Proud to be a UK-based company
Contact us
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Outer diameter | 228 mm. 265 mm |
| Thickness | 165 mm. 550 mm |
| Type | Bellow, air suspension |
| Function | Bellow, air suspension |
| Weight | 6.08 kg |
| External Thread Size | M22 x 1,5, M10 x 1,5, M16 x 2 |
| Additional Information | with piston |
| Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£107.78
Important compatibility info
| Suction side external thread size | M12 x 1,5 |
| Number of Connectors / Ports | 3 |
| Operating Mode | Manual |
| Pressure side external thread size | M14 x 1,5 |
| Function | Tilt Pump, driver cab |
| Type | Tilt Pump, driver cab |
| Weight | 2.4 kg |
| Hole Spacing | 70 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£107.76
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Additional Information 2 | with nut |
| Thread Size | M24x2,0 |
| External Teeth, Wheel Side | 28 |
| Weight | 0.001 kg |
| External Teeth, Diff.Side | 36 |
| Min. Length | 1057 mm |
| ABS Ring Diameter | 105 mm |
| Transmission-side joint diameter | 91 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£107.73
Important compatibility info
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Weight | 1.200 kg |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£107.72
Important compatibility info
| Weight | 3.05 kg |
| Placement on Vehicle | Lower Front Axle, Rear |
| Material | Cast Steel |
| Steering arm type | Control Arm |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£107.66
Important compatibility info
| Weight | 1.458 kg |
| Chain Type | Silent Chain, Closed chain |
| Number of Chain Links | 116 |
| Function | Timing Chain Kit |
| Type | Timing Chain Kit |
| Timing Chain Size | Z53R |
| Extra Description | Standard Medium Kit |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Sprocket, crankshaft (38382)
- 1x Febi Pulley Bolt (32025)
- 1x Febi Gear/Sprocket, camshaft (38381)
- 1x Febi Bolt, camshaft gear (46364)
- 1x Febi Guide, timing chain (25468)
- 1x Febi Guide, timing chain (38376)
- 1x Febi Tensioner, timing chain (25412)
- 1x Febi Timing Chain (40006)
£107.66
Important compatibility info
| Weight | 1.100 kg |
| Placement on Vehicle | Rear Axle |
| Material | Rubber/Metal |
| Outer diameter | 77 mm |
| Type | Bush Set, axle beam |
| Function | Bush Set, axle beam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£107.66
Important compatibility info
| Weight | 3.282 kg |
| Placement on Vehicle | Front Axle Left, Lower |
| Material | Aluminium |
| Steering arm type | Control Arm |
| Paired article numbers | 26656 |
| Function | Control/Trailing Arm, wheel suspension |
| Extra Description | ProKit |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with fastening/mounting material, with holder |
| Additional Information 2 | with bearing, with ball joint |
| Additionally Required Parts | 31 10 6 772 199, 31 10 6 757 145, 7 12 9 906 196 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (26641)
- 1x Febi Mounting, control/trailing arm (18687)
- 1x Febi Mounting and Bolting Kit, control/trailing arm (104977)
£107.66
Important compatibility info
| Function | Mounting, engine |
| Type | Mounting, engine |
| Number of Connectors / Ports | 1 |
| for OE number | 4G0 199 381 NF |
| Weight | 1.565 kg |
| Bearing/Mounting Type | electrically adjustable hydro mount |
Additional Information
Technical Information
Not replaceable by 4G0 199 381 NG (febi 180461 / SWAG 33 10 7686).
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£107.66
Important compatibility info
| Function | Release Fork, clutch |
| Weight | 3.306 kg |
| Type | Release Fork, clutch |
| Additional Information 2 | with bolts/screws |
| Additional Information | with bush, with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£107.65
Important compatibility info
| Thread Length | 37 mm |
| Shaft Length | 103 mm |
| Function | Cylinder Head Bolt Set |
| Weight | 9.96 kg |
| Length | 152 mm |
| Spanner Size | 17 |
| External Thread Size | M12 x 1,75 |
| Type | Cylinder Head Bolt Set |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 8x Febi Cylinder Head Bolt (18476)
- 34x Febi Cylinder Head Bolt (18477)
£107.65
Important compatibility info
| Function | Water Pump, engine cooling |
| Water pump impeller material | Grey Cast Iron |
| Material | Grey Cast Iron |
| Number of Wings | 8 |
| Seal Material | Rubber |
| Weight | 3.76 kg |
| Type | Water Pump, engine cooling |
| Additional Information | with gasket/seal |
| Additional Information 2 | with seal ring, with bolts |
| for OE number | 5 0036 1919 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£107.65
Important compatibility info
| Width of castor bearing surface | 24 mm |
| Width | 70 mm |
| Material | Plastic |
| Outer diameter | 70 mm |
| Operating Mode | Automatic |
| Weight | 0.435 kg |
| Type | Belt Tensioner, v-ribbed belt |
| Function | Belt Tensioner, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£107.65
Important compatibility info
| Width | 68 mm |
| Function | Wheel Bearing Kit |
| Sealing lip material | NBR (nitrile butadiene rubber) |
| Outer diameter | 89 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Bearing Type | Angular Ball Bearing |
| Weight | 4.930 kg |
| Inner diameter | 30 mm |
| Type | Wheel Bearing Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£107.65
Important compatibility info
| Sealing lip material | NBR (nitrile butadiene rubber) |
| Function | Wheel Bearing Kit |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Width | 64.5 mm |
| Additional Information 2 | with integrated magnetic sensor ring, with ABS sensor ring |
| Type | Wheel Bearing Kit |
| Weight | 3.303 kg |
| Bearing Type | Angular Ball Bearing |
| Inner diameter | 27 mm |
| Outer diameter | 83 mm |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£107.65
Important compatibility info
| Weight | 1.146 kg |
| Operating Mode | Automatic |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Metal |
| Width of castor bearing surface | 30.5 mm |
| for OE number | 31170-RZP-G04 |
| Type | Belt Tensioner, v-ribbed belt |
| Outer diameter | 70 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£107.65
Important compatibility info
| Extra Description | ProKit |
| Function | Joint, propshaft |
| Weight | 0.97 kg |
| Type | Joint, propshaft |
| Additional Information 2 | with bolts/screws, with washers |
| Additional Information | with nuts |
| Number of Holes | 6 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Joint, propshaft (23144)
- 3x Febi Screw (43594)
- 3x Febi Screw (43417)
- 6x Febi Nut (43418)
- 6x Febi Washer (43419)
£107.65
Important compatibility info
| Number of mounting bores | 3 |
| Type | Central Slave Cylinder, clutch |
| Weight | 0.456 kg |
| for OE number | 1 672 781 |
| Function | Central Slave Cylinder, clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£107.61
Important compatibility info
| Additional Information 2 | Requires special tools for mounting |
| Chain Type | Simplex, with chain lock |
| Number of Chain Links | 190 |
| Timing Chain Size | G68HRF |
| Function | Timing Chain |
| Type | Timing Chain |
| Weight | 1.040 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£107.61
Important compatibility info
| Outer diameter | 300 mm |
| Thickness | 84.7 mm |
| Placement on Vehicle | Rear Axle |
| Function | Brake Disc |
| Centering Diameter | 52.3 mm |
| Weight | 7.54 kg |
| Minimum thickness | 9.5 mm |
| Additional Information 2 | with ABS sensor ring |
| Bolt Hole Circle Diameter | 108 mm |
| Rim Hole Number | 5 -Hole |
| Surface | Oiled |
| Type | Brake Disc Rotor |
| Brake Disc Thickness | 11 mm |
| Rotor Style | Solid |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£107.61
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023