Proud to be a UK-based company
Contact us
Important compatibility info
| Additional Information | with seal rings |
| Material | Grey Cast Iron |
| Weight | 1.040 kg |
| Number of Wings | 6 |
| Type | Water Pump, engine cooling |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Metal |
| Seal Material | Metal, Rubber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.70
Important compatibility info
| Number of Teeth | 145 |
| Function | Water Pump & Timing Belt Kit |
| Width | 25 mm |
| Weight | 2.021 kg |
| Type | Water Pump & Timing Belt Kit |
| Additional Information | with fastening/mounting material |
| Water pump impeller material | Metal |
| Additional Information 2 | non-switchable water pump |
| Belts | with rounded tooth profile |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Water Pump, engine cooling (103078)
- 1x Febi Timing Belt Kit (100790)
£110.70
Important compatibility info
| Weight | 5.9 kg |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Outer diameter | 228 mm |
| Thickness | 210 mm |
| Function | Bellow, air suspension |
| Additional Information | with piston |
| External Thread Size | M16 x 1,5, M10 x 1,5 |
| Type | Bellow, air suspension |
| Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.65
Important compatibility info
| Inner diameter 2 | 70 mm |
| Function | Wheel Bearing Kit |
| Bearing Type | Tapered Roller Bearing |
| Width 2 | 43 mm |
| Outer diameter 2 | 112.7 mm. 130 mm |
| Width 1 | 30.4 mm |
| Weight | 4.19 kg |
| Inner diameter 1 | 57 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Type | Wheel Bearing Kit |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Wheel Bearing (11603)
- 1x Febi Wheel Bearing (09876)
- 1x Febi Shaft Seal, wheel hub (07061)
- 1x Febi Seal Ring, wheel hub (11577)
- 2x Febi Seal Ring (11599)
- 1x Febi Circlip (11600)
- 1x Febi Cover Plate, dust-cover wheel bearing (11601)
- 1x Febi Washer (11602)
£110.62
Important compatibility info
| Outer diameter | 50 mm |
| Length | 399 mm. 631 mm |
| Weight | 1.456 kg |
| Placement on Vehicle | Front Axle |
| Function | Shock Absorber, steering |
| Type | Shock Absorber, steering |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.62
Important compatibility info
| Pipe Diameter | 60 mm |
| Adjustable | Adjustable on one side |
| Type | Centre Rod Assembly |
| Function | Centre Rod Assembly |
| Extra Description | ProKit |
| Placement on Vehicle | Front Axle, outer |
| Length | 1052 mm |
| Additional Information 2 | with crown nut |
| Steering arm type | Control Arm |
| Rod/Strut | Push Rod |
| Weight | 11.794 kg |
| Cone Size | 30 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.62
Important compatibility info
| Type | Control/Trailing Arm, wheel suspension |
| Weight | 1.958 kg |
| Cone Size | 18 mm |
| Paired article numbers | 179577 |
| Additional Information | with rubber mounts |
| Additional Information 2 | with ball joint |
| Function | Control/Trailing Arm, wheel suspension |
| Material | Aluminium |
| Steering arm type | Triangular Control Arm (CV) |
| Placement on Vehicle | Front Axle, Upper Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.62
Important compatibility info
| Function | Drive Shaft |
| Type | Drive Shaft |
| External Teeth, Wheel Side | 30 |
| Bore Diameter | 10.5 mm |
| Bolt Hole Circle Diameter | 85.95 mm |
| Thread Size | M27x1,5 |
| Additional Information 2 | with nut |
| Placement on Vehicle | Rear Axle |
| Transmission-side joint diameter | 99.9 mm |
| Wheel Sided Joint Diameter | 94 mm |
| Min. Length | 661 mm |
| Number of mounting bores | 6 |
| Weight | 6.846 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.62
Important compatibility info
| Weight | 11.0 kg |
| Function | Centre Rod Assembly |
| Width | 40 mm |
| Thickness | 116 mm |
| Rod/Strut | Push Rod |
| Thread Type | with right-hand thread |
| Internal Thread Size | M30 x 1,5 |
| Pipe Diameter | 60 mm |
| Cone Size | 30 mm |
| Length | 825 mm |
| Placement on Vehicle | Front Axle |
| External Thread Size | M24 x 1,5 |
| Extra Description | ProKit |
| Type | Centre Rod Assembly |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.62
Important compatibility info
| Weight | 5.985 kg |
| Mounting points diameter | 10.5 mm |
| Function | Hydraulic Pump, steering |
| Pressure | 135 bar |
| Operating Mode | Hydraulic |
| Rotation Direction | Anticlockwise rotation |
| Number of Connectors / Ports | 2 |
| Internal Thread Size | M16 x 1,5, M26 x 1,5 |
| Type | Hydraulic Pump, steering |
| Hole Spacing | 120 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.62
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023