Proud to be a UK-based company
Contact us
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Width | 92.5 mm |
| Additional Information | with fastening/mounting material |
| Outer diameter | 152 mm |
| Additional Information 2 | with integrated magnetic sensor ring, with ABS sensor ring |
| Inner diameter | 28 mm |
| Bolt Hole Circle Diameter | 114 mm |
| Weight | 3.785 kg |
| Bearing Type | Angular Ball Bearing |
| Type | Wheel Bearing Kit |
| Sealing lip material | NBR (nitrile butadiene rubber) |
| Function | Wheel Bearing Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£104.68
Important compatibility info
| Additional Information | with Thrust Bearing |
| Outer diameter | 37.5 mm |
| Additional Information 2 | with bearing |
| Weight | 2.58 kg |
| Type | Repair Kit, kingpin |
| Function | Repair Kit, kingpin |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Extra Description | ProKit |
| Length | 192 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Kingpin (14578)
- 1x Febi Bush, kingpin (14588)
- 1x Febi Bush, steering knuckle (14575)
- 1x Febi Bush, steering knuckle (14576)
- 2x Febi Seal Ring, steering knuckle (14577)
- 2x Febi Lock Ring, steering knuckle (14579)
- 2x Febi Sealing/Protective Cap (08522)
- 2x Febi Circlip (14933)
- 2x Febi Grease Nipple (01094)
- 1x Febi Spacer, kingpin (14580)
- 1x Febi Spacer, kingpin (14581)
- 1x Febi Spacer, kingpin (14582)
- 1x Febi Spacer, kingpin (14583)
- 1x Febi Spacer, kingpin (14584)
- 1x Febi Spacer, kingpin (14585)
- 1x Febi Spacer, kingpin (14586)
- 1x Febi Spacer, kingpin (14587)
£104.68
Important compatibility info
| Sealing lip material | NBR (nitrile butadiene rubber) |
| Function | Wheel Bearing Kit |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Width | 64.5 mm |
| Additional Information 2 | with integrated magnetic sensor ring, with ABS sensor ring |
| Type | Wheel Bearing Kit |
| Weight | 3.303 kg |
| Bearing Type | Angular Ball Bearing |
| Inner diameter | 27 mm |
| Outer diameter | 83 mm |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£104.68
Important compatibility info
| Weight | 2.94 kg |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Operating Mode | Pneumatic |
| Placement on Vehicle | Front |
| Min. Length | 284 mm |
| Max. Length | 379 mm |
| Pipe Diameter | 44 mm. 53 mm |
| Mounting points diameter | 12 mm |
| Piston conrod diameter | 13 mm |
| Function | Shock Absorber, driver cab suspension |
| External Thread Size | M10 x 1 |
| Type | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£104.68
Important compatibility info
| Cone Size | 30 mm |
| Pipe Diameter | 40 mm |
| Function | Centre Rod Assembly |
| Length | 872 mm |
| Outer diameter | 40 mm |
| Rod/Strut | Push Rod |
| External Thread Size | M24 x 1,5, M30 x 1,5 |
| Colour | Black |
| Thread Type | with right-hand thread |
| Weight | 8.000 kg |
| Extra Description | ProKit |
| Type | Centre Rod Assembly |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£104.68
Important compatibility info
| Weight | 1.28 kg |
| Function | Oil Pump |
| for OE number | 06A 115 105 B S1 |
| Type | Oil Pump |
| Additional Information | with oil pump chain, with chain tensioner |
| Timing Chain Size | G52H |
| Additional Information 2 | with gear |
| Number of Teeth | 50 |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Chain, oil pump drive (33638)
- 1x Febi Chain Tensioner, oil pump drive (33637)
- 1x Febi Oil Pump (22204)
£104.68
Important compatibility info
| Weight | 6.474 kg |
| Placement on Vehicle | Front Axle, from 1st idler arm to the 2nd idler arm |
| Length | 989 mm |
| Width | 69 mm |
| Thickness | 128 mm |
| Rod/Strut | Push Rod |
| Cone Size | 30 mm |
| Pipe Diameter | 32 mm |
| Function | Centre Rod Assembly |
| Internal Thread Size | M24 x 1,5 RHT |
| External Thread Size | M24 x 1,5 RHT |
| Extra Description | ProKit |
| Type | Centre Rod Assembly |
| Additional Information | with castellated nut and split pins |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£104.68
Important compatibility info
| Weight | 3.209 kg |
| Extra Description | febi Plus |
| Function | Cylinder Head Cover |
| Type | Cylinder Head Cover |
| Colour | Black |
| Material | Plastic |
| Additional Information | with gasket/seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£104.68
Important compatibility info
| Operating Mode | Automatic |
| Outer diameter | 65 mm |
| Weight | 2.198 kg |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Metal |
| Type | Belt Tensioner, v-ribbed belt |
| Vibration | with vibration damper |
| Width of castor bearing surface | 30 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£104.68
Important compatibility info
| Placement on Vehicle | Front Axle |
| Rod/Strut | Push Rod |
| Type | Centre Rod Assembly |
| Pipe Diameter | 52 mm |
| Weight | 10.650 kg |
| Length | 895 mm |
| Additional Information 2 | with crown nut |
| Cone Size | 28.8 mm |
| Adjustable | Adjustable on one side |
| Extra Description | ProKit |
| Function | Centre Rod Assembly |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£104.68
Important compatibility info
| Thread Length | 37 mm |
| Shaft Length | 103 mm |
| Function | Cylinder Head Bolt Set |
| Weight | 9.96 kg |
| Length | 152 mm |
| Spanner Size | 17 |
| External Thread Size | M12 x 1,75 |
| Type | Cylinder Head Bolt Set |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 8x Febi Cylinder Head Bolt (18476)
- 34x Febi Cylinder Head Bolt (18477)
£104.68
Important compatibility info
| Resistor Type | Hot-wire Sensor |
| Function | Mass Air Flow Sensor |
| Type | Mass Air Flow Sensor |
| Weight | 0.18 kg |
| Number of Connectors / Ports | 4 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£104.65
Important compatibility info
| Units / Pulleys | incl. deflection pulley |
| Weight | 3.250 kg |
| Type | V-Ribbed Belt Set |
| Function | V-Ribbed Belt Set |
| Additional Information | with belt tensioner for V-ribbed belt |
| Length 1 | 1041 mm |
| Length 2 | 1815 mm |
| Number of ribs 2 | 12 |
| Belt Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of ribs 1 | 4 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi V-Ribbed Belt (40316)
- 1x Febi V-Ribbed Belt (29117)
- 1x Febi Deflection/Guide Pulley, v-ribbed belt (22974)
- 1x Febi Belt Tensioner, v-ribbed belt (22975)
£104.64
Important compatibility info
| Length | 423 mm |
| Additional Information | with oil drain plug |
| Material | Aluminium |
| Additional Information 2 | with oil sump gasket |
| Spanner Size | 12 |
| Weight | 4.903 kg |
| Type | Oil sump |
| Function | Oil sump |
| Extra Description | febi Plus |
| External Thread Size | M10 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£104.61
Important compatibility info
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Weight | 1.200 kg |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£104.57
Important compatibility info
| Type | Centre Rod Assembly |
| Rod/Strut | Guide Rod |
| External Thread Size | M24 x 1,5 |
| Additional Information 2 | with crown nut |
| Weight | 9.150 kg |
| Length | 1076 mm |
| Adjustable | not adjustable |
| Placement on Vehicle | Front Axle Right |
| Function | Centre Rod Assembly |
| Extra Description | ProKit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£104.56
Important compatibility info
| Material | Plastic |
| Operating Mode | Electric |
| Number of Connectors / Ports | 2 |
| Weight | 0.63 kg |
| Opening Temperature | 105 °C |
| Function | Thermostat Housing |
| Type | Thermostat Housing |
| Additional Information | with gasket/seal |
| Additional Information 2 | with Temperature Switch, with sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£104.54
Important compatibility info
| Placement on Vehicle | both sides, Front |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
| Weight | 3.900 kg |
| for OE number | 2 611 113 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£104.54
Important compatibility info
| Outer diameter | 400 mm |
| Thickness | 60 mm |
| Spanner Size | 32 |
| Weight | 1.420 kg |
| Function | Fan, engine cooling |
| Type | Fan, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£104.53
Important compatibility info
| Function | Bushing, axle beam |
| Type | Bushing, axle beam |
| Inner diameter | 30 mm |
| Weight | 1.500 kg |
| Material | Rubber/Metal |
| Placement on Vehicle | Rear Axle Left, Rear, Rear Axle Right |
| Thickness | 100 mm |
| Outer diameter | 132 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£104.51
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023