Proud to be a UK-based company
Contact us
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Additional Information 2 | with screw |
| Thread Size | M10x1,5 |
| External Teeth, Wheel Side | 40 |
| Weight | 7.340 kg |
| External Teeth, Diff.Side | 31 |
| Min. Length | 590 mm |
| Wheel Sided Joint Diameter | 91.3 mm |
| Transmission-side joint diameter | 88.4 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£119.04
Important compatibility info
| Weight | 0.102 kg |
| Type | Oxygen Sensor |
| Number of circuits | 4 |
| Cable Length | 625 mm |
| Lambda Sensor | Heated |
| External Thread Size | M18 x 1,5 |
| Function | Oxygen Sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£119.02
Important compatibility info
| Additional Information | with rubber mounts |
| for OE number | 204 326 04 65 S1 |
| Function | Stabiliser Bar, suspension |
| Placement on Vehicle | Rear Axle |
| Stabiliser Diameter | 16 mm |
| Type | Stabiliser Bar, suspension |
| Weight | 4.41 kg |
| Additional Information 2 | with coupling rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Stabiliser Bar, suspension (171135)
- 1x Febi Link/Coupling Rod, stabiliser bar (29695)
- 1x Febi Link/Coupling Rod, stabiliser bar (29694)
- 2x Febi Nut (06859)
£119.01
Important compatibility info
| Width | 23 mm |
| Number of Teeth | 150 |
| Surface | Coated |
| Water pump impeller material | Plastic |
| Belt Material | HNBR (hydrogenated nitrile butadiene rubber) |
| Type | Water Pump & Timing Belt Kit |
| Function | Water Pump & Timing Belt Kit |
| Weight | 1.401 kg |
| Belts | with rounded tooth profile |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt Kit (173220)
- 1x Febi Water Pump, engine cooling (15900)
£118.99
Important compatibility info
| Outer diameter | 73 mm |
| Weight | 3.520 kg |
| Bearing Type | Tapered Roller Bearing |
| Width | 55 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Inner diameter | 40 mm |
| Sealing lip material | NBR (nitrile butadiene rubber) |
| Function | Wheel Bearing Kit |
| Type | Wheel Bearing Kit |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with ABS sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£118.99
Important compatibility info
| Min. Length | 471 mm |
| Pipe Diameter | 73 mm. 63 mm |
| Weight | 4.16 kg |
| Shock Absorber Design | Telescopic Shock Absorber |
| Placement on Vehicle | Rear Axle |
| Function | Shock Absorber |
| Mounting points diameter | 24 mm |
| Piston conrod diameter | 20 mm |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 764 mm |
| Shock Absorber Type | Oil Pressure |
| Type | Shock Absorber |
| Replaces | 20116 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£118.97
Important compatibility info
| Function | Air Tank, compressed-air system |
| Weight | 17.2 kg |
| Material | Steel |
| Outer diameter | 396 mm |
| Length | 750 mm |
| Capacity | 80 l |
| Operating Pressure | 10 bar |
| Number of Connectors / Ports | 4 |
| Internal Thread Size | M22 x 1,5 |
| Type | Air Tank, compressed-air system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£118.90
Important compatibility info
| Function | Spring-loaded Cylinder |
| Piston Rod Length | 15 mm |
| Distance of fastening bolts | 120 mm |
| Type | Spring-loaded Cylinder |
| Stroke | 64 mm |
| Internal Thread Size | M16 x 1,5 |
| Parameter | Typ 24/30 |
| Brake Type | Disc Brake |
| Weight | 11.00 kg |
| Additional Information | with fastening/mounting material |
| Placement on Vehicle | Rear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£118.90
Important compatibility info
| Type | Water Pump & Timing Belt Kit |
| Function | Water Pump & Timing Belt Kit |
| Number of Teeth | 148 |
| Surface | PTFE (Polytetrafluorethylene) coated |
| Weight | 1.697 kg |
| Width | 23 mm |
| Belts | with trapezoidal tooth profile |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Water Pump, engine cooling (30618)
- 1x Febi Timing Belt Kit (30586)
£118.90
Important compatibility info
| Weight | 1.466 kg |
| Number of Holes | 6 |
| Placement on Vehicle | Front |
| Thickness | 12 mm |
| Bolt Hole Circle Diameter | 110 mm |
| Function | Joint, propshaft |
| Type | Joint, propshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£118.88
Important compatibility info
| Additional Information | with gaskets/seals, with oil filter, with oil cooler |
| Weight | 1.5 kg |
| Type | Housing, oil filter |
| Function | Housing, oil filter |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£118.87
Important compatibility info
| Weight | 1.030 kg |
| Outer diameter | 119 mm |
| Number of Teeth | 38 |
| Operating Mode | Hydraulic |
| Spanner Size | 18 |
| Quality/ Grade | 10.9 |
| Additional Information 2 | with screw |
| Function | Camshaft Adjuster |
| Extra Description | febi Plus |
| Type | Camshaft Adjuster |
| External Thread Size | M12 x 1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£118.84
Important compatibility info
| Weight | 9.47 kg |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 280 mm |
| Thickness | 102.3 mm |
| Brake Disc Thickness | 12 mm |
| Minimum thickness | 10 mm |
| Bolt Hole Circle Diameter | 118 mm |
| Centering Diameter | 65 mm |
| Surface | Oiled |
| Function | Brake Disc |
| Rotor Style | Solid |
| Type | Brake Disc Rotor |
| Rim Hole Number | 5 -Hole |
| Additional Information 2 | with ABS sensor ring, with grease cap |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£118.83
Important compatibility info
| Placement on Vehicle | Rear |
| Weight | 3.855 kg |
| Type | Repair Kit, driver cab suspension |
| Function | Repair Kit, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£118.73
Important compatibility info
| Function | Bellow, air suspension |
| Thickness | 110 mm. 292 mm |
| Type | Bellow, air suspension |
| Additional Information | with piston |
| External Thread Size | M16 x 1,5, M10 x 1,5 |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Outer diameter | 259 mm. 190 mm |
| Weight | 7.8 kg |
| Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£118.72
Important compatibility info
| Function | Shock Absorber |
| Pipe Diameter | 76 mm. 63.4 mm |
| Mounting points diameter | 20 mm |
| Piston conrod diameter | 20 mm |
| Shock Absorber Mounting Type | Top pin, Bottom eye |
| Max. Length | 635 mm |
| Min. Length | 417 mm |
| Shock Absorber Type | Oil Pressure |
| Replaces | 20146 |
| Weight | 5.58 kg |
| Placement on Vehicle | Front Axle |
| External Thread Size | M16 x 1,5 |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£118.70
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 1625 mm |
| Outer diameter | 52 mm |
| Cone Size | 32 mm |
| Weight | 13.431 kg |
| Pipe Diameter | 52 mm |
| Function | Tie Rod |
| Extra Description | ProKit |
| Type | Tie Rod |
| External Thread Size | M27 x 1,5, M30 x 1,5 |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£118.67
Important compatibility info
| Width | 100 mm |
| Outer diameter | 216 mm. 45 mm |
| Parameter | 6PK |
| Type | Belt Pulley, crankshaft |
| Function | Belt Pulley, crankshaft |
| Inner diameter | 32 mm |
| Number of Ribs | 5 |
| Weight | 4.814 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£118.61
Important compatibility info
| Placement on Vehicle | Rear |
| Operating Mode | Pneumatic |
| Shock Absorber Mounting Type | Top eye, Bottom Pin |
| Max. Length | 275 mm |
| Min. Length | 233 mm |
| Pipe Diameter | 42 mm |
| Mounting points diameter | 14 mm |
| Piston conrod diameter | 12 mm |
| Function | Shock Absorber, driver cab suspension |
| Weight | 2.73 kg |
| External Thread Size | M14 x 1,5 |
| Type | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£118.54
Important compatibility info
| Pipe Diameter | 50 mm |
| Adjustable | Adjustable on one side |
| Length | 997 mm |
| Brake Type | Disc Brake |
| Function | Centre Rod Assembly |
| Type | Centre Rod Assembly |
| Additional Information 2 | with crown nut |
| Thread Size | M24 x 1,5 |
| Extra Description | ProKit |
| Cone Size | 30 mm |
| Weight | 9.250 kg |
| Rod/Strut | Push Rod |
| Placement on Vehicle | Front Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£118.54
Important compatibility info
| Weight | 0.180 kg |
| Colour | Grey |
| Number of Connectors / Ports | 10 |
| Combi Switch Function | with klaxon, with light dimmer function, with indicator function, with high beam function |
| Function | Steering Column Switch |
| Type | Steering Column Switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£118.54
Important compatibility info
| Voltage | 12 V |
| Number of Ribs | 5 |
| Pulleys | with belt pulley |
| Alternator Charge Current | 70 A |
| Belt Pulley Diameter | 52 mm |
| Weight | 5.12 kg |
| Current Strength | 70 A |
| Type | Alternator |
| Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£118.54
Important compatibility info
| Thickness | 125 mm |
| Function | Clutch, radiator fan |
| Weight | 2.117 kg |
| Outer diameter | 165 mm |
| for OE number | 904 200 08 22 |
| Type | Clutch, radiator fan |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£118.54
Important compatibility info
| Function | Tilt Pump, driver cab |
| Pressure side external thread size | M12 x 1,5 |
| Number of Connectors / Ports | 2 |
| Operating Mode | Manual |
| Weight | 3.5 kg |
| Suction side external thread size | M12 x 1,5 |
| Internal Thread Size | M10 x 1,5 |
| Type | Tilt Pump, driver cab |
| Hole Spacing | 85 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£118.54
Important compatibility info
| Weight | 0.658 kg |
| Length | 1150 mm |
| Width | 387 mm |
| Material | Rubber |
| Thickness | 18 mm |
| Function | Gasket, oil sump |
| Type | Gasket, oil sump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£118.54
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 1646 mm |
| Rod/Strut | Guide Rod |
| Weight | 11.0 kg |
| Cone Size | 30 mm |
| Pipe Diameter | 40 mm |
| Internal Thread Size | M30 x 1,5 LHT, M30 x 1,5 RHT |
| External Thread Size | M24 x 1,5 |
| Function | Tie Rod |
| Extra Description | ProKit |
| Type | Tie Rod |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£118.54
Important compatibility info
| Function | EGR Valve |
| for OE number | 11 71 7 804 379 |
| Type | EGR Valve |
| Weight | 0.651 kg |
| Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£118.54
Important compatibility info
| Additional Information | with gaskets/seals |
| Weight | 1.006 kg |
| Function | EGR Valve |
| Type | EGR Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£118.54
Important compatibility info
| Additional Information 2 | with crown nut |
| Length | 908 mm |
| Weight | 9.700 kg |
| Placement on Vehicle | Front Axle |
| Function | Centre Rod Assembly |
| External Thread Size | M20 x 1,5 |
| Cone Size | 28.6 mm |
| Rod/Strut | Push Rod |
| Adjustable | Adjustable on one side |
| Extra Description | ProKit |
| Type | Centre Rod Assembly |
| Pipe Diameter | 52 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£118.54
Important compatibility info
| Number of Ribs | 6 |
| Voltage | 12 V |
| Function | Alternator |
| Belt Pulley Diameter | 54 mm |
| Weight | 5.15 kg |
| Type | Alternator |
| Alternator Charge Current | 90 A |
| Pulleys | with freewheel belt pulley |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£118.54
Important compatibility info
| Weight | 0.403 kg |
| Chain Type | Silent Chain, Closed chain |
| Number of Chain Links | 136 |
| Timing Chain Size | G53RING-2 |
| Type | Timing Chain |
| Function | Timing Chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£118.54
Important compatibility info
| Material | Grey Cast Iron |
| Number of grooves | 10 |
| Seal Material | Rubber |
| Water pump impeller material | Plastic |
| Function | Water Pump, engine cooling |
| Number of Wings | 7 |
| Weight | 3.6 kg |
| Type | Water Pump, engine cooling |
| Additional Information | with gaskets/seals |
| Pulleys | with belt pulley |
| for OE number | 58 0193 1331 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£118.54
Important compatibility info
| Voltage | 12 V |
| Number of Ribs | 5 |
| Pulleys | with belt pulley |
| Alternator Charge Current | 100 A |
| Belt Pulley Diameter | 55 mm |
| Weight | 6.4 kg |
| Current Strength | 100 A |
| Type | Alternator |
| Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£118.54
Important compatibility info
| Pipe Diameter | 30 mm |
| Function | Centre Rod Assembly |
| Length | 1080 mm |
| Rod/Strut | Guide Rod |
| Adjustable | Adjustable on one side |
| Weight | 5.8 kg |
| Type | Centre Rod Assembly |
| Additional Information 2 | with crown nut |
| Extra Description | ProKit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£118.54
Important compatibility info
| Placement on Vehicle | Right |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Weight | 1.250 kg |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£118.53
Important compatibility info
| Additional Information 2 | with sensor |
| Type | Housing, oil filter |
| Function | Housing, oil filter |
| Extra Description | febi Plus |
| Weight | 1.5 kg |
| Additional Information | with gasket/seal, with oil cooler, with oil filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£118.53
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Cone Size | 22 mm |
| Weight | 3.566 kg |
| Paired article numbers | 175397 |
| Additional Information 2 | with ball joint |
| Steering arm type | Control Arm |
| Material | Aluminium |
| Placement on Vehicle | Front Axle Left, Lower |
| External Thread Size | M14 x 1,5 |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£118.53
Important compatibility info
| Paired article numbers | 42669 |
| Type | Control/Trailing Arm, wheel suspension |
| Material | Aluminium |
| Function | Control/Trailing Arm, wheel suspension |
| Weight | 3.76 kg |
| Additional Information 2 | with ball joint |
| Steering arm type | Control Arm |
| Placement on Vehicle | Front Axle Right, Lower |
| Additional Information | with crown nut and split pin, with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£118.53
Important compatibility info
| Rated Power | 2.2 kW |
| Number of Teeth | 9 |
| Function | Starter |
| Voltage | 12 V |
| Weight | 5.7 kg |
| Type | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£118.50
Important compatibility info
| Number of Connectors / Ports | 2 |
| Function | Interior Blower |
| Weight | 1.4 kg |
| Type | Interior Blower |
| Voltage | 12 V |
| Placement on Vehicle | Front |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£118.50
Important compatibility info
| Weight | 0.850 kg |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Metal |
| Operating Mode | Automatic |
| Outer diameter | 70 mm |
| Width of castor bearing surface | 31.5 mm |
| Type | Belt Tensioner, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£118.50
Important compatibility info
| Type | Protection Lid, wheel hub |
| Weight | 9.99 kg |
| Function | Protection Lid, wheel hub |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£118.50
Important compatibility info
| Voltage | 12 V |
| Number of Ribs | 5 |
| Pulleys | with belt pulley |
| Alternator Charge Current | 90 A |
| Belt Pulley Diameter | 54 mm |
| Weight | 4.732 kg |
| Type | Alternator |
| Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£118.50
Important compatibility info
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 134 |
| Function | Timing Chain Kit |
| Weight | 0.82 kg |
| Type | Timing Chain Kit |
| for OE number | 12 645 237 S2 |
| Timing Chain Size | 134 E |
| Extra Description | Standard Medium Kit |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (33047)
- 1x Febi Tensioner, timing chain (33048)
- 1x Febi Guide, timing chain (173744)
- 1x Febi Guide, timing chain (173888)
- 1x Febi Guide, timing chain (173891)
- 4x Febi Screw (33067)
- 3x Febi Screw (33068)
£118.50
Important compatibility info
| Voltage | 12 V |
| Number of Teeth | 10 |
| Rated Power | 2.2 kW |
| Weight | 6.0 kg |
| Type | Starter |
| Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£118.50
Important compatibility info
| Weight | 4.4 kg |
| Voltage | 12 V |
| Type | Starter |
| Number of Teeth | 10 |
| Rated Power | 2.0 kW |
| Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£118.50
Important compatibility info
| Function | Starter |
| Weight | 4.92 kg |
| Type | Starter |
| Voltage | 12 V |
| Rated Power | 2 kW |
| Number of Teeth | 9 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£118.50
Important compatibility info
| Function | V-Ribbed Belt Set |
| Weight | 4.034 kg |
| Extra Description | ProKit |
| Type | V-Ribbed Belt Set |
| Units / Pulleys | incl. deflection pulley |
| Length 1 | 1342 mm |
| Additional Information | with clamping elements |
| Length 2 | 1526 mm |
| Number of ribs 2 | 8 |
| Belt Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of ribs 1 | 10 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Deflection/Guide Pulley, v-ribbed belt (38983)
- 1x Febi V-Ribbed Belt (40707)
- 1x Febi V-Ribbed Belt (34350)
- 2x Febi Belt Tensioner, v-ribbed belt (27117)
£118.50
Important compatibility info
| Placement on Vehicle | Right |
| Weight | 2.81 kg |
| for OE number | 246 240 25 17 |
| Function | Mounting, engine |
| Bearing/Mounting Type | Hydro Mount |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£118.50
Important compatibility info
| Outer diameter | 240 mm. 200 mm |
| Weight | 9.9 kg |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| External Thread Size | M12 x 1,75, M16 x 1,5 |
| Function | Bellow, air suspension |
| Thickness | 188 mm. 480 mm |
| Additional Information | with piston |
| Type | Bellow, air suspension |
| Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£118.49
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023