Proud to be a UK-based company
Contact us
Important compatibility info
| Type | Fuel Filter |
| Housing material | Plastic |
| Function | Fuel Filter |
| Weight | 0.69 kg |
| Additional Information | with holder |
| Width | 140 mm |
| Height | 229 mm |
| Length | 140 mm |
| Filter type | In-Line Filter, with water drain screw, with connection for water sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£89.38
Important compatibility info
| for OE number | 2 515 232 |
| Placement on Vehicle | Rear |
| Weight | 1.615 kg |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£89.29
Important compatibility info
| Paired article numbers | 100157 |
| Function | Mounting, manual transmission |
| Type | Mounting, manual transmission |
| Placement on Vehicle | Left, Upper |
| Weight | 2.534 kg |
| Bearing/Mounting Type | Rubber-Metal Mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£89.26
Important compatibility info
| Additional Information | with holder |
| Filter type | with housing cover |
| Weight | 0.93 kg |
| Type | Cover, fuel filter |
| Function | Cover, fuel filter |
| External Thread Size | 1" - 14 UNF, M16 x 1,5, M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£89.23
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Additional Information 2 | with screw |
| Thread Size | M10x1,5 |
| External Teeth, Wheel Side | 36 |
| Weight | 6.270 kg |
| External Teeth, Diff.Side | 26 |
| Min. Length | 520 mm |
| Wheel Sided Joint Diameter | 91 mm |
| Transmission-side joint diameter | 85 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£89.13
Important compatibility info
| Weight | 1.049 kg |
| Number of Teeth | 145 |
| Belts | with rounded tooth profile |
| Function | Timing Belt Kit |
| Width of castor bearing surface | 25 mm |
| Belt Material | HNBR (hydrogenated nitrile butadiene rubber) |
| Type | Timing Belt Kit |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt (48289)
- 1x Febi Tensioner Pulley, timing belt (47604)
- 1x Febi Deflection Pulley/Guide Pulley, timing belt (07022)
- 1x Febi Deflection Pulley/Guide Pulley, timing belt (37019)
- 1x Febi Mounting Set, tension/deflection pulley (timing belt) (181517)
£89.13
Important compatibility info
| for OE number | 55206898 |
| Weight | 1.516 kg |
| Placement on Vehicle | Intake Side |
| Function | Camshaft |
| Type | Camshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£89.12
Important compatibility info
| Type | Camshaft |
| for OE number | 55206897 |
| Weight | 1.644 kg |
| Function | Camshaft |
| Placement on Vehicle | Exhaust Side |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£89.12
Important compatibility info
| Placement on Vehicle | Rear Axle Left |
| Material | Aluminium |
| Brake Caliper Type | Brake Caliper (2 pistons) |
| Paired article numbers | 193946 |
| Colour | black |
| Weight | 1.970 kg |
| Type | Brake Caliper |
| Function | Brake Caliper |
| Brake caliper piston diameter | 34 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£89.11
Important compatibility info
| Placement on Vehicle | Rear Axle Right |
| Material | Aluminium |
| Brake Caliper Type | Brake Caliper (2 pistons) |
| Paired article numbers | 193945 |
| Colour | black |
| Weight | 1.970 kg |
| Type | Brake Caliper |
| Function | Brake Caliper |
| Brake caliper piston diameter | 34 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£89.11
Important compatibility info
| Weight | 10.00 kg |
| Length | 714.5 mm |
| Material | Steel |
| Outer diameter | 246 mm |
| Capacity | 30 l |
| Operating Pressure | 15.5 bar |
| Function | Air Tank, compressed-air system |
| Internal Thread Size | M22 x 1,5 |
| Number of Connectors / Ports | 4 |
| Type | Air Tank, compressed-air system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£89.06
Important compatibility info
| Function | Air Tank, compressed-air system |
| Material | Steel |
| Outer diameter | 276 mm |
| Internal Thread Size | M22 x 1,5 |
| Capacity | 30 l |
| Operating Pressure | 15.5 bar |
| Length | 584 mm |
| Weight | 9.84 kg |
| Type | Air Tank, compressed-air system |
| Number of Connectors / Ports | 4 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£89.05
Important compatibility info
| for OE number | 11 36 7 583 820 |
| Weight | 0.110 kg |
| Function | Control Valve, camshaft adjustment |
| Spanner Size | 24 |
| Length | 80 mm |
| Extra Description | febi Plus |
| External Thread Size | M14 x 1,25 |
| Type | Control Valve, camshaft adjustment |
| Placement on Vehicle | Intake Side, Exhaust Side |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£89.05
Important compatibility info
| Outer diameter | 310 mm. 254 mm |
| Type | Bellow, air suspension |
| Function | Bellow, air suspension |
| Weight | 13.6 kg |
| Thickness | 715 mm. 415 mm |
| Rolling piston material | Plastic |
| External Thread Size | M22 x 1,5, M12 x 1,75, M16 x 2 |
| Additional Information | with piston |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£89.05
Important compatibility info
| Weight | 12.06 kg |
| Placement on Vehicle | Front Axle |
| Outer diameter | 360 mm |
| Thickness | 62.1 mm |
| Brake Disc Thickness | 30 mm |
| Machining | High-carbon |
| Number of mounting bores | 2 |
| Rotor Style | Internally Vented |
| Surface | Coated |
| Function | Brake Disc |
| Bolt Hole Circle Diameter | 120 mm |
| Minimum thickness | 27 mm |
| Centering Diameter | 79 mm |
| Rim Hole Number | 5 -Hole |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£88.96
Important compatibility info
| Weight | 6.925 kg |
| Placement on Vehicle | Front Axle |
| Length | 710 mm |
| Outer diameter | 42 mm |
| Thickness | 122 mm |
| Rod/Strut | Push Rod |
| Cone Size | 32 mm |
| Function | Centre Rod Assembly |
| External Thread Size | M27 x 1,5 |
| Extra Description | ProKit |
| Type | Centre Rod Assembly |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£88.95
Important compatibility info
| Weight | 5.02 kg |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 235 mm |
| Outer diameter | 50 mm |
| Function | Repair Kit, kingpin |
| Extra Description | ProKit |
| Type | Repair Kit, kingpin |
| Additional Information 2 | with slide bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Kingpin (28399)
£88.95
Important compatibility info
| Function | Sensor, fuel pressure |
| Weight | 0.054 kg |
| Type | Sensor, fuel pressure |
| Number of Connectors / Ports | 3 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£88.95
Important compatibility info
| Function | Wiper Motor |
| Placement on Vehicle | Rear |
| Voltage | 12 V |
| Weight | 0.899 kg |
| Type | Wiper Motor |
| Number of Connectors / Ports | 4 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£88.94
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Width | 42 mm |
| Additional Information | with wheel brake cylinder, with accessories, with fastening/mounting material |
| Outer diameter | 228.6 mm |
| Inspection Tag | ECE R90 Approved |
| Weight | 3.41 kg |
| Mounting Type | Pre-assembled |
| Type | Brake Shoe Set |
| Function | Brake Shoe Set |
| Piston Diameter | 20.6 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£88.90
Important compatibility info
| Rod/Strut | Pull Rod |
| Weight | 2.89 kg |
| Placement on Vehicle | Front Axle Left, Lower, Front |
| Material | Aluminium |
| Inner diameter | 14 mm |
| Steering arm type | Control Arm |
| Paired article numbers | 38272 |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information | with lock nut, with hydro mount |
| External Thread Size | M16 x 1,5 |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Cone Size | 19 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Mounting, control/trailing arm (38393)
- 1x Febi Nut (39976)
£88.90
Important compatibility info
| Weight | 11.85 kg |
| Placement on Vehicle | Front Axle |
| Function | Tie Rod |
| Type | Tie Rod |
| Extra Description | ProKit |
| External Thread Size | M24 x 1,5 |
| Internal Thread Size | M30 x 1,5 LHT |
| Pipe Diameter | 40 mm |
| Cone Size | 30 mm |
| Additional Information 2 | with crown nut |
| Outer diameter | 40 mm |
| Length | 1736 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£88.89
Important compatibility info
| for OE number | 18011-RNA-A00 |
| Weight | 0.825 kg |
| Additional Information | with gasket/seal |
| Number of Connectors / Ports | 5 |
| Type | EGR Valve |
| Function | EGR Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£88.89
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 1340 mm |
| Rod/Strut | Push Rod |
| Function | Centre Rod Assembly |
| Internal Thread Size | M30 x 1,5 |
| External Thread Size | M20 x 1,5 |
| Cone Size | 26 mm |
| Adjustable | Adjustable on one side |
| Pipe Diameter | 40 mm |
| Weight | 13.6 kg |
| Type | Centre Rod Assembly |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£88.89
Important compatibility info
| Extra Description | ProKit |
| Function | Tie Rod |
| Cone Size | 26 mm |
| Additional Information 2 | with crown nut |
| Outer diameter | 40 mm |
| Length | 1562 mm |
| Weight | 9.01 kg |
| External Thread Size | M20 x 1,5, M30 x 1,5 |
| Type | Tie Rod |
| Thickness | 5.7 mm |
| Placement on Vehicle | Front Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£88.89
Important compatibility info
| Weight | 0.883 kg |
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 142 |
| Timing Chain Size | G53HP, G53HR |
| Function | Timing Chain Kit |
| Extra Description | Basic Short Kit |
| Type | Timing Chain Kit |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (29868)
- 1x Febi Tensioner, timing chain (26751)
- 1x Febi Guide, timing chain (24287)
- 1x Febi Guide, timing chain (24286)
- 1x Febi Holder, timing chain tensioner (38015)
- 1x Febi Lock Cover, timing chain tensioner (mounting hole) (38327)
£88.89
Important compatibility info
| Additional Information | with piston |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 259 mm. 180 mm |
| Thickness | 280 mm. 130 mm |
| Function | Bellow, air suspension |
| Weight | 10.0 kg |
| External Thread Size | M12 x 1,5, M16 x 1,5, M18 x 2 |
| Type | Bellow, air suspension |
| Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£88.89
Important compatibility info
| Mounting points diameter | 9.2 mm |
| Piston conrod diameter | 14 mm |
| Function | Shock Absorber, driver cab suspension |
| Placement on Vehicle | Left Rear, Right Rear |
| Operating Mode | Mechanical |
| Shock Absorber Mounting Type | Top pin, Bottom Yoke |
| Max. Length | 363 mm |
| Min. Length | 315 mm |
| Pipe Diameter | 92 mm. 45 mm |
| Hole Spacing | 94 mm |
| External Thread Size | M12 x 1,5 |
| Type | Shock Absorber, driver cab suspension |
| Weight | 4.23 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£88.89
Important compatibility info
| Type | Electric Motor, window regulator |
| Weight | 0.6 kg |
| Additional Information 2 | with bolts/screws |
| Number of Connectors / Ports | 6 |
| Placement on Vehicle | Left |
| Function | Electric Motor, window regulator |
| Paired article numbers | 179337 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£88.89
Important compatibility info
| Weight | 2.130 kg |
| Placement on Vehicle | Lower Front Axle, Left |
| Material | Aluminium |
| Steering arm type | Control Arm |
| Paired article numbers | 21740 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with lock nut |
| Additional Information 2 | with ball joint, with bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Mounting, control/trailing arm (21735)
£88.89
Important compatibility info
| Type | Drive Shaft |
| Transmission-side joint diameter | 81 mm |
| Wheel Sided Joint Diameter | 91 mm |
| Min. Length | 960 mm |
| Thread Size | M10x1,5 |
| External Teeth, Wheel Side | 36 |
| Weight | 8.074 kg |
| External Teeth, Diff.Side | 26 |
| Placement on Vehicle | Front Axle Right |
| Additional Information 2 | with screw |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£88.89
Important compatibility info
| External Thread Size | M10 |
| Wet Sump Material | Sheet Steel |
| Length | 550 mm |
| Height | 285 mm |
| Width | 205 mm |
| Colour | Black |
| Type | Oil sump |
| Function | Oil sump |
| Weight | 3.50 kg |
| Additional Information | with oil drain plug |
| Additional Information 2 | with seal ring |
| Spanner Size | 22 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£88.89
Important compatibility info
| Function | Belt Tensioner, V-ribbed belt |
| Type | Belt Tensioner, V-ribbed belt |
| Weight | 1.463 kg |
| Operating Mode | Automatic |
| Material | Metal |
| Width | 86 mm |
| Outer diameter | 75 mm |
| Width of castor bearing surface | 32 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£88.89
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 893 mm |
| Additional Information 2 | with crown nut |
| Internal Thread Size | M24 x 1,5 |
| Cone Size | 30 mm |
| Adjustable | Adjustable on one side |
| Type | Centre Rod Assembly |
| Extra Description | ProKit |
| Function | Centre Rod Assembly |
| Diameter 1 | 56 mm |
| Rod/Strut | Push Rod |
| Weight | 13.250 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£88.89
Important compatibility info
| External Thread Size | M24 x 1,5 |
| Weight | 8.154 kg |
| Placement on Vehicle | Front Axle |
| Length | 855 mm |
| Rod/Strut | Push Rod |
| Thread Type | with right-hand thread |
| Cone Size | 30 mm |
| Pipe Diameter | 52 mm |
| Function | Centre Rod Assembly |
| Internal Thread Size | M30 x 1,5 RHT |
| Extra Description | ProKit |
| Type | Centre Rod Assembly |
| Additional Information | with castellated nut and split pins |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£88.89
Important compatibility info
| Function | Clutch Release Bearing |
| Weight | 2.989 kg |
| Type | Clutch Release Bearing |
| Additional Information 2 | with mounting kit |
| for OE number | 20571928 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£88.89
Important compatibility info
| Type | Electric Motor, window regulator |
| Weight | 0.6 kg |
| Function | Electric Motor, window regulator |
| Number of Connectors / Ports | 6 |
| Paired article numbers | 179338 |
| Placement on Vehicle | Right |
| Additional Information 2 | with bolts/screws |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£88.89
Important compatibility info
| Rod/Strut | Push Rod |
| Weight | 5.81 kg |
| Cone Size | 32 mm |
| Pipe Diameter | 36 mm |
| Function | Centre Rod Assembly |
| Length | 733 mm |
| Extra Description | ProKit |
| Internal Thread Size | M30 x 1,5 RHT, M30 x 1,5 LHT |
| External Thread Size | M27 x 1,5 |
| Type | Centre Rod Assembly |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£88.89
Important compatibility info
| Additional Information | with fastening/mounting material, without electric motor |
| Placement on Vehicle | Left Rear |
| Operating Mode | Electric |
| Paired article numbers | 179231 |
| Weight | 0.86 kg |
| Type | Window Regulator |
| Function | Window Regulator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£88.89
Important compatibility info
| Placement on Vehicle | Rear |
| Mounting points diameter | 20 mm |
| Piston conrod diameter | 13 mm |
| Function | Shock Absorber, driver cab suspension |
| Operating Mode | Pneumatic |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 329 mm |
| Min. Length | 253 mm |
| Pipe Diameter | 44 mm. 53 mm |
| External Thread Size | M10 x 1 |
| Weight | 2.5 kg |
| Type | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£88.89
Important compatibility info
| Weight | 1.296 kg |
| Voltage | 24 V |
| Number of Connectors / Ports | 5 |
| Additional Information 2 | with bolts/screws, with nut, with cable |
| Type | Wiper Motor |
| Function | Wiper Motor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£88.89
Important compatibility info
| Voltage | 12 V |
| Number of Teeth | 11 |
| Rated Power | 1.5 kW |
| Weight | 3.13 kg |
| Type | Starter |
| Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£88.89
Important compatibility info
| External Thread Size | M10 x 1 |
| Operating Mode | Pneumatic |
| Weight | 3.15 kg |
| Min. Length | 279 mm |
| Pipe Diameter | 96 mm |
| Function | Shock Absorber, driver cab suspension |
| Type | Shock Absorber, driver cab suspension |
| Shock Absorber Mounting Type | Bottom eye, Top eye |
| Piston conrod diameter | 13 mm |
| Mounting points diameter | 12 mm |
| Placement on Vehicle | Front |
| Max. Length | 377 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£88.89
Important compatibility info
| Thread Size | M22x1,5 |
| External Teeth, Diff.Side | 34 |
| Transmission-side joint diameter | 79 mm |
| Weight | 5.554 kg |
| Min. Length | 591 mm |
| External Teeth, Wheel Side | 26 |
| Additional Information 2 | with nut |
| Wheel Sided Joint Diameter | 82.1 mm |
| Function | Drive Shaft |
| Type | Drive Shaft |
| Placement on Vehicle | Front Axle Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£88.89
Important compatibility info
| Function | Repair Kit, kingpin |
| Length | 225 mm |
| Outer diameter | 50 mm |
| Type | Repair Kit, kingpin |
| Weight | 4.680 kg |
| Placement on Vehicle | both sides |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Kingpin (32432)
- 2x Febi Seal Ring, steering knuckle (28398)
- 1x Febi Bush, kingpin (28397)
- 2x Febi Seal Ring, steering knuckle (32434)
- 2x Febi Circlip (05370)
- 2x Febi Bush, steering knuckle (08524)
- 1x Febi Nut (32433)
- 1x Febi Spacer, kingpin (32436)
- 1x Febi Screw (32435)
- 1x Febi Grease Nipple (04187)
- 1x Febi Bush, steering knuckle (28396)
- 1x Febi Lock Ring, steering knuckle (28395)
- 1x Febi Lock Ring, steering knuckle (28394)
£88.89
Important compatibility info
| Function | Clutch Release Bearing |
| Weight | 3.446 kg |
| Type | Clutch Release Bearing |
| Additional Information 2 | with mounting kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Clutch Release Bearing (105416)
- 1x Febi Repair Kit, clutch release bearing (105270)
£88.89
Important compatibility info
| Material | Sheet Steel |
| Placement on Vehicle | Front Axle Right |
| Additional Information | with rubber mounts |
| Additional Information 2 | with ball joint |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Cone Size | 18 mm |
| Weight | 2.762 kg |
| Paired article numbers | 181408 |
| Steering arm type | Control Arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£88.89
Important compatibility info
| Rated Power | 1.7 kW |
| Type | Starter |
| Weight | 3.7 kg |
| Voltage | 12 V |
| Function | Starter |
| Number of Teeth | 12 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£88.89
Important compatibility info
| Extra Description | ProKit |
| Placement on Vehicle | Front Axle |
| Length | 895 mm |
| Additional Information 2 | with crown nut |
| Rod/Strut | Push Rod |
| Weight | 5.550 kg |
| Cone Size | 22 mm |
| Pipe Diameter | 38 mm |
| Type | Centre Rod Assembly |
| Function | Centre Rod Assembly |
| External Thread Size | M18 x 1,5, M30 x 1,5 LHT |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£88.89
Important compatibility info
| Placement on Vehicle | Upper Left |
| Paired article numbers | 173816 |
| Weight | 2.408 kg |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, automatic transmission |
| Function | Mounting, automatic transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£88.86
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023