Important compatibility info
Seal Material | Rubber |
Weight | 9.46 kg |
Material | Grey Cast Iron |
Function | Water Pump, engine cooling |
Number of Wings | 12 |
Water pump impeller material | Grey Cast Iron |
Replaces | 12848 |
Type | Water Pump, engine cooling |
Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Placement on Vehicle | Lower, Front Axle Right |
Material | Sheet Steel |
Additional Information 2 | with ball joint |
Steering arm type | Control Arm |
Paired article numbers | 43020 |
Cone Size | 20 mm |
External Thread Size | M16 x 1,5 |
Weight | 6.995 kg |
Additional Information | with crown nut and split pin, with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Width of castor bearing surface | 24 mm |
Width | 70 mm |
Material | Plastic |
Outer diameter | 70 mm |
Operating Mode | Automatic |
Weight | 0.435 kg |
Type | Belt Tensioner, v-ribbed belt |
Function | Belt Tensioner, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle |
Length | 1734 mm |
Width | 35 mm |
Rod/Strut | Guide Rod |
Cone Size | 26 mm |
Pipe Diameter | 40 mm |
Weight | 11.0 kg |
Thickness | 103 mm |
External Thread Size | M20 x 1,5 |
Internal Thread Size | M30 x 1,5 LHT |
Function | Tie Rod |
Extra Description | ProKit |
Type | Tie Rod |
Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Cylinder Head, air compressor |
Weight | 2.2 kg |
Type | Cylinder Head, air compressor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Left Front |
Operating Mode | Electric |
Paired article numbers | 26720 |
Function | Window Regulator |
Additional Information | without electric motor |
Type | Window Regulator |
Weight | 1.44 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Connectors / Ports | 2 |
Weight | 0.282 kg |
Voltage | 19 V |
Spanner Size | 36 |
Function | Glow Plug |
Glow Plug Type | Flame Glow Plug |
Type | Glow Plug |
External Thread Size | M32 x 1,5 |
Length | 102 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Left Front |
Additional Information | with electric motor |
Type | Window Regulator |
Function | Window Regulator |
Operating Mode | Electric |
Weight | 1.6 kg |
Paired article numbers | 180627 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.07 kg |
Number of Connectors / Ports | 2 |
Function | Sensor, exhaust gas temperature |
Placement on Vehicle | before soot particulate filter, Left |
Type | Sensor, exhaust gas temperature |
for OE number | 07Z 906 088 A |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Belt Pulley, crankshaft |
Parameter | 6PK |
Number of Ribs | 5 |
Inner diameter | 10 mm. 45 mm |
Outer diameter | 185 mm |
Material | Rubber/Metal |
Weight | 3.34 kg |
Type | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
for OE number | 403 180 17 01 |
Weight | 4.5 kg |
Type | Oil Pump |
Function | Oil Pump |
Number of Teeth | 44. 6 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Voltage | 12 V |
Number of Ribs | 4 |
Pulleys | with belt pulley |
Alternator Charge Current | 70 A |
Belt Pulley Diameter | 55 mm |
Weight | 4.6 kg |
for OE number | 31400-60G13-000 |
Type | Alternator |
Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 3.5 kg |
External Thread Size | M12 x 1,75 |
Placement on Vehicle | Rear |
Operating Mode | Pneumatic |
Shock Absorber Mounting Type | Top eye, Bottom eye |
Max. Length | 396 mm |
Min. Length | 314 mm |
Pipe Diameter | 45 mm. 55 mm |
Mounting points diameter | 16 mm |
Piston conrod diameter | 20 mm |
Type | Shock Absorber, driver cab suspension |
Function | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle |
Length | 1679 mm |
Extra Description | ProKit |
Function | Tie Rod |
Type | Tie Rod |
Pipe Diameter | 52 mm |
Cone Size | 30 mm |
Weight | 16.5 kg |
External Thread Size | M24 x 1,5 |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Chain Links | 138 |
Extra Description | Basic Short Kit |
Function | Timing Chain Kit |
Type | Timing Chain Kit |
Weight | 1.039 kg |
Chain Type | Silent Chain, Closed chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (108221)
- 1x Febi Tensioner, timing chain (180751)
- 1x Febi Guide, timing chain (180870)
- 1x Febi Guide, timing chain (180868)
Important compatibility info
Number of Chain Links | 134 |
Weight | 1.182 kg |
Type | Timing Chain Kit |
Function | Timing Chain Kit |
for OE number | 1 717 599 S1 |
Chain Type | Simplex, Closed chain |
Extra Description | Basic Short Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (182108)
- 1x Febi Tensioner, timing chain (46511)
- 1x Febi Guide, timing chain (179385)
- 1x Febi Guide, timing chain (179396)
- 1x Febi Guide, timing chain (179382)
- 1x Febi Guide, timing chain (46773)
Important compatibility info
External Teeth, Wheel Side | 30 |
Weight | 6.074 kg |
Number of mounting bores | 6 |
Bolt Hole Circle Diameter | 86 mm |
Thread Size | M27x1,5 |
Bore Diameter | 10.5 mm |
Min. Length | 682 mm |
ABS Ring Diameter | 83 mm |
Type | Drive Shaft |
Function | Drive Shaft |
Transmission-side joint diameter | 100 mm |
Placement on Vehicle | Rear Axle Right |
Additional Information 2 | with nut |
Wheel Sided Joint Diameter | 83 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.24 kg |
Operating Mode | Hydraulic |
Thickness | 54 mm |
Function | Tensioner, timing belt |
Outer diameter | 32 mm |
Type | Tensioner, timing belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Starter |
Number of Teeth | 8 |
Rated Power | 0.8 kW |
Weight | 3.28 kg |
Voltage | 12 V |
Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
for OE number | 02M 911 024 PX |
Function | Starter |
Type | Starter |
Voltage | 12 V |
Number of Teeth | 10 |
Rated Power | 1.7 kW |
Weight | 3.8 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023