Important compatibility info
Additional Information 2 | with crown nut |
Internal Thread Size | M38 x 1,5 |
Weight | 7.4 kg |
Length | 669 mm |
Rod/Strut | Push Rod |
Cone Size | 28.6 mm |
Adjustable | Adjustable on one side |
Pipe Diameter | 46 mm |
Type | Centre Rod Assembly |
Function | Centre Rod Assembly |
Extra Description | ProKit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 4.491 kg |
Type | Air Dryer, compressed-air system |
Function | Air Dryer, compressed-air system |
Voltage | 24 V |
Additional Information 2 | with dryer, with integrated oil separator |
Rated Power | 100 W |
Cut-off Pressure | 12 bar |
Operating pressure to | 13 bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Steering arm type | Control Arm |
Cone Size | 25 mm |
Paired article numbers | 180968 |
Weight | 7.631 kg |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Placement on Vehicle | Front Axle Right |
Material | Sheet Steel |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.943 kg |
Type | Belt Tensioner, v-ribbed belt |
Operating Mode | Automatic |
Outer diameter | 70 mm |
Material | Metal |
Width of castor bearing surface | 30 mm |
Function | Belt Tensioner, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Connectors / Ports | 4 |
Weight | 0.19 kg |
Type | Mass Air Flow Sensor |
Resistor Type | Hot-wire Sensor |
Function | Mass Air Flow Sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Oil Pump |
Weight | 1.275 kg |
Type | Oil Pump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.81 kg |
Length | 157 mm |
Thickness | 95 mm |
Number of Holes | 5 |
Bolt Hole Circle Diameter | 130 mm |
Function | Wheel Hub |
Type | Wheel Hub |
Additional Information 2 | without wheel bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Lower |
Material | Cast Steel |
Steering arm type | Control Arm |
Paired article numbers | 37349 |
Bolt Head Diameter | 17 mm |
Function | Control/Trailing Arm, wheel suspension |
External Thread Size | M12 x 1,25, M14 x 1,5 |
Weight | 5.31 kg |
Type | Control/Trailing Arm, wheel suspension |
Additional Information | with rubber mounts, with holders |
Additional Information 2 | with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 8.7 kg |
Placement on Vehicle | Rear Axle Left, Lower, Rear Axle Right |
Length | 568 mm |
Steering arm type | Trailing Arm |
Paired article numbers | 39693 |
Rod/Strut | Guide Rod |
Pipe Diameter | 46 mm |
Mounting points diameter | 17 mm |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Hole Spacing | 115 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Mounting, engine |
Placement on Vehicle | Rear |
Weight | 2.524 kg |
Bearing/Mounting Type | Rubber-Metal Mount |
Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 384 mm |
Filter type | with water separator, without filter heating |
Weight | 1.9 kg |
Type | Housing, fuel filter |
Function | Housing, fuel filter |
Internal Thread Size | M16 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Hand Feed Pump (176223)
- 1x Febi Fuel filter (29454)
- 1x Febi Water Separator, fuel system (103284)
Important compatibility info
Function | Brake Caliper |
Brake Caliper Type | Brake Caliper (1 piston) |
Placement on Vehicle | Rear Axle Right |
Additional Information | with electric motor |
Material | Cast Iron |
Vehicle Equipment | for vehicles with electric parking brake |
Weight | 3.0 kg |
Paired article numbers | 183210 |
Brake caliper piston diameter | 41 mm |
Type | Brake Caliper |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left |
Additional Information | with rubber mounts |
Material | Aluminium |
Additional Information 2 | with ball joint |
Steering arm type | Control Arm |
Paired article numbers | 197245 |
Weight | 3.709 kg |
Cone Size | 13.7 mm |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Cone Size 2 | 15.2 mm |
External Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Wings | 12 |
Seal Material | Rubber |
Water pump impeller material | Grey Cast Iron |
Function | Water Pump, engine cooling |
Material | Grey Cast Iron |
Weight | 10.1 kg |
Type | Water Pump, engine cooling |
Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.100 kg |
Number of Connectors / Ports | 3 |
Type | Sensor, engine oil level |
Function | Sensor, engine oil level |
Extra Description | febi Plus |
Additional Information 2 | with seal ring |
Replaces | 40787 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.46 kg |
Function | Joint, propshaft |
Bolt Hole Circle Diameter | 105 mm |
Placement on Vehicle | Rear |
Extra Description | ProKit |
Type | Joint, propshaft |
Additional Information | with nuts |
Additional Information 2 | with bolts/screws |
Number of Holes | 6 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Joint, propshaft (26294)
- 1x Febi Assembly Kit, propshaft joint (43515)
Important compatibility info
Weight | 0.56 kg |
Width | 24 mm |
Number of Teeth | 82 |
Surface | Coated |
Function | Timing Belt Kit |
Type | Timing Belt Kit |
Belts | with rounded tooth profile |
Units / Pulleys | incl. tensioner pulley, incl. deflection pulley |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt (43483)
- 1x Febi Tensioner Pulley, timing belt (30221)
- 1x Febi Deflection Pulley/Guide Pulley, timing belt (07022)
Important compatibility info
Width | 40.6 mm |
Outer diameter | 54 mm |
Inner diameter | 17 mm |
Number of Ribs | 6 |
Tightening Torque | 85 Nm |
Function | Alternator Freewheel Clutch |
Weight | 0.458 kg |
Additional Information 2 | with lid |
Type | Alternator Freewheel Clutch |
Additional Information
Technical Information
Depending on fitted component and/or vehicle specification the use of a special tool can be necessary
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle, outer |
Colour | Green |
Function | Stabiliser Bar, suspension |
Stabiliser Diameter | 22.5 mm |
Type | Stabiliser Bar, suspension |
Weight | 4.773 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Right |
Weight | 1.550 kg |
Bearing/Mounting Type | Hydro Mount |
Type | Mounting, engine |
Function | Mounting, engine |
for OE number | 3Q0 199 262 N |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023