Connectors / Ports | 2 |
| Type | Switch, tailgate release |
| Material | Plastic |
| Function | Switch, tailgate release |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.75
Important compatibility info
| Weight | 2.035 kg |
| Piston Diameter | 19.1 mm |
| Placement on Vehicle | Rear Axle |
| Width | 32 mm |
| Outer diameter | 180 mm |
| Inspection Tag | ECE R90 Approved |
| Mounting Type | Pre-assembled |
| Function | Brake Shoe Set |
| Type | Brake Shoe Set |
| Additional Information | with wheel brake cylinder, with accessories, with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£66.30
Important compatibility info
| Weight | 3.5 kg |
| Number of Wings | 9 |
| Type | Fan, engine cooling |
| Function | Fan, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£291.56
Important compatibility info
| Number of Ribs | 6 |
| Function | V-Ribbed Belt |
| Weight | 0.17 kg |
| Length | 1670 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.14
Important compatibility info
| Weight | 0.250 kg |
| Function | Pipe Connector, exhaust system |
| Inner diameter | 132 mm |
| Pipe Connector | Clamping Clip |
| Thickness | 28 mm |
| Outer diameter | 151 mm |
| Type | Pipe Connector, exhaust system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£8.89
Important compatibility info
| Weight | 0.95 kg |
| Number of Teeth | 122 |
| Function | Timing Belt Kit |
| Type | Timing Belt Kit |
| Replaces | 14638 |
| Width | 26.5 mm |
| Belts | with rounded tooth profile |
| Units / Pulleys | incl. tensioner pulley |
Additional Information
Technical Information
The diamond-coated washer included in this kit has to be used to replace the formerly fitted washer.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt (14370)
- 1x Febi Tensioner Pulley, timing belt (11560)
- 1x Febi Pulley Bolt (17232)
- 1x Febi Washer, crankshaft pulley (31815)
£71.38
Important compatibility info
| Length | 243 mm |
| Width | 170 mm |
| Filter type | Filter Insert |
| Function | Air Filter |
| Weight | 0.18 kg |
| Type | Air Filter |
| Height | 47 mm |
| Additional Information 2 | without pre-filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£8.20
Important compatibility info
| Height | 130 mm |
| Outer diameter | 107 mm |
| Inner diameter | 92 mm |
| Internal Thread Size | 1" - 14 UNS |
| Function | Fuel filter |
| Filter type | Spin-on Filter |
| Weight | 0.697 kg |
| Type | Fuel filter |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£22.73
Important compatibility info
| Spanner Size | 22 |
| Weight | 0.082 kg |
| Cable Length | 400 mm |
| Number of circuits | 4 |
| Lambda Sensor | Heated |
| Type | Oxygen Sensor |
| Function | Oxygen Sensor |
| External Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£48.61
Important compatibility info
| Function | Bellow, air suspension |
| Type | Bellow, air suspension |
| Weight | 7.0 kg |
| Thickness | 112 mm. 279 mm |
| Placement on Vehicle | Rear Axle |
| Additional Information | with piston, with piston rod |
| Outer diameter | 227 mm. 205 mm |
| External Thread Size | 1/2" - 13 UNC, 3/4" - 16 UNF |
| Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£114.13
Important compatibility info
| External Thread Size | M18 x 1,5 |
| Function | Oxygen Sensor |
| Number of Connectors / Ports | 4 |
| Weight | 0.1 kg |
| for OE number | 96423429 |
| Cable Length | 400 mm |
| Number of circuits | 4 |
| Lambda Sensor | Heated |
| Type | Oxygen Sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.70
Important compatibility info
| Type | Mounting, engine |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Weight | 7.460 kg |
| Placement on Vehicle | Right |
| Function | Mounting, engine |
| Paired article numbers | 176914 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£160.07
Important compatibility info
| Weight | 0.871 kg |
| Additional Information 2 | without ball bearing |
| Material | Rubber/Metal |
| Type | Suspension Strut Support Mount |
| Placement on Vehicle | Front Axle |
| Function | Suspension Strut Support Mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£23.07
Important compatibility info
| Weight | 0.24 kg |
| Placement on Vehicle | Front Axle Left, Lower, Front, Front Axle Right |
| Outer diameter | 40 mm |
| Thickness | 77 mm |
| Inner diameter | 16 mm |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, control/trailing arm |
| Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.05
Important compatibility info
| Placement on Vehicle | Front, Rear Axle Left, Rear Axle Right |
| Outer diameter | 109 mm |
| Weight | 0.782 kg |
| Function | Bushing, axle beam |
| Material | Rubber/Metal |
| Type | Bushing, axle beam |
| Thickness | 93 mm |
| Inner diameter | 21 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.98
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023