invoice Page 352 of 3738
Results 3511 - 3520 of 37372
Part number: 181979
Please enter your vehicle information above to check this fits your vehicle!
Filter type Activated Carbon Filter, High efficiency air filter (HEPA)
Height 31 mm
Weight 1.290 kg
Type Filter, cabin air
Function Filter, cabin air
Length 1022 mm
Width 318 mm

Additional Information

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Febi 181979 Pollen / Cabin Filter
ONLY
£112.53
Quantity:
Please enter your vehicle information above to check this fits your vehicle!
Length 609 mm
Material Steel
Outer diameter 300 mm
Number of Connectors / Ports 7
Weight 10.4 kg
Capacity 36 l
Operating Pressure 12.5 bar
Type Air Tank, compressed-air system
Function Air Tank, compressed-air system
Internal Thread Size M22 x 1,5

Additional Information

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Febi 193708 Air Tank, compressed-air system
ONLY
£112.52
Quantity:
Part number: 105769
Please enter your vehicle information above to check this fits your vehicle!
Housing Type with housing
Number of Connectors / Ports 4
Resistor Type Hot-film Sensor
Function Mass Air Flow Sensor
Additional Information with gasket/seal
Weight 0.189 kg
Type Mass Air Flow Sensor
for OE number 1920.QV

Additional Information

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Febi 105769 Air Mass Sensor
ONLY
£112.49
Quantity:
Part number: 193516
Please enter your vehicle information above to check this fits your vehicle!
Function Drive Shaft
External Teeth, Wheel Side 28
Min. Length 622 mm
Type Drive Shaft
Weight 8.250 kg
Thread Size M22x1,5
Paired article numbers 193517
External Teeth, Diff.Side 24
Placement on Vehicle Front Axle Left
Additional Information 2 with nut
Additional Information with axle nut

Additional Information

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Febi 193516 Drive Shaft
ONLY
£112.42
Quantity:
Part number: 45306
Please enter your vehicle information above to check this fits your vehicle!
Weight 3.32 kg
Placement on Vehicle Front Axle
Length 1035 mm
Function Stabiliser Bar, suspension
Type Stabiliser Bar, suspension
Additional Information 2 without coupling rod
Stabiliser Diameter 23.6 mm

Additional Information

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

  • 1x Febi Stabiliser Bar, suspension (45304)
  • 4x Febi Fastening Bolt, stabiliser bar (45305)
Febi 45306 Anti Roll Bar
ONLY
£112.40
Quantity:
Part number: 176440
Please enter your vehicle information above to check this fits your vehicle!
Extra Description febi Plus
Function Fitting, intake manifold
Type Fitting, intake manifold
Weight 3.593 kg
Material Plastic
Additional Information with gaskets/seals

Additional Information

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Febi 176440 Intake Manifold
ONLY
£112.37
Quantity:
Please enter your vehicle information above to check this fits your vehicle!
Additional Information with coolant level sensor
Material Plastic
Additional Information 2 with lid
Weight 1.17 kg
Type Expansion Tank, coolant
Function Expansion Tank, coolant

Additional Information

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Febi 193894 Coolant Expansion Tank
ONLY
£112.37
Quantity:
Part number: 184257
Please enter your vehicle information above to check this fits your vehicle!
Placement on Vehicle Left, Upper
Weight 3.832 kg
Bearing/Mounting Type Rubber-Metal Mount
Type Mounting, manual transmission
Function Mounting, manual transmission

Additional Information

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Febi 184257 Gearbox Mounting
ONLY
£112.36
Quantity:
Please enter your vehicle information above to check this fits your vehicle!
Placement on Vehicle Front Axle
Shock Absorber Type Oil Pressure
Shock Absorber Mounting Type Top eye, Bottom eye
Max. Length 414 mm
Min. Length 382 mm
Mounting points diameter 16 mm
Function Shock Absorber
Weight 5.0 kg
Type Shock Absorber
Shock Absorber Design Telescopic Shock Absorber
Pipe Diameter 70 mm. 50 mm
Piston conrod diameter 12 mm

Additional Information

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Febi 20498 2x Shock Absorbers (Pair)
ONLY
£112.35
Quantity:
Please enter your vehicle information above to check this fits your vehicle!
Placement on Vehicle Front Axle
Weight 4.7 kg
Function Shock Absorber
Shock Absorber Mounting Type Top eye, Bottom eye
Shock Absorber Type Oil Pressure
Pipe Diameter 66 mm. 59 mm
Mounting points diameter 16 mm
Piston conrod diameter 15 mm
Type Shock Absorber
Shock Absorber Design Telescopic Shock Absorber
Max. Length 802 mm
Min. Length 483 mm
Replaces 20546

Additional Information

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Febi 20190 2x Shock Absorbers (Pair)
ONLY
£112.35
Quantity:

Featured brands
NAPA
Borg & Beck
Febi
Gates
Bosch
Blue Print
Reviews

All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....


RS
R S
Sept 2023

A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......


MT
Mark T
Sept 2023

First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.


GR
Graham P
Sept 2023

Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.


DP
David P
Aug 2023

Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....


DB
Daniel B
Aug 2023