Important compatibility info
Voltage | 12 V |
Number of Ribs | 6 |
Pulleys | with belt pulley |
Alternator Charge Current | 70 A |
Belt Pulley Diameter | 50 mm |
Weight | 5.0 kg |
Type | Alternator |
Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left |
Thread Size | M16x1,5 |
Paired article numbers | 188146 |
External Teeth, Wheel Side | 36 |
Weight | 5.073 kg |
External Teeth, Diff.Side | 28 |
Min. Length | 627 mm |
Wheel Sided Joint Diameter | 79 mm |
Transmission-side joint diameter | 75.5 mm |
Type | Drive Shaft |
Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M16 x 2, M10 x 1,5, M22 x 1,5 |
Outer diameter | 226 mm. 190 mm |
Thickness | 533 mm. 138 mm |
Function | Bellow, air suspension |
Weight | 6.430 kg |
Type | Bellow, air suspension |
Additional Information | with piston |
Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Water pump impeller material | Metal |
Width | 23 mm |
Number of Teeth | 142 |
Surface | Coated |
Type | Water Pump & Timing Belt Kit |
Function | Water Pump & Timing Belt Kit |
Weight | 1.925 kg |
for OE number | 30731727 S1 |
Belts | with rounded tooth profile |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt Kit (27559)
- 1x Febi Water Pump, engine cooling (22145)
Important compatibility info
Placement on Vehicle | Rear Axle |
Outer diameter | 286 mm. 239 mm |
Thickness | 192 mm. 483 mm |
External Thread Size | M22 x 1,5 |
Function | Bellow, air suspension |
Weight | 10.01 kg |
Type | Bellow, air suspension |
Additional Information | with piston |
Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | Requires special tools for mounting |
Chain Type | Simplex, with chain lock |
Number of Chain Links | 190 |
Timing Chain Size | G68HRF |
Function | Timing Chain |
Type | Timing Chain |
Weight | 1.040 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.16 kg |
Type | Valve Plate, air compressor |
Function | Valve Plate, air compressor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 12.2 kg |
Additional Information 2 | with ball joint |
Function | Control/Trailing Arm, wheel suspension |
Paired article numbers | 05040 |
Steering arm type | Control Arm |
Material | Sheet Steel |
Placement on Vehicle | Front Axle Left, Lower |
Type | Control/Trailing Arm, wheel suspension |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 3.86 kg |
Type | Starter |
Function | Starter |
Number of Teeth | 10 |
Rated Power | 2.2 kW |
Voltage | 12 V |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of mounting bores | 3 |
Type | Central Slave Cylinder, clutch |
Weight | 0.456 kg |
for OE number | 1 672 781 |
Function | Central Slave Cylinder, clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Lower |
Additional Information | with rubber-metal mounts |
Material | Sheet Steel |
Steering arm type | Control Arm |
Paired article numbers | 181829 |
Weight | 7.326 kg |
Cone Size | 25 mm |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Cone Size | 25 mm |
Weight | 7.326 kg |
Paired article numbers | 181823 |
Steering arm type | Control Arm |
Placement on Vehicle | Front Axle Right, Lower |
Additional Information | with rubber-metal mounts |
Material | Sheet Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Thickness | 124 mm. 519 mm |
Outer diameter | 258 mm. 229 mm |
Function | Bellow, air suspension |
Placement on Vehicle | Front Axle |
Weight | 8.0 kg |
Type | Bellow, air suspension |
External Thread Size | M16 x 1,5 |
Additional Information | with piston |
Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.116 kg |
Operating Mode | Electric |
Number of Connectors / Ports | 6 |
Function | Actuator, central locking system |
Extra Description | febi Plus |
Type | Actuator, central locking system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.043 kg |
Type | Valve Plate, air compressor |
Function | Valve Plate, air compressor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 9.1 kg |
Placement on Vehicle | Rear Axle |
Width | 72.1 mm |
Outer diameter | 310.7 mm |
Thickness | 88 mm |
Bolt Hole Circle Diameter | 112 mm |
Centering Diameter | 68 mm |
Number of mounting bores | 1 |
Max.skimmed drum measure | 269.5 mm |
Function | Brake Drum |
Rim Hole Number | 5 -Hole |
Inner Brake Drum Diameter | 268 mm |
Type | Brake Drum |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Distance of fastening bolts | 120 mm |
Weight | 8.1 kg |
Piston Rod Length | 15 mm |
Function | Spring-loaded Cylinder |
Internal Thread Size | M16 x 1,5 |
Brake Type | Disc Brake |
Type | Spring-loaded Cylinder |
Parameter | Typ 16 / 24 |
Stroke | 64 mm |
Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Wings | 7 |
Material | Grey Cast Iron |
Number of Teeth | 23 |
Function | Water Pump, engine cooling |
Water pump impeller material | Grey Cast Iron |
Weight | 4.17 kg |
Seal Material | Rubber |
Type | Water Pump, engine cooling |
Additional Information | with gaskets/seals |
Additional Information 2 | with gear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Left, Lower, Rear Axle Right |
Length | 612 mm |
Steering arm type | Trailing Arm |
Rod/Strut | Push Rod |
Pipe Diameter | 48 mm |
Mounting points diameter | 20 mm |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Hole Spacing | 130 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 11.5 kg |
Placement on Vehicle | Rear Axle |
Length | 575 mm |
Steering arm type | Trailing Arm, Triangular Control Arm (CV) |
Pipe Diameter | 50 mm |
Mounting points diameter | 17 mm |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Hole Spacing | 115 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023