Proud to be a UK-based company
Contact us
Important compatibility info
| Placement on Vehicle | Front Axle Right, Rear Axle Left |
| Length | 232 mm |
| Width | 165 mm |
| Material | Rubber/Metal |
| Weight | 11.05 kg |
| Type | Rubber Buffer, suspension |
| Function | Rubber Buffer, suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£104.71
Important compatibility info
| Weight | 2.040 kg |
| Placement on Vehicle | Right |
| Type | Mounting, engine |
| Function | Mounting, engine |
| Bearing/Mounting Type | electrically adjustable hydro mount |
| Number of Connectors / Ports | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£104.69
Important compatibility info
| Pipe Diameter | 50 mm |
| Cone Size | 30 mm |
| Weight | 14.1 kg |
| Length | 1680 mm |
| Placement on Vehicle | Front Axle |
| Function | Tie Rod |
| Extra Description | ProKit |
| External Thread Size | M24 x 1,5 |
| Internal Thread Size | M30 x 1,5 LHT |
| Type | Tie Rod |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£104.68
Important compatibility info
| Water pump impeller material | Grey Cast Iron |
| Function | Water Pump, engine cooling |
| Number of Wings | 6 |
| Material | Grey Cast Iron |
| Weight | 7.915 kg |
| Seal Material | Paper |
| Type | Water Pump, engine cooling |
| Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£104.68
Important compatibility info
| External Teeth, Wheel Side | 30 |
| Weight | 6.074 kg |
| Number of mounting bores | 6 |
| Bolt Hole Circle Diameter | 86 mm |
| Thread Size | M27x1,5 |
| Bore Diameter | 10.5 mm |
| Min. Length | 682 mm |
| ABS Ring Diameter | 83 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
| Transmission-side joint diameter | 100 mm |
| Placement on Vehicle | Rear Axle Right |
| Additional Information 2 | with nut |
| Wheel Sided Joint Diameter | 83 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£104.68
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Additional Information 2 | with bolts/screws |
| Thread Size | M16x1,5 |
| Bolt Hole Circle Diameter | 94 mm |
| Bore Diameter | 10.5 mm |
| External Teeth, Wheel Side | 36 |
| Weight | 8.562 kg |
| Number of mounting bores | 6 |
| Min. Length | 669 mm |
| Wheel Sided Joint Diameter | 103 mm |
| Transmission-side joint diameter | 107.8 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£104.68
Important compatibility info
| Function | Auxiliary water pump (cooling water circuit) |
| Type | Auxiliary water pump (cooling water circuit) |
| for OE number | 000 500 03 86 |
| Weight | 1.070 kg |
| Number of Connectors / Ports | 2 |
| Voltage | 12 V |
| Operating Mode | Electric |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£104.68
Important compatibility info
| Voltage | 12 V |
| Number of Teeth | 10 |
| Rated Power | 2.2 kW |
| Weight | 4.23 kg |
| for OE number | 005 151 66 01 |
| Type | Starter |
| Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£104.68
Important compatibility info
| Rod/Strut | Push Rod |
| Additional Information 2 | with crown nut |
| Length | 824 mm |
| Cone Size | 28.6 mm |
| Adjustable | Adjustable on one side |
| Pipe Diameter | 50 mm |
| Type | Centre Rod Assembly |
| Function | Centre Rod Assembly |
| Extra Description | ProKit |
| Weight | 8.5 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£104.68
Important compatibility info
| Additional Information | with fastening/mounting material |
| Extra Description | febi Plus |
| Weight | 0.358 kg |
| Type | Valve, crankcase ventilation |
| Function | Valve, crankcase ventilation |
| for OE number | 11 61 7 501 566 S2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Valve, crankcase ventilation (26100)
- 1x Febi Hose, crankcase ventilation (46301)
- 1x Febi Hose, crankcase ventilation (47223)
- 1x Febi Hose, crankcase ventilation (36680)
- 1x Febi Hose, crankcase ventilation (33113)
£104.68
Important compatibility info
| Weight | 0.956 kg |
| Inner length 1 | 778 mm |
| Inner length 2 | 798 mm |
| Function | Cable Pull, manual transmission |
| Type | Cable Pull, manual transmission |
| Outer length 1 | 1112 mm |
| Outer length 2 | 1139 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£104.68
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 1688 mm |
| Rod/Strut | Guide Rod |
| Cone Size | 28.6 mm |
| Weight | 12.5 kg |
| Adjustable | Adjustable on both sides |
| Pipe Diameter | 42 mm |
| Function | Tie Rod |
| Extra Description | ProKit |
| Type | Tie Rod |
| External Thread Size | M20 x 1,5 |
| Internal Thread Size | M30 x 1,5 |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£104.68
Important compatibility info
| Cone Size | 30 mm |
| Pipe Diameter | 40 mm |
| Length | 1580 mm |
| Weight | 10.37 kg |
| Placement on Vehicle | Front Axle |
| Internal Thread Size | M30 x 1,5 LHT, M30 x 1,5 RHT |
| Function | Tie Rod |
| Extra Description | ProKit |
| External Thread Size | M24 x 1,5 |
| Type | Tie Rod |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£104.68
Important compatibility info
| Weight | 11.1 kg |
| Placement on Vehicle | Front Axle, from 1st idler arm to the 2nd idler arm |
| Length | 953 mm |
| Rod/Strut | Push Rod |
| Cone Size | 30 mm |
| Pipe Diameter | 52 mm |
| Function | Centre Rod Assembly |
| Extra Description | ProKit |
| Additional Information | with castellated nut and split pins |
| Internal Thread Size | M38 x 1,5 LHT |
| External Thread Size | M24 x 1,5 |
| Type | Centre Rod Assembly |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£104.68
Important compatibility info
| Weight | 3.32 kg |
| Placement on Vehicle | Front Axle Right |
| Material | Aluminium |
| Steering arm type | Control Arm |
| Paired article numbers | 108820 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint, with rubber mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£104.68
Important compatibility info
| Placement on Vehicle | Left, outer |
| Length | 810 mm |
| Additional Information 2 | with crown nut |
| Rod/Strut | Push Rod |
| Weight | 7.318 kg |
| Cone Size | 30 mm |
| Pipe Diameter | 50 mm |
| Type | Centre Rod Assembly |
| Function | Centre Rod Assembly |
| Extra Description | ProKit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£104.68
Important compatibility info
| Number of Connectors / Ports | 2 |
| Function | Injector |
| Weight | 0.03 kg |
| Type | Injector |
| Additional Information | with gaskets/seals |
| Colour Coding | Green |
Additional Information
Technical Information
Please compare the colour coding.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£104.67
Important compatibility info
| Weight | 0.100 kg |
| Fill Medium | Brake Fluid |
| Bore Diameter | 16 mm |
| Function | Master Cylinder, clutch |
| Type | Master Cylinder, clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£104.66
Important compatibility info
| Type | Water Pump, engine cooling |
| Number of Wings | 6 |
| Additional Information | with gasket/seal |
| Material | Cast Aluminium |
| Additional Information 2 | switchable water pump, with bolts/screws |
| Weight | 0.605 kg |
| Seal Material | Rubber |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Plastic |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£104.64
Important compatibility info
| Units / Pulleys | incl. deflection pulley |
| Weight | 3.250 kg |
| Type | V-Ribbed Belt Set |
| Function | V-Ribbed Belt Set |
| Additional Information | with belt tensioner for V-ribbed belt |
| Length 1 | 1041 mm |
| Length 2 | 1815 mm |
| Number of ribs 2 | 12 |
| Belt Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of ribs 1 | 4 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi V-Ribbed Belt (40316)
- 1x Febi V-Ribbed Belt (29117)
- 1x Febi Deflection/Guide Pulley, v-ribbed belt (22974)
- 1x Febi Belt Tensioner, v-ribbed belt (22975)
£104.64
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023