Important compatibility info
Internal Teeth, wheel side | 25 |
Type | Joint Kit, drive shaft |
Length | 154 mm |
External Teeth, Wheel Side | 27 |
Technical Information Number | Middle groove |
Number of Teeth, ABS ring | 48 |
Seal Diameter | 62 mm |
Function | Joint Kit, drive shaft |
Thread Size | M22X1.5 |
Additional Information 2 | with groove |
Important compatibility info
Function | Cable Pull, manual transmission |
Length 1 | 1160 mm |
Length 4 | 879 mm |
Length 3 | 1202 mm |
Length 2 | 855 mm |
Type | Cable Pull, manual transmission |
Important compatibility info
Thread Size | M22X1,5 |
External Teeth, Wheel Side | 30 |
Seal Diameter | 61.4 mm |
Internal Teeth, wheel side | 36 |
Type | Joint Kit, drive shaft |
Length | 163 mm |
Function | Joint Kit, drive shaft |
Additional Information 2 | with groove |
Placement on Vehicle | Front Axle Left, Front Axle Right, Wheel Side |
Important compatibility info
Length 1 | 1185 mm |
Function | Cable Pull, parking brake |
Type | Cable Pull, parking brake |
Placement on Vehicle | Left Rear, Right Rear |
Important compatibility info
Function | Tie Rod End |
Type | Tie Rod End |
Placement on Vehicle | Front Axle Left |
Thread Measurement 2 | M14x1.5 |
Thread Measurement 1 | M10x1.5 |
Length | 135 mm |
Important compatibility info
Length | 793 mm |
Function | Drive Shaft |
External Teeth, Diff.Side | 27 |
External Teeth, Wheel Side | 28 |
Type | Drive Shaft |
Important compatibility info
External Teeth, Wheel Side | 22 |
Diameter 2 | 94 mm |
Function | Drive Shaft |
Type | Drive Shaft |
Length | 751 mm |
Additional Information
- 1x Borg & Beck Joint Kit, drive shaft (BCJ1249)
Important compatibility info
Length 1 | 1448 mm |
Function | Cable Pull, parking brake |
Type | Cable Pull, parking brake |
Placement on Vehicle | Right Rear |
Replaces | BKB2883 |
Important compatibility info
Pressure | 7 psi |
Material | Metal |
Function | Cap, radiator |
Type | Cap, radiator |
Height | 30 mm |
Diameter | 59 mm |
Important compatibility info
Placement on Vehicle | Front Axle Left, Front Axle Right |
Inner diameter 1 | 71 mm |
Inner diameter 2 | 60 mm |
Function | Bellow Kit, steering |
Length | 450 mm |
Type | Bellow Kit, steering |
Additional Information 2 | with clamps |
Material | Rubber |
Important compatibility info
Type | Warning Contact, brake pad wear |
Function | Warning Contact, brake pad wear |
Length | 1304 mm |
Required quantity | 1 |
Placement on Vehicle | Front Axle |
Important compatibility info
Inner diameter | 16.5 mm |
Diameter | 54.5 mm |
Length | 62.2 mm |
Function | Mounting, control/trailing arm |
Type | Mounting, control/trailing arm |
Paired article numbers | FSK6857 |
Placement on Vehicle | Front Axle, Left, Right, Rear |
Important compatibility info
Placement on Vehicle | Front Axle |
Inner diameter | 22 mm |
Function | Repair Kit, stabiliser coupling rod |
Type | Repair Kit, stabiliser coupling rod |
Important compatibility info
Inner diameter | 10.2 mm |
Diameter | 46.1 mm |
Length | 45 mm |
Function | Mounting, control/trailing arm |
Type | Mounting, control/trailing arm |
Paired article numbers | FSK7931 |
Important compatibility info
Additional Information 2 | with bearing |
Function | Suspension Strut Support Mount |
Paired article numbers | FSM5410 |
Inner diameter | 12 mm |
Type | Suspension Strut Support Mount |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Additional Information
- 1x Borg & Beck Suspension Strut Support Mount (BSM5381)
- 1x Borg & Beck Rolling Bearing, suspension strut support mount (BSM5386)
Important compatibility info
Type | Brake Hose |
Additional Information | with banjo fitting |
Function | Brake Hose |
Length | 540 mm |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Thread Type | with internal thread |
Mounting Bolt Thread Size | M10x1.5 |
Thread Size | M10x1.5 |
Additional Information 2 | with banjo bolt |
Important compatibility info
Placement on Vehicle | Right, Lower, Front |
Colour | Black |
Inner diameter 2 | 25 mm |
Inner diameter 1 | 48 mm |
Material | Silicone |
Function | Charge Air Hose |
Type | Charge Air Hose |
Additional Information
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1001S)
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1003S)
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1100S)
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1106S)
Important compatibility info
Inner diameter 1 | 41 mm |
Colour | Black |
Material | Silicone |
Function | Charge Air Hose |
Type | Charge Air Hose |
Inner diameter 2 | 41 mm |
Important compatibility info
Inner diameter 2 | 50 mm |
Function | Charge Air Hose |
Material | Polychloroprene (Neoprene) |
Inner diameter 1 | 50 mm |
Colour | Black |
Replaced by | BTH1555 |
Type | Charge Air Hose |
Important compatibility info
Pipe Diameter | 62 mm |
Type | Centre Rod Assembly |
Length | 2179 mm |
Rod/Strut | Push Rod |
Function | Centre Rod Assembly |






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023