Proud to be a UK-based company
Contact us
Important compatibility info
| Steering arm type | Trailing Arm |
| Bore Diameter | 21 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Hole Spacing | 130 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Length | 288 mm |
| Weight | 6.800 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£106.69
Important compatibility info
| Function | Master Cylinder, clutch |
| Additional Information | with gasket/seal |
| Bore Diameter | 16 mm |
| Fill Medium | Brake Fluid |
| Driver Position | for right-hand drive vehicles |
| Type | Master Cylinder, clutch |
| Weight | 0.264 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£106.68
Important compatibility info
| Additional Information 2 | with screw |
| Function | Drive Shaft |
| Type | Drive Shaft |
| Placement on Vehicle | Front Axle Right |
| Weight | 7.632 kg |
| External Teeth, Wheel Side | 37 |
| External Teeth, Diff.Side | 27 |
| Min. Length | 863 mm |
| Transmission-side joint diameter | 81 mm |
| Wheel Sided Joint Diameter | 89 mm |
| Thread Size | M16x1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£106.66
Important compatibility info
| Placement on Vehicle | Front Axle |
| Rod/Strut | Push Rod |
| Type | Centre Rod Assembly |
| Pipe Diameter | 52 mm |
| Weight | 10.650 kg |
| Length | 895 mm |
| Additional Information 2 | with crown nut |
| Cone Size | 28.8 mm |
| Adjustable | Adjustable on one side |
| Extra Description | ProKit |
| Function | Centre Rod Assembly |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£106.66
Important compatibility info
| Weight | 6.474 kg |
| Placement on Vehicle | Front Axle, from 1st idler arm to the 2nd idler arm |
| Length | 989 mm |
| Width | 69 mm |
| Thickness | 128 mm |
| Rod/Strut | Push Rod |
| Cone Size | 30 mm |
| Pipe Diameter | 32 mm |
| Function | Centre Rod Assembly |
| Internal Thread Size | M24 x 1,5 RHT |
| External Thread Size | M24 x 1,5 RHT |
| Extra Description | ProKit |
| Type | Centre Rod Assembly |
| Additional Information | with castellated nut and split pins |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£106.66
Important compatibility info
| Weight | 2.94 kg |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Operating Mode | Pneumatic |
| Placement on Vehicle | Front |
| Min. Length | 284 mm |
| Max. Length | 379 mm |
| Pipe Diameter | 44 mm. 53 mm |
| Mounting points diameter | 12 mm |
| Piston conrod diameter | 13 mm |
| Function | Shock Absorber, driver cab suspension |
| External Thread Size | M10 x 1 |
| Type | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£106.66
Important compatibility info
| Voltage | 12 V |
| Number of Ribs | 4 |
| Pulleys | with belt pulley |
| Alternator Charge Current | 60 A |
| Belt Pulley Diameter | 55 mm |
| Weight | 4.6 kg |
| Current Strength | 60 A |
| Type | Alternator |
| Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£106.66
Important compatibility info
| Operating Mode | Automatic |
| Outer diameter | 65 mm |
| Weight | 2.198 kg |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Metal |
| Type | Belt Tensioner, v-ribbed belt |
| Vibration | with vibration damper |
| Width of castor bearing surface | 30 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£106.66
Important compatibility info
| Additional Information | with Thrust Bearing |
| Outer diameter | 37.5 mm |
| Additional Information 2 | with bearing |
| Weight | 2.58 kg |
| Type | Repair Kit, kingpin |
| Function | Repair Kit, kingpin |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Extra Description | ProKit |
| Length | 192 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Kingpin (14578)
- 1x Febi Bush, kingpin (14588)
- 1x Febi Bush, steering knuckle (14575)
- 1x Febi Bush, steering knuckle (14576)
- 2x Febi Seal Ring, steering knuckle (14577)
- 2x Febi Lock Ring, steering knuckle (14579)
- 2x Febi Sealing/Protective Cap (08522)
- 2x Febi Circlip (14933)
- 2x Febi Grease Nipple (01094)
- 1x Febi Spacer, kingpin (14580)
- 1x Febi Spacer, kingpin (14581)
- 1x Febi Spacer, kingpin (14582)
- 1x Febi Spacer, kingpin (14583)
- 1x Febi Spacer, kingpin (14584)
- 1x Febi Spacer, kingpin (14585)
- 1x Febi Spacer, kingpin (14586)
- 1x Febi Spacer, kingpin (14587)
£106.66
Important compatibility info
| Minimum thickness | 28 mm |
| Bolt Hole Circle Diameter | 275 mm |
| Brake Disc Thickness | 34 mm |
| Brake Disc Type | Internally Vented |
| Outer diameter | 330 mm |
| Thickness | 141 mm |
| Placement on Vehicle | Front Axle, Rear Axle |
| Function | Brake Disc |
| Surface | Coated |
| Number of Holes | 8 |
| Weight | 23.2 kg |
| Additional Information 2 | with ABS sensor ring |
| Type | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£106.66
Important compatibility info
| Weight | 1.28 kg |
| Function | Oil Pump |
| for OE number | 06A 115 105 B S1 |
| Type | Oil Pump |
| Additional Information | with oil pump chain, with chain tensioner |
| Timing Chain Size | G52H |
| Additional Information 2 | with gear |
| Number of Teeth | 50 |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Chain, oil pump drive (33638)
- 1x Febi Chain Tensioner, oil pump drive (33637)
- 1x Febi Oil Pump (22204)
£106.66
Important compatibility info
| Number of Teeth, ABS ring | 29 |
| Weight | 2.10 kg |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Width | 59.2 mm |
| Outer diameter | 129 mm |
| Inner diameter | 25 mm |
| Number of Holes | 4 |
| Bolt Hole Circle Diameter | 108 mm |
| Bearing Type | Angular Ball Bearing |
| Function | Wheel Bearing Kit |
| Type | Wheel Bearing Kit |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with ABS sensor ring |
| Additional Information | with axle nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£106.66
Important compatibility info
| Cone Size | 30 mm |
| Pipe Diameter | 40 mm |
| Function | Centre Rod Assembly |
| Length | 872 mm |
| Outer diameter | 40 mm |
| Rod/Strut | Push Rod |
| External Thread Size | M24 x 1,5, M30 x 1,5 |
| Colour | Black |
| Thread Type | with right-hand thread |
| Weight | 8.000 kg |
| Extra Description | ProKit |
| Type | Centre Rod Assembly |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£106.66
Important compatibility info
| Thread Length | 37 mm |
| Shaft Length | 103 mm |
| Function | Cylinder Head Bolt Set |
| Weight | 9.96 kg |
| Length | 152 mm |
| Spanner Size | 17 |
| External Thread Size | M12 x 1,75 |
| Type | Cylinder Head Bolt Set |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 8x Febi Cylinder Head Bolt (18476)
- 34x Febi Cylinder Head Bolt (18477)
£106.66
Important compatibility info
| Additional Information | with gaskets/seals |
| Weight | 1.86 kg |
| Function | Seal Kit, multi-valve |
| Type | Seal Kit, multi-valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£106.66
Important compatibility info
| Inner diameter | 167 mm |
| Filter type | Filter Insert |
| Weight | 3.30 kg |
| Outer diameter | 303 mm |
| Height | 525 mm |
| Type | Air Filter |
| Function | Air Filter |
| for OE number | 1 869 994 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£106.66
Important compatibility info
| Additional Information 2 | with crown nut |
| Function | Tie Rod |
| Extra Description | ProKit |
| Type | Tie Rod |
| Length | 1645 mm |
| Placement on Vehicle | Front Axle |
| Internal Thread Size | M30 x 1,5 LHT, M30 x 1,5 RHT |
| External Thread Size | M20 x 1,5 |
| Weight | 12.5 kg |
| Pipe Diameter | 42 mm |
| Cone Size | 28.6 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£106.66
Important compatibility info
| Inner diameter | 20 mm |
| Operating Mode | Hydraulic |
| Type | Hydraulic Pump, steering |
| Mounting points diameter | 8.5 mm |
| Number of mounting bores | 2 |
| Weight | 1.855 kg |
| Number of Connectors / Ports | 2 |
| Rotation Direction | Clockwise rotation |
| Operating pressure to | 10 bar |
| Function | Hydraulic Pump, steering |
| Internal Thread Size | M16 x 1,5 |
| Pulleys | with belt pulley |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£106.66
Important compatibility info
| Pipe Diameter | 50 mm |
| Adjustable | Adjustable on one side |
| Placement on Vehicle | Front Axle |
| Weight | 7.8 kg |
| Cone Size | 30 mm |
| Length | 635 mm |
| Internal Thread Size | M38 x 1,5 LHT, M30 x 1,5 RHT |
| External Thread Size | M24 x 1,5 |
| Function | Tie Rod |
| Extra Description | ProKit |
| Type | Tie Rod |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£106.66
Important compatibility info
| Function | Camshaft |
| Weight | 2.325 kg |
| Type | Camshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£106.66
Important compatibility info
| Function | Tensioner, timing belt |
| Weight | 0.458 kg |
| for OE number | 3517998 |
| Type | Tensioner, timing belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£106.66
Important compatibility info
| Weight | 3.209 kg |
| Extra Description | febi Plus |
| Function | Cylinder Head Cover |
| Type | Cylinder Head Cover |
| Colour | Black |
| Material | Plastic |
| Additional Information | with gasket/seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£106.66
Important compatibility info
| Type | Bellow, air suspension |
| Placement on Vehicle | Rear Axle, Front Axle |
| Additional Information | with piston |
| Outer diameter | 270 mm. 227 mm |
| Weight | 6.4 kg |
| Function | Bellow, air suspension |
| Thickness | 220 mm. 480 mm |
| Rolling piston material | Aluminium |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£106.63
Important compatibility info
| Weight | 0.69 kg |
| for OE number | 116 050 16 11 |
| Function | Tensioner, timing chain |
| Type | Tensioner, timing chain |
| Additional Information | with gasket/seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£106.62
Important compatibility info
| Housing Type | with housing |
| Number of Connectors / Ports | 4 |
| Resistor Type | Hot-film Sensor |
| Function | Mass Air Flow Sensor |
| Weight | 0.211 kg |
| Type | Mass Air Flow Sensor |
| for OE number | 1920.RL |
| Additional Information | with gasket/seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£106.62
Important compatibility info
| Number of Chain Links | 154 |
| Function | Timing Chain Kit |
| for OE number | 13028-4M51A S2 |
| Weight | 2.380 kg |
| Chain Type | Silent Chain, Closed chain |
| Type | Timing Chain Kit |
| Extra Description | Standard Medium Kit |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (100629)
- 1x Febi Tensioner, timing chain (104189)
- 1x Febi Guide, timing chain (173850)
- 1x Febi Guide, timing chain (173855)
- 1x Febi Guide, timing chain (173857)
- 2x Febi Gear/Sprocket, camshaft (173858)
- 1x Febi Sprocket, crankshaft (173860)
- 1x Febi Shaft Seal, crankshaft (107663)
£106.62
Important compatibility info
| Weight | 7.526 kg |
| External Teeth, Diff.Side | 26 |
| Min. Length | 687 mm |
| Wheel Sided Joint Diameter | 88.9 mm |
| Transmission-side joint diameter | 85.2 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
| Thread Size | M24x1,5 |
| Additional Information 2 | with nut |
| Additional Information | with Split Pin |
| Placement on Vehicle | Front Axle Left |
| External Teeth, Wheel Side | 29 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£106.59
Important compatibility info
| Additional Information | with rubber mounts |
| Weight | 3.68 kg |
| Length | 1045 mm |
| Placement on Vehicle | Front Axle |
| Function | Stabiliser Bar, suspension |
| Type | Stabiliser Bar, suspension |
| Stabiliser Diameter | 22 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£106.55
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Front Axle Right, Lower |
| Material | Aluminium |
| Additional Information 2 | with ball joint |
| Steering arm type | Control Arm |
| Type | Control/Trailing Arm, wheel suspension |
| External Thread Size | M16 x 1,5 |
| Cone Size | 19 mm |
| Paired article numbers | 183286 |
| Weight | 2.368 kg |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£106.53
Important compatibility info
| Function | Mounting, manual transmission |
| Weight | 3.536 kg |
| Placement on Vehicle | Left, Upper |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, manual transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£106.52
Important compatibility info
| Rotor Style | Slotted/Internally Vented |
| Rim Hole Number | 5 -Hole |
| Weight | 9.61 kg |
| Placement on Vehicle | Front Axle |
| Outer diameter | 340 mm |
| Thickness | 63 mm |
| Brake Disc Thickness | 28 mm |
| Minimum thickness | 26 mm |
| Bolt Hole Circle Diameter | 114.3 mm |
| Centering Diameter | 68 mm |
| Surface | Coated |
| Number of mounting bores | 2 |
| Machining | High-carbon |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£106.46
Important compatibility info
| Function | Auxiliary water pump (cooling water circuit) |
| Type | Auxiliary water pump (cooling water circuit) |
| for OE number | 203 835 00 64 |
| Weight | 0.43 kg |
| Number of Connectors / Ports | 2 |
| Voltage | 12 V |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£106.45
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Shock Absorber Type | Oil Pressure |
| Weight | 4.44 kg |
| Shock Absorber Mounting Type | Top pin, Bottom Pin |
| Function | Shock Absorber |
| Piston conrod diameter | 15 mm |
| Pipe Diameter | 63.4 mm. 54 mm |
| Max. Length | 605 mm |
| Min. Length | 364 mm |
| External Thread Size | M14 x 1,5 |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£106.41
Important compatibility info
| Function | Shock Absorber |
| Pipe Diameter | 74 mm. 63 mm |
| Mounting points diameter | 14 mm |
| Piston conrod diameter | 14 mm |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top pin, Bottom eye |
| Placement on Vehicle | Front Axle, Rear Axle |
| Max. Length | 785 mm |
| Weight | 3.96 kg |
| Replaces | 20009 |
| Min. Length | 464 mm |
| External Thread Size | M14 x 1,5 |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£106.41
Important compatibility info
| Steering arm type | for control arm |
| Placement on Vehicle | Front Axle Left |
| Type | Ball Joint |
| Function | Ball Joint |
| Extra Description | ProKit |
| Weight | 5.905 kg |
| Thickness | 175 mm |
| External Thread Size | M30 x 1,5 |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£106.38
Important compatibility info
| Additional Information | with adjuster |
| Weight | 0.296 kg |
| for OE number | 13513995 |
| Type | Tailgate Lock |
| Function | Tailgate Lock |
| Extra Description | febi Plus |
| Number of Connectors / Ports | 4 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£106.36
Important compatibility info
| Operating Mode | Electric |
| Voltage | 12 V |
| Height | 85 mm |
| Weight | 1.09 kg |
| Number of Connectors / Ports | 6 |
| Function | Throttle body |
| Type | Throttle body |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£106.34
Important compatibility info
| Voltage | 12 V |
| Number of Connectors / Ports | 6 |
| Function | Throttle body |
| Weight | 0.805 kg |
| Type | Throttle body |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£106.34
Important compatibility info
| Placement on Vehicle | steered leading axle |
| Length | 1025 mm |
| Additional Information 2 | with crown nut |
| Rod/Strut | Guide Rod |
| Weight | 9.96 kg |
| Cone Size | 28.6 mm |
| Adjustable | Adjustable on one side |
| Type | Tie Rod |
| Function | Tie Rod |
| Extra Description | ProKit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£106.31
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Function | Drive Shaft |
| Type | Drive Shaft |
| External Teeth, Diff.Side | 29 |
| Min. Length | 619 mm |
| Wheel Sided Joint Diameter | 95 mm |
| Transmission-side joint diameter | 85 mm |
| Additional Information 2 | with nut |
| Additional Information | with Split Pin |
| External Teeth, Wheel Side | 29 |
| Weight | 7.664 kg |
| Thread Size | M24x1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£106.29
Important compatibility info
| Function | Link/Coupling Rod, stabiliser bar |
| Type | Link/Coupling Rod, stabiliser bar |
| Weight | 8.000 kg |
| Bore Diameter | 42 mm |
| Rod/Strut | Pull Rod |
| Length | 415 mm |
| Placement on Vehicle | Rear Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£106.25
Important compatibility info
| Weight | 5.082 kg |
| Function | Water Pump, engine cooling |
| Seal Material | Paper |
| Water pump impeller material | Metal |
| Number of Wings | 7 |
| Type | Water Pump, engine cooling |
| Additional Information | with gasket/seal |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£106.24
Important compatibility info
| Max. Length | 491 mm |
| Piston conrod diameter | 17 mm |
| Weight | 6.84 kg |
| Shock Absorber Type | Oil Pressure |
| Pipe Diameter | 74 mm. 66 mm |
| External Thread Size | M16 x 1,5 |
| Function | Shock Absorber |
| Type | Shock Absorber |
| Min. Length | 335 mm |
| Shock Absorber Design | Telescopic Shock Absorber |
| Shock Absorber Mounting Type | Top pin, Bottom Pin |
| Placement on Vehicle | Front Axle, Rear Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£106.21
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 1515 mm |
| Rod/Strut | Push Rod |
| Cone Size | 30 mm |
| Pipe Diameter | 42 mm |
| Function | Centre Rod Assembly |
| Weight | 11.7 kg |
| Extra Description | ProKit |
| Type | Centre Rod Assembly |
| Additional Information | with nuts |
| External Thread Size | M24 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£106.21
Important compatibility info
| Rim Hole Number | 4 -Hole |
| Weight | 6.8 kg |
| Minimum thickness | 9 mm |
| Bolt Hole Circle Diameter | 100 mm |
| Centering Diameter | 55 mm |
| Surface | Oiled |
| Function | Brake Disc |
| Brake Disc Thickness | 10 mm |
| Thickness | 10 mm |
| Outer diameter | 270 mm |
| Placement on Vehicle | Rear Axle |
| Rotor Style | Solid |
| Type | Brake Disc Rotor |
| Additional Information 2 | with grease cap, with ABS sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£106.20
Important compatibility info
| Function | Brake Disc |
| Number of mounting bores | 1 |
| Machining | High-carbon |
| Surface | Coated |
| Centering Diameter | 67 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Minimum thickness | 24 mm |
| Brake Disc Thickness | 26 mm |
| Thickness | 50.7 mm |
| Outer diameter | 330 mm |
| Placement on Vehicle | Rear Axle |
| Weight | 8.48 kg |
| Rim Hole Number | 5 -Hole |
| Rotor Style | perforated/vented, slotted |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£106.20
Important compatibility info
| Vehicle Equipment | for vehicles with electric parking brake |
| Paired article numbers | 181887 |
| Weight | 3.0 kg |
| Type | Brake Caliper |
| Function | Brake Caliper |
| Brake caliper piston diameter | 36 mm |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Additional Information | with electric motor |
| Material | Cast Iron |
| Placement on Vehicle | Rear Axle Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£106.19
Important compatibility info
| Brake caliper piston diameter | 36 mm |
| Placement on Vehicle | Rear Axle Right |
| Additional Information | with electric motor |
| Material | Cast Iron |
| Vehicle Equipment | for vehicles with electric parking brake |
| Weight | 3.0 kg |
| Function | Brake Caliper |
| Type | Brake Caliper |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 181886 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£106.19
Important compatibility info
| Operating Mode | Electronic |
| Number of Connectors / Ports | 6 |
| Weight | 0.77 kg |
| for OE number | 23890980 |
| Type | Accelerator Pedal |
| Function | Accelerator Pedal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£106.17
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Length | 654 mm |
| Steering arm type | Trailing Arm |
| Pipe Diameter | 48 mm |
| Mounting points diameter | 17 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Weight | 7.9 kg |
| Type | Control/Trailing Arm, wheel suspension |
| Hole Spacing | 115 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£106.16
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023