Proud to be a UK-based company
Contact us
Important compatibility info
| Thickness | 121 mm |
| Rod/Strut | Push Rod |
| Cone Size | 30 mm |
| Pipe Diameter | 62 mm |
| Weight | 11.3 kg |
| Placement on Vehicle | Front Axle |
| Length | 845 mm |
| Width | 68 mm |
| External Thread Size | M24 x 1,5 |
| Internal Thread Size | M38 x 1,5 RHT |
| Function | Centre Rod Assembly |
| Extra Description | ProKit |
| Type | Centre Rod Assembly |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£115.57
Important compatibility info
| Placement on Vehicle | Rear Axle Left |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated ABS sensor |
| Width | 60 mm |
| Inner diameter | 26 mm |
| Outer diameter | 72 mm |
| Paired article numbers | 179849 |
| Weight | 2.972 kg |
| Bearing Type | Angular Ball Bearing |
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£115.57
Important compatibility info
| Placement on Vehicle | Front Axle Left, Lower |
| Material | Cast Steel |
| Additional Information 2 | with rubber mount, with ball joint |
| Steering arm type | Control Arm |
| Paired article numbers | 180935 |
| Weight | 6.275 kg |
| Cone Size | 17 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£115.57
Important compatibility info
| Max. Length | 272 mm |
| Min. Length | 222 mm |
| Pipe Diameter | 45 mm |
| Piston conrod diameter | 12 mm |
| Type | Shock Absorber, driver cab suspension |
| Function | Shock Absorber, driver cab suspension |
| External Thread Size | M12 x 1,5 |
| Weight | 4.5 kg |
| Shock Absorber Mounting Type | Top pin, Bottom Yoke |
| Placement on Vehicle | Rear |
| Operating Mode | Mechanical |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£115.57
Important compatibility info
| Voltage | 12 V |
| Number of Ribs | 6 |
| Pulleys | with belt pulley |
| Alternator Charge Current | 70 A |
| Belt Pulley Diameter | 62 mm |
| Weight | 6.5 kg |
| Current Strength | 70 A |
| Type | Alternator |
| Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£115.57
Important compatibility info
| Weight | 2.7 kg |
| Operating Mode | Manual |
| Number of Connectors / Ports | 2 |
| Type | Tilt Pump, driver cab |
| Function | Tilt Pump, driver cab |
| Pressure side external thread size | M12 x 1,5 |
| Suction side external thread size | M12 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£115.57
Important compatibility info
| Water pump impeller material | Grey Cast Iron |
| Material | Grey Cast Iron |
| Number of Wings | 12 |
| Type | Water Pump, engine cooling |
| Function | Water Pump, engine cooling |
| Additional Information | with gaskets/seals |
| Weight | 7.075 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£115.57
Important compatibility info
| Weight | 6.450 kg |
| Rod/Strut | Push Rod |
| Pipe Diameter | 46 mm |
| Type | Centre Rod Assembly |
| Function | Centre Rod Assembly |
| Extra Description | ProKit |
| Additional Information | with nuts |
| Cone Size | 28.6 mm |
| Length | 718 mm |
| External Thread Size | M20 x 1,5 |
| Placement on Vehicle | Front Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£115.57
Important compatibility info
| for OE number | 1644 886 |
| Weight | 4.375 kg |
| Type | Fan Wheel, engine cooling |
| Function | Fan Wheel, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£115.57
Important compatibility info
| Weight | 5.89 kg |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Width | 128 mm |
| Outer diameter | 128 mm |
| Inner diameter | 30 mm |
| Bolt Hole Circle Diameter | 104 mm |
| Bearing Type | Angular Ball Bearing |
| Function | Wheel Bearing Kit |
| Type | Wheel Bearing Kit |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with ABS sensor ring |
| for OE number | 3748.A3 S1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£115.57
Important compatibility info
| Voltage | 12 V |
| Number of Ribs | 5 |
| Pulleys | with belt pulley |
| Alternator Charge Current | 85 A |
| Belt Pulley Diameter | 48 mm |
| Weight | 4.6 kg |
| Type | Alternator |
| Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£115.57
Important compatibility info
| Additional Information | with lids |
| Fill quantity | 11.4 l |
| Weight | 2.743 kg |
| Length | 590 mm |
| Width | 230 mm |
| Thickness | 150 mm |
| Type | Expansion Tank, coolant |
| Function | Expansion Tank, coolant |
| Extra Description | ProKit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£115.57
Important compatibility info
| Function | Water Pump, engine cooling |
| Additional Information 2 | switchable water pump |
| Type | Water Pump, engine cooling |
| Number of Wings | 9 |
| Water pump impeller material | Metal |
| Seal Material | Rubber/Metal |
| Additional Information | with gasket/seal |
| Weight | 1.52 kg |
| Number of grooves | 6 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£115.56
Important compatibility info
| Function | Cylinder Head Cover |
| Extra Description | febi Plus |
| Additional Information | with gasket/seal |
| Heating / Cooling | with jiggle pin |
| Type | Cylinder Head Cover |
| Weight | 1.63 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£115.55
Important compatibility info
| Placement on Vehicle | Left |
| Material | Rubber/Metal |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Weight | 1.8 kg |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£115.53
Important compatibility info
| Weight | 2.49 kg |
| Function | Bush, kingpin |
| Extra Description | ProKit |
| Type | Bush, kingpin |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Ball Joint (38490)
- 1x Febi Ball Joint (28356)
- 1x Febi Mounting, control/trailing arm (44400)
- 2x Febi Mounting, control/trailing arm (26933)
- 1x Febi Screw (44467)
- 1x Febi Screw (44469)
- 2x Febi Nut (44470)
£115.53
Important compatibility info
| Weight | 3.8 kg |
| Placement on Vehicle | Rear Axle |
| Width | 136 mm |
| Outer diameter | 81 mm |
| Inner diameter | 27 mm |
| Function | Wheel Bearing Kit |
| Sealing lip material | NBR (nitrile butadiene rubber) |
| Bearing Type | Angular Ball Bearing |
| Type | Wheel Bearing Kit |
| Additional Information | with fastening/mounting material |
| Additional Information 2 | Wheel Bearing integrated into wheel hub |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£115.53
Important compatibility info
| External Thread Size | M16 x 1,5 |
| Weight | 5.63 kg |
| Placement on Vehicle | Front Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top pin, Bottom Pin |
| Max. Length | 526 mm |
| Min. Length | 325 mm |
| Pipe Diameter | 76 mm. 63 mm |
| Piston conrod diameter | 20 mm |
| Function | Shock Absorber |
| Replaces | 20032 |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£115.47
Important compatibility info
| Placement on Vehicle | Right Rear |
| Additional Information | with adjuster |
| Paired article numbers | 197192 |
| Number of Connectors / Ports | 6 |
| Weight | 1.0 kg |
| Type | Door Lock |
| Function | Door Lock |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£115.46
Important compatibility info
| Brake Disc Thickness | 30 mm |
| Placement on Vehicle | Front Axle |
| Outer diameter | 325 mm |
| Centering Diameter | 63.5 mm |
| Minimum thickness | 28 mm |
| Bolt Hole Circle Diameter | 108 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Machining | High-carbon |
| Function | Brake Disc |
| Rotor Style | Internally Vented |
| Rim Hole Number | 5 -Hole |
| Weight | 10.35 kg |
| Thickness | 48.2 mm |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£115.43
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023