Proud to be a UK-based company
Contact us
Important compatibility info
| Weight | 6.8 kg |
| Placement on Vehicle | Front Axle, Rear Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 704 mm |
| Min. Length | 442 mm |
| Pipe Diameter | 80 mm. 70 mm |
| Mounting points diameter | 20 mm |
| Piston conrod diameter | 20 mm |
| Type | Shock Absorber |
| Function | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
| Replaces | 20045 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£107.58
Important compatibility info
| Placement on Vehicle | non-steered leading axle |
| Outer diameter | 228 mm. 197 mm |
| Thickness | 165 mm. 448 mm |
| Function | Bellow, air suspension |
| Additional Information | with piston rod, with piston |
| Weight | 6.93 kg |
| External Thread Size | M16 x 1,5, M24 x 1,5, M10 x 1,5 |
| Type | Bellow, air suspension |
| Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£107.56
Important compatibility info
| Piston conrod diameter | 16 mm |
| Function | Shock Absorber |
| Pipe Diameter | 63.5 mm. 54 mm |
| Mounting points diameter | 20 mm |
| Placement on Vehicle | Front Axle |
| Shock Absorber Mounting Type | Top pin, Bottom eye |
| Shock Absorber Type | Oil Pressure |
| Max. Length | 865 mm |
| Min. Length | 495 mm |
| Weight | 4.22 kg |
| External Thread Size | M14 x 1,5 |
| Replaces | 20145 |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£107.53
Important compatibility info
| Weight | 0.116 kg |
| Operating Mode | Electric |
| Number of Connectors / Ports | 6 |
| Function | Actuator, central locking system |
| Extra Description | febi Plus |
| Type | Actuator, central locking system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£107.52
Important compatibility info
| Weight | 11.592 kg |
| Rotor Style | Internally Vented |
| Rim Hole Number | 5 -Hole |
| Placement on Vehicle | Front Axle |
| Outer diameter | 334 mm |
| Brake Disc Thickness | 32 mm |
| Minimum thickness | 30.4 mm |
| Bolt Hole Circle Diameter | 120 mm |
| Centering Diameter | 79 mm |
| Surface | Coated |
| Number of mounting bores | 2 |
| Function | Brake Disc |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£107.50
Important compatibility info
| Weight | 1.043 kg |
| Type | Valve Plate, air compressor |
| Function | Valve Plate, air compressor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£107.48
Important compatibility info
| Weight | 0.16 kg |
| Number of Connectors / Ports | 4 |
| Inner diameter | 63 mm |
| Housing Type | with housing |
| Function | Mass Air Flow Sensor |
| Additional Information 2 | Control Unit/Software must be trained/updated |
| Outer diameter | 70 mm |
| Material | Plastic |
| Type | Mass Air Flow Sensor |
| Resistor Type | Hot-wire Sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£107.39
Important compatibility info
| Number of Wings | 7 |
| Material | Grey Cast Iron |
| Number of Teeth | 23 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Grey Cast Iron |
| Weight | 4.17 kg |
| Seal Material | Rubber |
| Type | Water Pump, engine cooling |
| Additional Information | with gaskets/seals |
| Additional Information 2 | with gear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£107.36
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Additional Information 2 | with nut |
| Thread Size | M24x1,5 |
| External Teeth, Wheel Side | 29 |
| Weight | 8.522 kg |
| External Teeth, Diff.Side | 29 |
| Min. Length | 637 mm |
| ABS Ring Diameter | 90 mm |
| Wheel Sided Joint Diameter | 103 mm |
| Transmission-side joint diameter | 92 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£107.34
Important compatibility info
| Weight | 11.5 kg |
| Placement on Vehicle | Rear Axle |
| Length | 575 mm |
| Steering arm type | Trailing Arm, Triangular Control Arm (CV) |
| Pipe Diameter | 50 mm |
| Mounting points diameter | 17 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Hole Spacing | 115 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£107.29
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023