Important compatibility info
Surface | Coated |
Outer diameter | 331 mm |
Function | Brake Disc |
Quantity Unit | Set |
Centering Diameter | 110 mm |
Minimum thickness | 16 mm |
Number of Holes | 5 |
Rotor Style | Vented |
Type | Brake Disc Rotor |
Height | 103 mm |
Brake Disc Thickness | 18 mm |
Placement on Vehicle | Rear Axle |
Number of mounting bores | 7 |
Important compatibility info
Width | 32 mm |
Quantity Unit | Set |
Function | Brake Shoe Set |
Type | Brake Shoe Set |
Placement on Vehicle | Rear Axle |
Important compatibility info
Additional Information | with gaskets/seals |
Additional Information 2 | with flange |
Operating Mode | electronically controlled |
Opening Temperature | 105 °C |
Housing Type | with housing |
Type | Thermostat, coolant |
Housing material | Plastic |
Function | Thermostat, coolant |
Important compatibility info
Length 1 | 1181 mm |
Function | Cable Pull, manual transmission |
Length 2 | 843 mm |
Length 3 | 1190 mm |
Type | Cable Pull, manual transmission |
Length 4 | 808 mm |
Important compatibility info
Placement on Vehicle | Front Axle |
Surface | Coated |
Rotor Style | Vented |
Number of Holes | 5 |
Outer diameter | 274 mm |
Brake Disc Thickness | 22 mm |
Height | 47.5 mm |
Minimum thickness | 20 mm |
Centering Diameter | 72 mm |
Function | Brake Disc |
Quantity Unit | Set |
Type | Brake Disc Rotor |
Number of mounting bores | 3 |
Important compatibility info
External Teeth, Wheel Side | 25 |
Length | 869 mm |
External Teeth, Diff.Side | 24 |
Function | Drive Shaft |
Number of Teeth, ABS ring | 48 |
Placement on Vehicle | Front Axle Right |
Type | Drive Shaft |
Additional Information
- 1x Borg & Beck Joint Kit, drive shaft (BCJ1204)
Important compatibility info
Placement on Vehicle | Rear Axle Left, Rear Axle Right, Lower |
Length | 412 mm |
Material | Steel |
Steering arm type | Control Arm |
Mounting points diameter | 14.2 mm |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Important compatibility info
Rotor Style | Vented |
Number of Holes | 5 |
Outer diameter | 285 mm |
Brake Disc Thickness | 28 mm |
Height | 43.5 mm |
Minimum thickness | 26 mm |
Centering Diameter | 59 mm |
Function | Brake Disc |
Quantity Unit | Set |
Type | Brake Disc Rotor |
Surface | Coated |
Placement on Vehicle | Front Axle |
Number of mounting bores | 1 |
Important compatibility info
Placement on Vehicle | Rear Axle |
Surface | Coated |
Outer diameter | 325 mm |
Function | Brake Disc |
Centering Diameter | 63.5 mm |
Minimum thickness | 18.0 mm |
Number of Holes | 5 |
Brake Disc Thickness | 20 mm |
Height | 42 mm |
Rotor Style | Vented |
Type | Brake Disc Rotor |
Quantity Unit | Set |
Number of mounting bores | 1 |
Important compatibility info
Inner diameter 1 | 50 mm |
Additional Information 2 | with integrated ABS sensor |
Outer diameter 2 | 80 mm |
Width 1 | 43 mm |
Outer diameter 1 | 122 mm |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Function | Wheel Bearing Kit |
Type | Wheel Bearing Kit |
Bearing Code | Gen 3 |
Important compatibility info
Function | Master Cylinder, clutch |
Type | Master Cylinder, clutch |
Important compatibility info
Function | Control/Trailing Arm, wheel suspension |
Steering arm type | Control Arm |
Type | Control/Trailing Arm, wheel suspension |
Paired article numbers | FCA7030 |
Placement on Vehicle | Front Axle Right, Lower |
Important compatibility info
Important compatibility info
Inner diameter | 10 mm |
Width | 60 mm |
Function | Mounting, engine |
Bearing/Mounting Type | Rubber-Metal Mount |
Placement on Vehicle | Rear |
Outer diameter | 11 mm |
Type | Mounting, engine |
Length | 100 mm |
Important compatibility info
Placement on Vehicle | Front Axle Right, Lower |
Function | Control/Trailing Arm, wheel suspension |
Steering arm type | Control Arm |
Type | Control/Trailing Arm, wheel suspension |
Paired article numbers | FCA7518 |
Important compatibility info
Inner diameter 1 | 25 mm |
Type | Wheel Bearing Kit |
Function | Wheel Bearing Kit |
Placement on Vehicle | Rear Axle |
Important compatibility info
Function | Mounting, engine |
Bearing/Mounting Type | Hydro Mount |
Type | Mounting, engine |
Placement on Vehicle | Upper Left |
Important compatibility info
Length 1 | 1000 mm |
Length 2 | 650 mm |
Function | Cable Pull, manual transmission |
Length 3 | 875 mm |
Length 4 | 676 mm |
Type | Cable Pull, manual transmission |
Important compatibility info
Water Pump Pulley Diameter | 114 mm |
Function | Water Pump, engine cooling |
Number of Ribs | 5 |
Impeller Diameter | 54 mm |
Type | Water Pump, engine cooling |
Water pump impeller material | Plastic |
Important compatibility info






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023