Proud to be a UK-based company
Contact us
Important compatibility info
| Filter type | Activated Carbon Filter, High efficiency air filter (HEPA) |
| Height | 31 mm |
| Weight | 1.290 kg |
| Type | Filter, cabin air |
| Function | Filter, cabin air |
| Length | 1022 mm |
| Width | 318 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£112.53
Important compatibility info
| Material | Steel |
| Length | 743 mm |
| Number of Connectors / Ports | 6 |
| Weight | 12.9 kg |
| Capacity | 40 l |
| Operating Pressure | 15 bar |
| Type | Air Tank, compressed-air system |
| Function | Air Tank, compressed-air system |
| Internal Thread Size | M22 x 1,5 |
| Outer diameter | 276 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£112.52
Important compatibility info
| Length | 609 mm |
| Material | Steel |
| Outer diameter | 300 mm |
| Number of Connectors / Ports | 7 |
| Weight | 10.4 kg |
| Capacity | 36 l |
| Operating Pressure | 12.5 bar |
| Type | Air Tank, compressed-air system |
| Function | Air Tank, compressed-air system |
| Internal Thread Size | M22 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£112.52
Important compatibility info
| Housing Type | with housing |
| Number of Connectors / Ports | 4 |
| Resistor Type | Hot-film Sensor |
| Function | Mass Air Flow Sensor |
| Additional Information | with gasket/seal |
| Weight | 0.189 kg |
| Type | Mass Air Flow Sensor |
| for OE number | 1920.QV |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£112.49
Important compatibility info
| Function | Mounting, engine |
| Weight | 1.036 kg |
| Placement on Vehicle | Lower |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£112.46
Important compatibility info
| Function | Drive Shaft |
| External Teeth, Wheel Side | 28 |
| Min. Length | 622 mm |
| Type | Drive Shaft |
| Weight | 8.250 kg |
| Thread Size | M22x1,5 |
| Paired article numbers | 193517 |
| External Teeth, Diff.Side | 24 |
| Placement on Vehicle | Front Axle Left |
| Additional Information 2 | with nut |
| Additional Information | with axle nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£112.42
Important compatibility info
| External Thread Size | M14 x 1,5 |
| Placement on Vehicle | Front Axle Right |
| Material | Aluminium |
| Additional Information 2 | with ball joint |
| Steering arm type | Control Arm |
| Paired article numbers | 184883 |
| Weight | 3.602 kg |
| Cone Size | 16.5 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Cone Size 2 | 21 mm |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£112.42
Important compatibility info
| Weight | 3.32 kg |
| Placement on Vehicle | Front Axle |
| Length | 1035 mm |
| Function | Stabiliser Bar, suspension |
| Type | Stabiliser Bar, suspension |
| Additional Information 2 | without coupling rod |
| Stabiliser Diameter | 23.6 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Stabiliser Bar, suspension (45304)
- 4x Febi Fastening Bolt, stabiliser bar (45305)
£112.40
Important compatibility info
| Function | Shock Absorber |
| Type | Shock Absorber |
| Max. Length | 562 mm |
| Pipe Diameter | 73 mm. 63.5 mm |
| Mounting points diameter | 20 mm |
| Piston conrod diameter | 20 mm |
| Min. Length | 362 mm |
| Weight | 4.75 kg |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Shock Absorber Design | Telescopic Shock Absorber |
| Shock Absorber Type | Oil Pressure |
| Placement on Vehicle | Front Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£112.38
Important compatibility info
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 492 mm |
| Min. Length | 327 mm |
| Pipe Diameter | 74 mm. 66 mm |
| Mounting points diameter | 24 mm |
| Piston conrod diameter | 17 mm |
| Function | Shock Absorber |
| Replaces | 20001; 20327 |
| Weight | 4.68 kg |
| Type | Shock Absorber |
| Placement on Vehicle | Front Axle, Rear Axle |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£112.37
Important compatibility info
| Additional Information | with coolant level sensor |
| Material | Plastic |
| Additional Information 2 | with lid |
| Weight | 1.17 kg |
| Type | Expansion Tank, coolant |
| Function | Expansion Tank, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£112.37
Important compatibility info
| Placement on Vehicle | Left, Upper |
| Weight | 3.832 kg |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, manual transmission |
| Function | Mounting, manual transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£112.36
Important compatibility info
| Mounting points diameter | 20 mm |
| Piston conrod diameter | 20 mm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Function | Shock Absorber |
| Max. Length | 478 mm |
| Min. Length | 324 mm |
| Weight | 5.1 kg |
| Pipe Diameter | 80 mm. 70 mm |
| Type | Shock Absorber |
| Replaces | 20272 |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£112.35
Important compatibility info
| Weight | 1.1 kg |
| Width of castor bearing surface | 26.5 mm |
| Outer diameter | 65 mm |
| Operating Mode | Automatic |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Metal |
| Type | Belt Tensioner, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£112.31
Important compatibility info
| Function | Steering Column Switch |
| Type | Steering Column Switch |
| Combi Switch Function | with wipe-wash function, with rear wipe-wash function, with radio control function |
| Weight | 0.253 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£112.30
Important compatibility info
| Weight | 0.12 kg |
| Type | Clock Spring, airbag |
| Function | Clock Spring, airbag |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£112.30
Important compatibility info
| Function | Hydraulic Pump, steering |
| Weight | 1.57 kg |
| Type | Hydraulic Pump, steering |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£112.29
Important compatibility info
| Function | Bellow, air suspension |
| Placement on Vehicle | Rear Axle |
| External Thread Size | 1/4 " 18 NPT, 1/2 " 13 UNC, 3/8 " 16 UNC |
| Outer diameter | 160 mm |
| Thickness | 352 mm. 165 mm |
| Weight | 2.58 kg |
| Type | Bellow, air suspension |
| Rolling piston material | Plastic |
| Additional Information | with piston |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£112.27
Important compatibility info
| Alternator Charge Current | 70 A |
| Number of Ribs | 3 |
| Voltage | 12 V |
| Pulleys | with belt pulley |
| Belt Pulley Diameter | 60 mm |
| Weight | 5.0 kg |
| Type | Alternator |
| Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£112.23
Important compatibility info
| Weight | 0.2 kg |
| Type | Oil Line, charger |
| Forward- /Backflow | Supply Line |
| Function | Oil Line, charger |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£112.14
Important compatibility info
| Weight | 0.760 kg |
| for OE number | 81.27203.6020 |
| Number of Connectors / Ports | 2. 4 |
| Type | Sender Unit, fuel tank |
| Function | Sender Unit, fuel tank |
| Screw length below head | 610 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£112.13
Important compatibility info
| External Thread Size | M14 x 1,5 |
| Placement on Vehicle | Rear Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top pin, Bottom Pin |
| Max. Length | 600 mm |
| Min. Length | 364 mm |
| Pipe Diameter | 63.5 mm. 54 mm |
| Piston conrod diameter | 16 mm |
| Function | Shock Absorber |
| Weight | 3.64 kg |
| Replaces | 20015 |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£112.12
Important compatibility info
| Weight | 5.27 kg |
| External Thread Size | M22 x 1,5, M10 x 1,5, M16 x 2 |
| Thickness | 485 mm. 152 mm |
| Function | Bellow, air suspension |
| Outer diameter | 228 mm. 170 mm |
| Placement on Vehicle | non-steered trailing axle |
| Extra Description | febi Plus |
| Type | Bellow, air suspension |
| Additional Information | with piston |
| Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£112.10
Important compatibility info
| Function | Mounting, manual transmission |
| Type | Mounting, manual transmission |
| Bearing/Mounting Type | Hydro Mount |
| Weight | 2.899 kg |
| Placement on Vehicle | Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£112.10
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Thread Size | M14x1,5 |
| Bolt Hole Circle Diameter | 94 mm |
| Bore Diameter | 10.2 mm |
| External Teeth, Wheel Side | 33 |
| Weight | 8.803 kg |
| Number of mounting bores | 6 |
| Min. Length | 633 mm |
| ABS Ring Diameter | 81 mm |
| Wheel Sided Joint Diameter | 88 mm |
| Transmission-side joint diameter | 108 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£112.04
Important compatibility info
| Function | Water Pump & Timing Belt Kit |
| Width | 24 mm |
| Number of Teeth | 166 |
| Belts | with trapezoidal tooth profile |
| Weight | 1.378 kg |
| Type | Water Pump & Timing Belt Kit |
| Units / Pulleys | incl. tensioner pulley, incl. deflection pulley |
| Water pump impeller material | Plastic |
| Belt Material | HNBR (hydrogenated nitrile butadiene rubber) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt (10981)
- 1x Febi Tensioner Pulley, timing belt (17767)
- 1x Febi Deflection Pulley/Guide Pulley, timing belt (10649)
- 1x Febi Water Pump, engine cooling (34519)
£112.03
Important compatibility info
| Weight | 2.92 kg |
| Material | Aluminium |
| Number of Wings | 8 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Plastic |
| Seal Material | Rubber/Metal |
| Additional Information | with gasket/seal |
| Type | Water Pump, engine cooling |
| for OE number | 51.06500.6694 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£112.02
Important compatibility info
| Weight | 2.300 kg |
| Width | 19 mm |
| Number of Teeth | 84 |
| Function | Timing Belt Kit |
| Additional Information 2 | without tensioner element |
| Type | Timing Belt Kit |
| for OE number | 1 562 244 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£112.01
Important compatibility info
| Weight | 4.239 kg |
| Type | Mounting Bracket, shock absorber mounting (driver cab) |
| Function | Mounting Bracket, shock absorber mounting (driver cab) |
| Placement on Vehicle | both sides |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£111.95
Important compatibility info
| Placement on Vehicle | Right Front |
| Additional Information | with electric motor |
| Operating Mode | Electric |
| Paired article numbers | 178868 |
| Number of Connectors / Ports | 2 |
| Weight | 1.6 kg |
| Type | Window Regulator |
| Function | Window Regulator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£111.86
Important compatibility info
| Rotor Style | Slotted/Internally Vented |
| Rim Hole Number | 5 -Hole |
| Weight | 9.61 kg |
| Placement on Vehicle | Front Axle |
| Outer diameter | 340 mm |
| Thickness | 63 mm |
| Brake Disc Thickness | 28 mm |
| Minimum thickness | 26 mm |
| Bolt Hole Circle Diameter | 114.3 mm |
| Centering Diameter | 68 mm |
| Surface | Coated |
| Number of mounting bores | 2 |
| Machining | High-carbon |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£111.73
Important compatibility info
| Internal Thread Size | M22 x 1,5 |
| Brake Type | Drum Brake |
| Additional Information | with fastening/mounting material |
| Placement on Vehicle | Front |
| Parameter | Typ 24/24 |
| Stroke | 57 mm |
| Type | Spring-loaded Cylinder |
| Bore Diameter | 14 mm |
| Weight | 8.5 kg |
| Distance of fastening bolts | 120 mm |
| Piston Rod Length | 187 mm |
| Function | Spring-loaded Cylinder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£111.71
Important compatibility info
| Outer diameter | 190 mm. 155 mm |
| Function | Bellow, air suspension |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Thickness | 414 mm. 186 mm |
| Weight | 6.3 kg |
| External Thread Size | M16 x 1,5, M24 x 1,5, M20 x 1,5 |
| Type | Bellow, air suspension |
| Additional Information | with piston |
| Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£111.69
Important compatibility info
| Rim Hole Number | 6 -Hole |
| Rotor Style | Solid |
| Weight | 15.2 kg |
| Additional Information 2 | with wheel studs |
| Placement on Vehicle | Front Axle |
| Outer diameter | 290 mm |
| Thickness | 110 mm |
| Brake Disc Thickness | 22 mm |
| Minimum thickness | 19 mm |
| Bolt Hole Circle Diameter | 170 mm |
| Centering Diameter | 64 mm |
| Surface | Coated |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£111.65
Important compatibility info
| Function | Drive Shaft |
| Type | Drive Shaft |
| External Teeth, Wheel Side | 30 |
| Bore Diameter | 10.5 mm |
| Bolt Hole Circle Diameter | 85.95 mm |
| Thread Size | M27x1,5 |
| Additional Information 2 | with nut |
| Placement on Vehicle | Rear Axle |
| Transmission-side joint diameter | 99.9 mm |
| Wheel Sided Joint Diameter | 94 mm |
| Min. Length | 661 mm |
| Number of mounting bores | 6 |
| Weight | 6.846 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£111.62
Important compatibility info
| Weight | 10.985 kg |
| Placement on Vehicle | Front Axle |
| Length | 1477 mm |
| Outer diameter | 50 mm |
| Thread Length | 25 mm |
| Thread Type | with left-hand thread |
| Cone Size | 30 mm |
| Pipe Diameter | 50 mm |
| Function | Tie Rod |
| Extra Description | ProKit |
| Internal Thread Size | M30 x 1,5 LHT |
| External Thread Size | M24 x 1,5 |
| Type | Tie Rod |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£111.61
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Paired article numbers | 05023 |
| Steering arm type | Control Arm |
| Material | Sheet Steel |
| Placement on Vehicle | Front Axle Right, Lower |
| Weight | 5.277 kg |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£111.61
Important compatibility info
| Pipe Diameter | 48 mm |
| Type | Tie Rod |
| Extra Description | ProKit |
| Rod/Strut | Push Rod |
| Additional Information 2 | with crown nut |
| Placement on Vehicle | Front Axle |
| Cone Size | 30 mm |
| External Thread Size | M24 x 1,5 |
| Weight | 11.6 kg |
| Internal Thread Size | M30 x 1,5 LHT, M30 x 1,5 RHT |
| Function | Tie Rod |
| Length | 1675 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£111.61
Important compatibility info
| Additional Information 2 | with bearing |
| Outer diameter 1 | 52 mm |
| Outer diameter 2 | 53 mm |
| Type | Repair Kit, kingpin |
| Additional Information | with Thrust Bearing |
| Length | 235 mm |
| Weight | 6.029 kg |
| Function | Repair Kit, kingpin |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Kingpin (18995)
- 1x Febi Bush, steering knuckle (18990)
- 1x Febi Seal Ring, steering knuckle (18994)
- 2x Febi Seal Ring, steering knuckle (18992)
- 2x Febi Lock Ring, steering knuckle (19029)
- 2x Febi Lock Ring, steering knuckle (19224)
- 2x Febi Circlip (04687)
- 1x Febi Spacer, kingpin (19250)
- 1x Febi Spacer, kingpin (19251)
- 1x Febi Spacer, kingpin (19252)
- 1x Febi Spacer, kingpin (19253)
- 1x Febi Spacer, kingpin (19254)
- 1x Febi Spacer, kingpin (19255)
- 1x Febi Spacer, kingpin (170028)
- 1x Febi Spacer, kingpin (170029)
- 1x Febi Spacer, kingpin (170030)
- 1x Febi Bush, steering knuckle (172905)
£111.61
Important compatibility info
| Outer diameter | 123 mm |
| Weight | 0.611 kg |
| Inner diameter | 115 mm |
| Function | Charge Air Hose |
| Additional Information 2 | with clamps |
| Extra Description | ProKit |
| Type | Charge Air Hose |
| Hose Length | 210 mm |
| Wall Thickness | 4 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Charge Air Hose (26516)
- 2x Febi Fastening Clamp, charge air hose (39030)
£111.61
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Thread Size | M16x1,5 |
| External Teeth, Wheel Side | 36 |
| Weight | 6.220 kg |
| Min. Length | 473 mm |
| Wheel Sided Joint Diameter | 97.9 mm |
| Transmission-side joint diameter | 85 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£111.61
Important compatibility info
| Function | Air Dryer, compressed-air system |
| Weight | 3.8 kg |
| Type | Air Dryer, compressed-air system |
| Voltage | 24 V |
| Additional Information 2 | with integrated oil separator, with dryer |
| Rated Power | 100 W |
| Cut-off Pressure | 12 bar |
| Operating pressure to | 13 bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£111.61
Important compatibility info
| for OE number | 13506-26020 |
| Weight | 0.553 kg |
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 112 |
| Type | Timing Chain |
| Function | Timing Chain |
| Replaces | 182190 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£111.61
Important compatibility info
| Type | Cable Pull, manual transmission |
| Function | Cable Pull, manual transmission |
| Inner length 2 | 785 mm |
| Weight | 0.848 kg |
| Inner length 1 | 792 mm |
| Outer length 1 | 1015 mm |
| Outer length 2 | 1020 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£111.61
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 985 mm |
| Additional Information 2 | with crown nut |
| Rod/Strut | Push Rod |
| Weight | 10.600 kg |
| Cone Size | 30 mm |
| Adjustable | adjustable |
| Type | Centre Rod Assembly |
| Function | Centre Rod Assembly |
| Extra Description | ProKit |
| External Thread Size | M24 x 1,5 |
| Internal Thread Size | M30 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£111.61
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Length | 750 mm |
| Steering arm type | Trailing Arm |
| Pipe Diameter | 40 mm |
| Mounting points diameter | 17 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Weight | 7.6 kg |
| Hole Spacing | 100 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£111.61
Important compatibility info
| Length | 172 mm |
| Outer diameter | 32 mm |
| Function | Repair Kit, kingpin |
| Weight | 3.3 kg |
| Extra Description | ProKit |
| Type | Repair Kit, kingpin |
| Additional Information 2 | with slide bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Kingpin (29731)
- 2x Febi Bush, steering knuckle (29732)
- 2x Febi Bush, kingpin (29733)
- 2x Febi Bush, kingpin (29734)
- 4x Febi Seal Ring, steering knuckle (29735)
- 2x Febi Seal Ring, steering knuckle (29736)
- 2x Febi Seal Ring, steering knuckle (29737)
- 2x Febi Spacer, kingpin (29740)
- 2x Febi Spacer, kingpin (29741)
- 2x Febi Spacer, kingpin (29742)
- 2x Febi Spacer, kingpin (29743)
£111.61
Important compatibility info
| Placement on Vehicle | Intake Side |
| Weight | 1.834 kg |
| Type | Camshaft |
| Function | Camshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£111.61
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Material | Aluminium |
| Additional Information 2 | with ball joint |
| Steering arm type | Control Arm |
| Paired article numbers | 184888 |
| Weight | 3.602 kg |
| Function | Control/Trailing Arm, wheel suspension |
| Cone Size 2 | 21 mm |
| External Thread Size | M14 x 1,5 |
| Cone Size | 16.6 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£111.61
Important compatibility info
| Type | Wiper Linkage |
| Function | Wiper Linkage |
| Extra Description | febi Plus |
| Weight | 4.07 kg |
| Additional Information | without electric motor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£111.61
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023