Important compatibility info
Placement on Vehicle | Rear Axle Left |
Bearing Code | Gen 2 |
Function | Wheel Bearing Kit |
Type | Wheel Bearing Kit |
Important compatibility info
Function | Control/Trailing Arm, wheel suspension |
Steering arm type | Control Arm |
Type | Control/Trailing Arm, wheel suspension |
Paired article numbers | FCA6377 |
Important compatibility info
Bearing Code | Gen 3 |
Function | Wheel Bearing Kit |
Type | Wheel Bearing Kit |
Outer diameter 1 | 138 mm |
Width 1 | 77 mm |
Outer diameter 2 | 84 mm |
Placement on Vehicle | Front Axle |
Important compatibility info
Outer diameter 1 | 137 mm |
Placement on Vehicle | Rear Axle |
Bearing Code | Gen 3 |
Additional Information 2 | with integrated ABS sensor |
Function | Wheel Bearing Kit |
Type | Wheel Bearing Kit |
Important compatibility info
Function | Thermostat, coolant |
Housing Type | without housing |
Opening Temperature | 82 °C |
Type | Thermostat, coolant |
Additional Information | with gaskets/seals |
Important compatibility info
Rotor Style | Solid |
Number of Holes | 5 |
Outer diameter | 284 mm |
Minimum thickness | 8.5 mm |
Centering Diameter | 76 mm |
Brake Disc Thickness | 10 mm |
Height | 54.3 mm |
Function | Brake Disc |
Quantity Unit | Set |
Surface | Coated |
Type | Brake Disc Rotor |
Placement on Vehicle | Rear Axle |
Number of mounting bores | 3 |
Important compatibility info
Number of Teeth | 14 |
Hub Profile | 18.3 x 15.7 |
Outer diameter | 200 mm |
Function | Clutch Kit |
Number of Parts | 2 -part |
Type | Clutch Kit |
Important compatibility info
Rotor Style | Vented |
Outer diameter | 258 mm |
Quantity Unit | Set |
Brake Disc Thickness | 22 mm |
Height | 43.9 mm |
Number of Holes | 4 |
Minimum thickness | 19.8 mm |
Centering Diameter | 61 mm |
Function | Brake Disc |
Surface | Coated |
Type | Brake Disc Rotor |
Placement on Vehicle | Front Axle |
Number of mounting bores | 2 |
Important compatibility info
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Inner diameter 1 | 48 mm |
Colour | Black |
Inner diameter 2 | 48 mm |
Function | Charge Air Hose |
Type | Charge Air Hose |
Additional Information
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1003S)
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1107S)
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1108S)
Important compatibility info
Bearing Code | Gen 3 |
Additional Information 2 | with integrated ABS sensor |
Inner diameter 1 | 40 mm |
Outer diameter 1 | 79 mm |
Only in connection with | BHN211, FHN211 |
Width 1 | 62 mm |
Function | Wheel Bearing Kit |
Type | Wheel Bearing Kit |
Placement on Vehicle | Front Axle |
Important compatibility info
Number of Parts | 3 -part |
Hub Profile | 21.9 x 20.1 |
Outer diameter | 181 mm |
Function | Clutch Kit |
Number of Teeth | 26 |
Type | Clutch Kit |
Important compatibility info
Int. teeth, diff.side, conn.to transm. | 28 |
Function | Joint Kit, drive shaft |
Length | 139 mm |
Type | Joint Kit, drive shaft |
Seal Diameter | 65 mm |
External Teeth, Diff.Side | 30 |
Important compatibility info
Function | Water Pump, engine cooling |
Additional Information | with gaskets/seals |
Type | Water Pump, engine cooling |
Replaced by | BWP2015 |
Important compatibility info
Type | Joint Kit, drive shaft |
Placement on Vehicle | Front Axle Left, Wheel Side |
Function | Joint Kit, drive shaft |
Important compatibility info
Technical Information Number | Middle groove |
Length | 143 mm |
Function | Joint Kit, drive shaft |
Internal Teeth, wheel side | 20 |
Thread Size | M18X1,5 |
Type | Joint Kit, drive shaft |
Seal Diameter | 49 mm |
External Teeth, Wheel Side | 25 |
Additional Information 2 | with groove |
Important compatibility info
Placement on Vehicle | Rear, Left, Lower |
Material | AEM (Ethylene Acrylate Rubber) |
Colour | Black |
Port / Connector type | OE PUSH CONNECTOR |
Function | Charge Air Hose |
Type | Charge Air Hose |
Inner diameter 2 | 48 mm |
Inner diameter 1 | 48 mm |
Replaces | BTH1089 |
Additional Information
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC2005S)
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC2004S)
Important compatibility info
Function | Control/Trailing Arm, wheel suspension |
Steering arm type | Control Arm |
Type | Control/Trailing Arm, wheel suspension |
Paired article numbers | FCA5869 |
Placement on Vehicle | Front Axle Left |
Additional Information
- 1x Borg & Beck Mounting, control/trailing arm (BSK6143)
- 1x Borg & Beck Mounting, control/trailing arm (BSK6144)
Important compatibility info
Additional Information | with gaskets/seals |
Function | Water Pump, engine cooling |
Type | Water Pump, engine cooling |
Important compatibility info
Housing Type | with housing |
Function | Thermostat, coolant |
Opening Temperature | 105 °C |
Type | Thermostat, coolant |
Important compatibility info
Rotor Style | Vented |
Outer diameter | 290 mm |
Function | Brake Disc |
Quantity Unit | Set |
Centering Diameter | 58 mm |
Minimum thickness | 16.0 mm |
Number of Holes | 5 |
Brake Disc Thickness | 18 mm |
Height | 64 mm |
Surface | Coated |
Type | Brake Disc Rotor |
Placement on Vehicle | Rear Axle |
Number of mounting bores | 3 |






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023