Proud to be a UK-based company
Contact us
Important compatibility info
| for OE number | 02M 911 024 PX |
| Function | Starter |
| Type | Starter |
| Voltage | 12 V |
| Number of Teeth | 10 |
| Rated Power | 1.7 kW |
| Weight | 3.8 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£105.63
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Thread Size | M20x1,5 |
| External Teeth, Wheel Side | 38 |
| Weight | 12.311 kg |
| External Teeth, Diff.Side | 25 |
| Min. Length | 880 mm |
| Wheel Sided Joint Diameter | 106 mm |
| Transmission-side joint diameter | 108 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£105.63
Important compatibility info
| Weight | 2786.0 kg |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Width | 139 mm |
| Outer diameter | 139 mm |
| Thickness | 100 mm |
| Inner diameter | 28 mm |
| Bearing Type | Angular Ball Bearing |
| Function | Wheel Bearing Kit |
| Additional Information | with axle nut |
| Sealing lip material | NBR (nitrile butadiene rubber) |
| Type | Wheel Bearing Kit |
| Additional Information 2 | Wheel Bearing integrated into wheel hub |
| Bolt Hole Circle Diameter | 114 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Wheel Bearing Kit (185358)
- 1x Febi Nut (185828)
£105.63
Important compatibility info
| Weight | 2.400 kg |
| Placement on Vehicle | Right |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£105.63
Important compatibility info
| Stabiliser Diameter | 21 mm |
| Length | 1075 mm |
| Placement on Vehicle | Front Axle |
| Function | Stabiliser Bar, suspension |
| Weight | 4.55 kg |
| Additional Information | with rubber mounts |
| Extra Description | ProKit |
| Type | Stabiliser Bar, suspension |
| Additional Information 2 | with coupling rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Stabiliser Bar, suspension (36651)
- 1x Febi Repair Kit, stabiliser bush (36757)
£105.63
Important compatibility info
| Type | Mounting, engine |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Weight | 1.369 kg |
| Placement on Vehicle | Rear |
| Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£105.62
Important compatibility info
| Weight | 4.976 kg |
| Placement on Vehicle | Lower Front Axle, Right |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 14522 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | without ball joint |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£105.58
Important compatibility info
| Weight | 4.970 kg |
| Placement on Vehicle | Lower Front Axle, Left |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 14523 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | without ball joint |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£105.58
Important compatibility info
| Paired article numbers | 104660 |
| Function | Mounting, engine |
| Placement on Vehicle | Right |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, engine |
| Weight | 2.594 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£105.58
Important compatibility info
| Weight | 0.13 kg |
| Type | Pressure Converter |
| Operating Mode | Electric-pneumatic |
| Extra Description | febi Plus |
| Function | Pressure Converter |
| for OE number | 55206832 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£105.57
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Hole Spacing | 100 mm |
| Length | 813 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Bore Diameter | 17 mm |
| Steering arm type | Control Arm |
| Type | Control/Trailing Arm, wheel suspension |
| Material | Steel |
| Weight | 10.443 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£105.55
Important compatibility info
| Additional Information | with gasket/seal |
| Number of Connectors / Ports | 6 |
| Weight | 0.03 kg |
| for OE number | 13 62 7 585 680 |
| Housing Type | without housing |
| Function | Mass Air Flow Sensor |
| Resistor Type | Hot-film Sensor |
| Type | Mass Air Flow Sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£105.55
Important compatibility info
| Weight | 1.44 kg |
| Number of Connectors / Ports | 4 |
| Ignition Coil | 4 Spark |
| Function | Ignition Coil |
| Type | Ignition Coil |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£105.53
Important compatibility info
| External Thread Size | M16 x 1,5 |
| Weight | 7.5 kg |
| Additional Information | with piston |
| Placement on Vehicle | Front Axle |
| Outer diameter | 228 mm. 220 mm |
| Thickness | 433 mm. 168 mm |
| Type | Bellow, air suspension |
| Function | Bellow, air suspension |
| Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£105.52
Important compatibility info
| Steering arm type | Control Arm |
| Cone Size 2 | 22 mm |
| External Thread Size | M14 x 1,5 |
| Placement on Vehicle | Front Axle Right, Lower, outer |
| Additional Information 2 | with ball joint |
| Additional Information | with lock nut, with rubber mounts |
| Material | Aluminium |
| Function | Control/Trailing Arm, wheel suspension |
| Paired article numbers | 185610 |
| Weight | 3.120 kg |
| Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£105.47
Important compatibility info
| Type | Chain Kit, oil pump drive |
| Function | Chain Kit, oil pump drive |
| Weight | 0.288 kg |
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 62 |
| Timing Chain Size | G53HS |
| Additional Information 2 | Requires special tools for mounting |
| Extra Description | Basic Short Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (171579)
- 1x Febi Chain Tensioner, oil pump drive (171230)
£105.45
Important compatibility info
| Number of Chain Links | 186 |
| Chain Type | Silent Chain, Closed chain |
| Function | Timing Chain |
| Type | Timing Chain |
| Weight | 0.431 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£105.39
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Weight | 11.53 kg |
| Rotor Style | Internally Vented |
| Placement on Vehicle | Front Axle |
| Outer diameter | 348 mm |
| Thickness | 80.9 mm |
| Brake Disc Thickness | 30 mm |
| Minimum thickness | 28.4 mm |
| Bolt Hole Circle Diameter | 120 mm |
| Centering Diameter | 79 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Function | Brake Disc |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£105.31
Important compatibility info
| Vehicle Equipment | for vehicles with electric parking brake |
| Material | Cast Aluminium |
| Function | Brake Caliper |
| Brake caliper piston diameter | 38 mm |
| Additional Information | with electric motor |
| Type | Brake Caliper |
| Placement on Vehicle | Rear Axle Left |
| Weight | 1.82 kg |
| Paired article numbers | 182955 |
| Brake Caliper Type | Brake Caliper (1 piston) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£105.31
Important compatibility info
| Type | Brake Caliper |
| Additional Information | with electric motor |
| Placement on Vehicle | Rear Axle Right |
| Function | Brake Caliper |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Weight | 1.82 kg |
| Paired article numbers | 182954 |
| Vehicle Equipment | for vehicles with electric parking brake |
| Material | Cast Aluminium |
| Brake caliper piston diameter | 38 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£105.31
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023