Proud to be a UK-based company
Contact us
Important compatibility info
| Placement on Vehicle | Rear Axle Right |
| Additional Information | with electric motor |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Vehicle Equipment | for vehicles with electric parking brake |
| Paired article numbers | 183228 |
| Weight | 2.9 kg |
| Type | Brake Caliper |
| Function | Brake Caliper |
| Brake caliper piston diameter | 38 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£103.12
Important compatibility info
| Material | Plastic |
| Function | Mass Air Flow Sensor |
| Number of Connectors / Ports | 4 |
| Resistor Type | Hot-film Sensor |
| Weight | 0.14 kg |
| Housing Type | with housing |
| Type | Mass Air Flow Sensor |
| for OE number | 1920.GG |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£103.08
Important compatibility info
| Number of Teeth | 116 |
| Belts | with rounded tooth profile |
| Water pump impeller material | Metal |
| Seal Material | Paper |
| Weight | 1.531 kg |
| Type | Water Pump & Timing Belt Kit |
| Function | Water Pump & Timing Belt Kit |
| Replaces | 104948 |
| Width of castor bearing surface | 30 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt Kit (103080)
- 1x Febi Water Pump, engine cooling (39304)
£103.07
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Additional Information 2 | with nut |
| Thread Size | M22x1,5 |
| Paired article numbers | 181902 |
| External Teeth, Wheel Side | 29 |
| Weight | 10.358 kg |
| External Teeth, Diff.Side | 39 |
| Min. Length | 1016 mm |
| Wheel Sided Joint Diameter | 93.5 mm |
| Transmission-side joint diameter | 91.1 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£103.06
Important compatibility info
| Additional Information | with piston |
| Function | Bellow, air suspension |
| Type | Bellow, air suspension |
| Thickness | 370 mm. 146 mm |
| External Thread Size | M20 x 2,5, M14 x 1,5, M12 x 1,75 |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 259 mm. 258 mm |
| Weight | 11.7 kg |
| Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£103.05
Important compatibility info
| Weight | 0.394 kg |
| Function | Timing Belt Kit |
| Belts | with trapezoidal tooth profile |
| Number of Teeth | 116 |
| Width | 16 mm |
| Type | Timing Belt Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt (47946)
- 1x Febi Toothed Belt, power take-off (49234)
- 1x Febi Tensioner Pulley, timing belt (100320)
- 1x Febi Bolt, tensioner pulley (196873)
£103.02
Important compatibility info
| Number of Connectors / Ports | 4 |
| Weight | 0.17 kg |
| Type | Mass Air Flow Sensor |
| Resistor Type | Hot-wire Sensor |
| Function | Mass Air Flow Sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£103.02
Important compatibility info
| Function | Joint, propshaft |
| Number of Holes | 6 |
| Placement on Vehicle | Front |
| Weight | 0.741 kg |
| Type | Joint, propshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 6x Febi Screw (43413)
£102.98
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top pin, Bottom Pin |
| Max. Length | 443 mm |
| Min. Length | 273 mm |
| Pipe Diameter | 63.5 mm. 54 mm |
| Piston conrod diameter | 14 mm |
| Function | Shock Absorber |
| External Thread Size | M14 x 1,5 |
| Weight | 3.64 kg |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£102.92
Important compatibility info
| Placement on Vehicle | Right |
| Paired article numbers | 39505 |
| Weight | 2.243 kg |
| Bearing/Mounting Type | Hydro Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£102.91
Important compatibility info
| Weight | 0.07 kg |
| Placement on Vehicle | behind exhaust turbocharger |
| Number of Connectors / Ports | 2 |
| Type | Sensor, exhaust gas temperature |
| Function | Sensor, exhaust gas temperature |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£102.91
Important compatibility info
| Width | 102 mm |
| Material | Aluminium |
| Outer diameter | 65 mm |
| Operating Mode | Mechanical |
| Function | Belt Tensioner, v-ribbed belt |
| Weight | 0.784 kg |
| Type | Belt Tensioner, v-ribbed belt |
| Width of castor bearing surface | 26 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£102.88
Important compatibility info
| Function | Mounting, manual transmission |
| Placement on Vehicle | both sides |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Weight | 5.24 kg |
| Type | Mounting, manual transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£102.87
Important compatibility info
| Thickness | 430 mm. 128 mm |
| External Thread Size | M16 x 1,5 |
| Function | Bellow, air suspension |
| Type | Bellow, air suspension |
| Weight | 5.4 kg |
| Outer diameter | 228 mm. 197 mm |
| Placement on Vehicle | Rear Axle |
| Additional Information | with piston |
| Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£102.86
Important compatibility info
| Placement on Vehicle | Front Axle |
| Shock Absorber Mounting Type | Top pin, Bottom eye |
| Max. Length | 775 mm |
| Shock Absorber Type | Oil Pressure |
| Min. Length | 455 mm |
| Pipe Diameter | 63.5 mm. 54 mm |
| Piston conrod diameter | 16 mm |
| Function | Shock Absorber |
| Mounting points diameter | 16 mm |
| Weight | 3.64 kg |
| External Thread Size | M14 x 1,5 |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£102.82
Important compatibility info
| Rolling piston material | Plastic |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 258 mm. 200 mm |
| Thickness | 298 mm. 640 mm |
| Function | Bellow, air suspension |
| External Thread Size | M22 x 1,5 |
| Additional Information | with piston |
| Weight | 5.74 kg |
| Type | Bellow, air suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£102.75
Important compatibility info
| Bearing/Mounting Type | electrically adjustable hydro mount |
| Additional Information 2 | with splash protection cover |
| Number of Connectors / Ports | 2 |
| Weight | 1.700 kg |
| Type | Mounting, engine |
| Function | Mounting, engine |
| Placement on Vehicle | Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£102.71
Important compatibility info
| Weight | 0.375 kg |
| Number of Chain Links | 154 |
| Chain Type | Silent Chain, Closed chain |
| Type | Timing Chain |
| Function | Timing Chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£102.71
Important compatibility info
| Width | 26 mm |
| Number of Teeth | 141 |
| Surface | Coated |
| Weight | 1.236 kg |
| for OE number | 076 198 119 |
| Function | Timing Belt Kit |
| Units / Pulleys | incl. tensioner pulley, incl. guide pulleys |
| Type | Timing Belt Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt (34122)
- 1x Febi Tensioner Pulley, timing belt (14732)
- 1x Febi Deflection Pulley/Guide Pulley, timing belt (10045)
- 1x Febi Deflection Pulley/Guide Pulley, timing belt (07022)
£102.71
Important compatibility info
| Pipe Diameter | 50 mm |
| Cone Size | 30 mm |
| Weight | 14.1 kg |
| Length | 1680 mm |
| Placement on Vehicle | Front Axle |
| Function | Tie Rod |
| Extra Description | ProKit |
| External Thread Size | M24 x 1,5 |
| Internal Thread Size | M30 x 1,5 LHT |
| Type | Tie Rod |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£102.70
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023