Important compatibility info
Weight | 9.51 kg |
Material | Grey Cast Iron |
Number of Wings | 9 |
Type | Water Pump, engine cooling |
Function | Water Pump, engine cooling |
Water pump impeller material | Grey Cast Iron |
Seal Material | Rubber |
Internal Thread Size | M10 x 1,5 |
Additional Information | with gaskets/seals |
for OE number | 906 200 60 01 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.645 kg |
Voltage | 24 V |
Number of Connectors / Ports | 5 |
Function | Wiper Motor |
Placement on Vehicle | Front |
Type | Wiper Motor |
Additional Information 2 | with cable |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Width | 62 mm |
Thickness | 121 mm |
Rod/Strut | Guide Rod |
Cone Size | 32 mm |
Pipe Diameter | 50 mm |
Length | 1596 mm |
Placement on Vehicle | Front Axle, Rear Axle |
External Thread Size | M27 x 1,5 |
Internal Thread Size | M30 x 1,5 RHT |
Function | Tie Rod |
Extra Description | ProKit |
Type | Tie Rod |
Weight | 13.45 kg |
Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Water Pump, engine cooling |
Additional Information 2 | switchable water pump |
Type | Water Pump, engine cooling |
Number of Wings | 9 |
Water pump impeller material | Metal |
Seal Material | Rubber/Metal |
Additional Information | with gasket/seal |
Weight | 1.52 kg |
Number of grooves | 6 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Cylinder Head Cover |
Extra Description | febi Plus |
Additional Information | with gasket/seal |
Heating / Cooling | with jiggle pin |
Type | Cylinder Head Cover |
Weight | 1.63 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Left |
Material | Rubber/Metal |
Bearing/Mounting Type | Hydro Mount |
Function | Mounting, engine |
Weight | 1.8 kg |
Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.49 kg |
Function | Bush, kingpin |
Extra Description | ProKit |
Type | Bush, kingpin |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Ball Joint (38490)
- 1x Febi Ball Joint (28356)
- 1x Febi Mounting, control/trailing arm (44400)
- 2x Febi Mounting, control/trailing arm (26933)
- 1x Febi Screw (44467)
- 1x Febi Screw (44469)
- 2x Febi Nut (44470)
Important compatibility info
Brake Disc Thickness | 30 mm |
Placement on Vehicle | Front Axle |
Outer diameter | 325 mm |
Centering Diameter | 63.5 mm |
Minimum thickness | 28 mm |
Bolt Hole Circle Diameter | 108 mm |
Surface | Coated |
Number of mounting bores | 1 |
Machining | High-carbon |
Function | Brake Disc |
Rotor Style | Internally Vented |
Rim Hole Number | 5 -Hole |
Weight | 10.35 kg |
Thickness | 48.2 mm |
Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Hole Spacing | 115 mm |
Weight | 10.8 kg |
Placement on Vehicle | Rear Axle |
Length | 666 mm |
Steering arm type | Trailing Arm |
Pipe Diameter | 48 mm |
Mounting points diameter | 17 mm |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.658 kg |
Length | 1150 mm |
Width | 387 mm |
Material | Rubber |
Thickness | 18 mm |
Function | Gasket, oil sump |
Type | Gasket, oil sump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Right |
Additional Information 2 | with nut |
Thread Size | M24x1,5 |
External Teeth, Wheel Side | 27 |
Weight | 10.160 kg |
External Teeth, Diff.Side | 37 |
Number of Teeth, ABS ring | 48 |
Min. Length | 954 mm |
ABS Ring Diameter | 99 mm |
Wheel Sided Joint Diameter | 98 mm |
Transmission-side joint diameter | 88.8 mm |
Type | Drive Shaft |
Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front and Rear, Left |
Length | 266 mm |
Number of Teeth | 48 |
Paired article numbers | 188116 |
Weight | 2.400 kg |
Type | Brake Shaft, drum brake |
Function | Brake Shaft, drum brake |
Screw length below head | 230 mm |
Brake Shaft Cam | Z-cam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front and Rear, Right |
Length | 266 mm |
Number of Teeth | 48 |
Paired article numbers | 188115 |
Weight | 2.400 kg |
Type | Brake Shaft, drum brake |
Function | Brake Shaft, drum brake |
Screw length below head | 230 mm |
Brake Shaft Cam | Z-cam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Oil Pump |
Weight | 0.73 kg |
Type | Oil Pump |
Pulleys | with belt pulley |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle |
Length | 984 mm |
Additional Information | with nuts |
Rod/Strut | Push Rod |
Weight | 12.000 kg |
Cone Size | 32 mm |
Adjustable | Adjustable on one side |
Type | Centre Rod Assembly |
Function | Centre Rod Assembly |
Extra Description | ProKit |
External Thread Size | M27 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Mounting, engine |
Function | Mounting, engine |
Weight | 1.768 kg |
Bearing/Mounting Type | Hydro Mount |
Placement on Vehicle | Right, Front |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Right |
Thread Size | M24x1,5 |
External Teeth, Wheel Side | 29 |
Weight | 0.001 kg |
External Teeth, Diff.Side | 29 |
Min. Length | 998 mm |
ABS Ring Diameter | 90 mm |
Wheel Sided Joint Diameter | 103.5 mm |
Transmission-side joint diameter | 92 mm |
Type | Drive Shaft |
Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Mounting, engine |
Type | Mounting, engine |
Weight | 1.516 kg |
Placement on Vehicle | Right |
Bearing/Mounting Type | electrically adjustable hydro mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Centering Diameter | 75 mm |
Surface | Coated |
Number of mounting bores | 1 |
Weight | 12.0 kg |
Rotor Style | Internally Vented |
Machining | High-carbon |
Function | Brake Disc |
Placement on Vehicle | Front Axle |
Outer diameter | 348 mm |
Thickness | 66 mm |
Brake Disc Thickness | 30 mm |
Minimum thickness | 28.4 mm |
Bolt Hole Circle Diameter | 120 mm |
Type | Brake Disc Rotor |
Rim Hole Number | 5 -Hole |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with piston |
Weight | 5.6 kg |
External Thread Size | M22 x 1,5, M10 x 1,5, M16 x 2 |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Outer diameter | 228 mm. 170 mm |
Thickness | 137 mm. 610 mm |
Type | Bellow, air suspension |
Function | Bellow, air suspension |
Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023