Important compatibility info
Function | Camshaft Adjuster |
Extra Description | febi Plus |
Type | Camshaft Adjuster |
Weight | 0.647 kg |
Additional Information 2 | without screw |
Placement on Vehicle | Intake Side |
Number of Teeth | 46 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Rim Hole Number | 5 -Hole |
Rotor Style | Solid |
Weight | 6.96 kg |
Placement on Vehicle | Rear Axle |
Outer diameter | 260 mm |
Thickness | 86.2 mm |
Brake Disc Thickness | 8 mm |
Minimum thickness | 7 mm |
Bolt Hole Circle Diameter | 114.3 mm |
Function | Brake Disc |
Surface | Oiled |
Centering Diameter | 52.3 mm |
Type | Brake Disc Rotor |
Additional Information 2 | with grease cap, with ABS sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Water Pump, engine cooling |
Material | Grey Cast Iron |
Water pump impeller material | Grey Cast Iron |
Weight | 11.5 kg |
Seal Material | Rubber, Paper |
Number of Wings | 12 |
Type | Water Pump, engine cooling |
Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 222 mm |
Width | 44 mm |
Outer diameter | 73 mm |
Thickness | 142 mm |
Inner diameter | 47 mm |
Weight | 0.925 kg |
Function | Suspension, propshaft |
Type | Suspension, propshaft |
Additional Information 2 | with ball bearing |
Bearing Type | Rolling Bearing |
Hole Spacing | 195 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Track rollers material | Metal |
Additional Information 2 | with ball joint |
Material | Aluminium |
Placement on Vehicle | Left, Lower Front Axle |
Function | Control/Trailing Arm, wheel suspension |
Steering arm type | Control Arm |
Paired article numbers | 176882 |
Rod/Strut | Pull Rod |
Weight | 4.742 kg |
Cone Size | 22.7 mm |
Type | Control/Trailing Arm, wheel suspension |
External Thread Size | M14 x 1,5 |
Additional Information | with hydro mount, with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.694 kg |
Width of castor bearing surface | 39 mm |
Outer diameter | 65 mm |
Function | Belt Tensioner, V-ribbed belt |
Material | Metal |
Type | Belt Tensioner, V-ribbed belt |
Operating Mode | Automatic |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Internal Thread Size | M22 x 1,5 |
Weight | 9.8 kg |
Type | Spring-loaded Cylinder |
Distance of fastening bolts | 120 mm |
Piston Rod Length | 15 mm |
Function | Spring-loaded Cylinder |
Placement on Vehicle | Right |
Paired article numbers | 184763 |
Brake Type | Disc Brake |
Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle |
Length | 745 mm |
Steering arm type | Control Arm |
Bore Diameter | 21 mm |
Weight | 11.600 kg |
Pipe Diameter | 50 mm |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.58 kg |
Function | Tensioner, timing chain |
Operating Mode | Hydraulic |
Type | Tensioner, timing chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 4.800 kg |
Placement on Vehicle | both sides |
Bearing/Mounting Type | Rubber-Metal Mount |
Function | Mounting, engine |
Type | Mounting, engine |
External Thread Size | M18 x 1,5 |
for OE number | 960 241 00 14 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 379 mm |
Outer diameter | 300 mm |
Number of Connectors / Ports | 5 |
Weight | 7.0 kg |
Capacity | 20 l |
Operating Pressure | 12.5 bar |
Type | Air Tank, compressed-air system |
Function | Air Tank, compressed-air system |
Internal Thread Size | M22 x 1,5 |
Material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Width of castor bearing surface | 46 mm |
Material | Metal |
Outer diameter | 74 mm |
Operating Mode | Automatic |
Weight | 1.608 kg |
Type | Belt Tensioner, V-ribbed belt |
Function | Belt Tensioner, V-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Oil Pump |
Weight | 1.275 kg |
Type | Oil Pump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.525 kg |
Type | Oil Line, charger |
Forward- /Backflow | Supply Line |
Function | Oil Line, charger |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Rod/Strut | Push Rod |
Length | 620 mm |
Outer diameter | 40 mm |
Weight | 7.3 kg |
Cone Size | 30.2 mm |
Thread Type | with left-hand thread, with right-hand thread |
Placement on Vehicle | from 1st idler arm to the 2nd idler arm |
Pipe Diameter | 38 mm |
Function | Centre Rod Assembly |
Additional Information | with castellated nut and split pins |
External Thread Size | M24 x 1,5 |
Internal Thread Size | M30 x 1,5 LHT, M30 x 1,5 RHT |
Driver Position | for left-hand/right-hand drive vehicles |
Extra Description | ProKit |
Type | Centre Rod Assembly |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 6.66 kg |
Voltage | 12 V |
Function | Alternator |
Type | Alternator |
Number of Ribs | 5 |
Pulleys | with belt pulley |
Alternator Charge Current | 120 A |
Belt Pulley Diameter | 54 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Seal Material | Rubber |
Weight | 9.46 kg |
Material | Grey Cast Iron |
Function | Water Pump, engine cooling |
Number of Wings | 12 |
Water pump impeller material | Grey Cast Iron |
Replaces | 12848 |
Type | Water Pump, engine cooling |
Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Placement on Vehicle | Lower, Front Axle Right |
Material | Sheet Steel |
Additional Information 2 | with ball joint |
Steering arm type | Control Arm |
Paired article numbers | 43020 |
Cone Size | 20 mm |
External Thread Size | M16 x 1,5 |
Weight | 6.995 kg |
Additional Information | with crown nut and split pin, with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Width of castor bearing surface | 24 mm |
Width | 70 mm |
Material | Plastic |
Outer diameter | 70 mm |
Operating Mode | Automatic |
Weight | 0.435 kg |
Type | Belt Tensioner, v-ribbed belt |
Function | Belt Tensioner, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Cylinder Head, air compressor |
Weight | 2.2 kg |
Type | Cylinder Head, air compressor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023