Proud to be a UK-based company
Contact us
Important compatibility info
| Weight | 1.111 kg |
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 132 |
| Type | Timing Chain Kit |
| Function | Timing Chain Kit |
| Timing Chain Size | G68HR |
| Extra Description | Basic Short Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (40428)
- 1x Febi Tensioner, timing chain (46511)
- 1x Febi Guide, timing chain (104078)
- 1x Febi Guide, timing chain (46773)
- 1x Febi Guide, timing chain (105999)
- 1x Febi Guide, timing chain (105998)
£98.94
Important compatibility info
| Number of Ribs | 5 |
| Parameter | 6PK |
| Width | 85 mm |
| Outer diameter | 192 mm |
| Inner diameter | 32 mm |
| Function | Belt Pulley, crankshaft |
| Weight | 2.6 kg |
| Extra Description | ProKit |
| Type | Belt Pulley, crankshaft |
| Additional Information 2 | with spacer disc, with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Belt Pulley, crankshaft (29990)
- 1x Febi Washer, crankshaft pulley (33599)
- 1x Febi Centering Bolt, crankshaft pulley (33601)
£98.94
Important compatibility info
| Material | Plastic |
| Number of Connectors / Ports | 3 |
| Weight | 0.150 kg |
| Function | Mass Air Flow Sensor |
| Resistor Type | Hot-film Sensor |
| Housing Type | with housing |
| Type | Mass Air Flow Sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£98.92
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Additional Information 2 | with nut |
| Thread Size | M28x1,5 |
| External Teeth, Wheel Side | 28 |
| Weight | 9.070 kg |
| External Teeth, Diff.Side | 41 |
| Min. Length | 759 mm |
| Wheel Sided Joint Diameter | 98 mm |
| Transmission-side joint diameter | 89 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£98.91
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Weight | 12.0 kg |
| Rotor Style | Internally Vented |
| Placement on Vehicle | Front Axle |
| Outer diameter | 345 mm |
| Thickness | 48 mm |
| Brake Disc Thickness | 30 mm |
| Minimum thickness | 27.5 mm |
| Bolt Hole Circle Diameter | 108 mm |
| Centering Diameter | 63 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£98.90
Important compatibility info
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Weight | 2.127 kg |
| Type | Mounting, engine |
| for OE number | 21810-2S700 |
| Placement on Vehicle | Right, Lower |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£98.87
Important compatibility info
| Weight | 11.956 kg |
| Number of mounting bores | 2 |
| External Teeth, Diff.Side | 29 |
| Placement on Vehicle | Front Axle Right |
| Additional Information | with Split Pin |
| Additional Information 2 | with nut |
| Thread Size | M24.1,5 |
| Bolt Hole Circle Diameter | 131.3 mm |
| Bore Diameter | 11.3 mm |
| External Teeth, Wheel Side | 29 |
| Paired article numbers | 183462 |
| Type | Drive Shaft |
| Transmission-side joint diameter | 90 mm |
| Wheel Sided Joint Diameter | 98 mm |
| Function | Drive Shaft |
| Min. Length | 982 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£98.79
Important compatibility info
| External Thread Size | M14 x 1,5 |
| Weight | 3.9 kg |
| Placement on Vehicle | Rear |
| Operating Mode | Mechanical |
| Min. Length | 352 mm |
| Pipe Diameter | 45 mm |
| Mounting points diameter | 12 mm |
| Piston conrod diameter | 20 mm |
| Type | Shock Absorber, driver cab suspension |
| Function | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£98.79
Important compatibility info
| Additional Information 2 | with crown nut |
| Extra Description | ProKit |
| Function | Tie Rod |
| Type | Tie Rod |
| Pipe Diameter | 50 mm |
| Cone Size | 26 mm |
| Thickness | 103 mm |
| Outer diameter | 50 mm |
| Placement on Vehicle | Front Axle |
| Width | 50 mm |
| Weight | 13.0 kg |
| External Thread Size | M20 x 1,5 |
| Internal Thread Size | M30 x 1,5 RHT |
| Length | 1650 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£98.79
Important compatibility info
| Function | Starter |
| Number of Teeth | 11 |
| Rated Power | 2.2 kW |
| Voltage | 12 V |
| Weight | 3.62 kg |
| Type | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£98.79
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023