Proud to be a UK-based company
Contact us
Important compatibility info
| Weight | 2.982 kg |
| Placement on Vehicle | Front Axle |
| Length | 175 mm |
| Width | 79.3 mm |
| Wear Warning Contact | prepared for wear warning indicator |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 16.5 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
| Additional Information 2 | with bolts/screws |
| Model | DEFENDER DISCOVERY DISCOVERY SPORT E-PACE EVOQUE SPORT |
| Manufacturer | JAGUAR LAND ROVER RANGE ROVER |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.97
Important compatibility info
| Function | Clutch Release Bearing |
| Type | Clutch Release Bearing |
| for OE number | 02T 141 170 C |
| Additional Information 2 | with guide sleeve |
| Weight | 0.174 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.60
Important compatibility info
| Weight | 0.368 kg |
| Additional Information | with gasket/seal |
| Type | Thermostat Housing |
| Function | Thermostat Housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.31
Important compatibility info
| Weight | 1.85 kg |
| Placement on Vehicle | Front Axle |
| Length | 114.6 mm |
| Width | 91.4 mm |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 14.8 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
| Wear Warning Contact | prepared for wear warning indicator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£60.83
Important compatibility info
| Paired article numbers | 174778 |
| Cone Size | 23.7 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| External Thread Size | M16 x 1,5 |
| Placement on Vehicle | Front Axle Left, Lower, Front |
| Weight | 2.658 kg |
| Material | Aluminium |
| Additional Information 2 | with ball joint, with bearing |
| Steering arm type | Control Arm |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£65.13
Important compatibility info
| Weight | 0.176 kg |
| Material | Thermoplast |
| Placement on Vehicle | Wheel Side, Front Axle Left |
| Length | 88 mm |
| Inner diameter 1 | 28 mm |
| Paired article numbers | 175146 |
| Function | Bellow Kit, drive shaft |
| Inner diameter 2 | 86 mm |
| Joint Type | CV Joint |
| Type | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow Kit, drive shaft (174811)
- 1x Febi Molybdenum Grease (02582)
£16.02
Important compatibility info
| Weight | 0.08 kg |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Length | 330 mm |
| Function | Brake Hose |
| Internal Thread Size | M10 x 1 |
| External Thread Size | M10 x 1 |
| Type | Brake Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£9.80
Important compatibility info
| Weight | 0.39 kg |
| Placement on Vehicle | Lower, Left |
| Material | Rubber/Metal |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.95
Important compatibility info
| Placement on Vehicle | Front, both sides |
| Material | Rubber/Metal |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Replaces | 04692 |
| Weight | 0.792 kg |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£25.83
Important compatibility info
| Weight | 0.005 kg |
| Material | NBR (nitrile butadiene rubber) |
| Outer diameter | 71.8 mm |
| Thickness | 11 mm |
| Inner diameter | 55 mm |
| Function | Seal, oil filler neck cap |
| Type | Seal, oil filler neck cap |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£5.61
Important compatibility info
| External Thread Size | M12 x 1,25 |
| Weight | 0.38 kg |
| Placement on Vehicle | Front Axle Left |
| Length | 90 mm |
| Material | Steel |
| Spanner Size | 19 |
| Paired article numbers | 42988 |
| Rod/Strut | Coupling Rod |
| Colour | Silver |
| Function | Link/Coupling Rod, stabiliser bar |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.01
Important compatibility info
| Function | Sensor, wheel speed |
| Weight | 0.054 kg |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Number of Connectors / Ports | 2 |
| Cable Length | 1014 mm |
| Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£42.75
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Width | 37 mm |
| Outer diameter | 200 mm |
| Inspection Tag | ECE R90 Approved |
| Weight | 1.620 kg |
| Thickness/Strength 1 | 3 mm |
| Type | Brake Shoe Set, parking brake |
| Function | Brake Shoe Set, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.23
Important compatibility info
| Weight | 0.060 kg |
| Number of Connectors / Ports | 3 |
| Type | Sensor, exhaust pressure |
| Function | Sensor, exhaust pressure |
| for OE number | 009 153 51 28 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.85
Important compatibility info
| Combi Switch Function | Window Regulator |
| Number of Connectors / Ports | 5 |
| Placement on Vehicle | Passenger Side |
| Type | Multi-Function Switch |
| Function | Multi-Function Switch |
| Weight | 0.073 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£46.37
Important compatibility info
| Material | Rubber/Metal |
| Placement on Vehicle | Front Axle Right, Rear, Front Axle Left |
| Outer diameter | 61 mm |
| Thickness | 69 mm |
| Inner diameter | 12 mm |
| Weight | 0.270 kg |
| Type | Mounting, control/trailing arm |
| Function | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£12.98
Important compatibility info
| Bearing Type | Tapered Roller Bearing |
| Function | Wheel Bearing |
| Placement on Vehicle | Front Axle, Rear Axle |
| Width | 48.5 mm |
| Outer diameter | 130 mm |
| Inner diameter | 60 mm |
| Type | Wheel Bearing |
| Weight | 2.99 kg |
| Bearing Code | 32312A |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.84
Important compatibility info
| Weight | 0.015 kg |
| Number of Connectors / Ports | 2 |
| for OE number | 1J0 907 543 A |
| Function | Sensor, interior temperature |
| Type | Sensor, interior temperature |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£12.82
Important compatibility info
| Weight | 0.271 kg |
| Voltage | 24 V |
| Combi Switch Function | with indicator function, with high beam function, with hazard warning light function |
| for OE number | 70351705 |
| Type | Direction Indicator Switch / Hazard Warning Light Switch / Steering Column Switch / Switch, headlight |
| Function | Direction Indicator Switch / Hazard Warning Light Switch / Steering Column Switch / Switch, headlight |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.08
Important compatibility info
| Weight | 15.9 kg |
| Rim Hole Number | 5 -Hole |
| Placement on Vehicle | Front Axle Left |
| Outer diameter | 374 mm |
| Thickness | 66.3 mm |
| Brake Disc Thickness | 36 mm |
| Minimum thickness | 34.4 mm |
| Bolt Hole Circle Diameter | 120 mm |
| Centering Diameter | 75 mm |
| Paired article numbers | 171461 |
| Surface | Coated |
| Number of mounting bores | 1 |
| Machining | High-carbon |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
| Rotor Style | Internally Vented |
Additional Information
Technical Information
Attention, this is a sided brake disc.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£83.81
Important compatibility info
| Weight | 1.183 kg |
| Placement on Vehicle | Rear Axle |
| Length | 103 mm |
| Outer diameter | 69 mm |
| Bolt Hole Circle Diameter | 15 mm |
| Type | Mounting, stabiliser bar |
| Function | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.56
Important compatibility info
| Number of Connectors / Ports | 2 |
| Voltage | 24 V |
| Fulfils test standard | VG 96917 |
| Function | Socket |
| Protection Type (IP Code) | X4, X7, 54 |
| Cross Section | 35 mm² |
| Type | Socket |
| Additional Information 2 | with lid |
| Weight | 0.350 kg |
| Version | OE Standard |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.22
Important compatibility info
| Weight | 0.649 kg |
| Inner diameter 1 | 30 mm |
| Inner diameter 2 | 19 mm |
| Cooling Hose | from water pipe to auxiliary water pump |
| Type | Radiator Hose |
| Function | Radiator Hose |
| Additional Information | with quick coupling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.46
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Outer diameter | 335 mm |
| Thickness | 118 mm |
| Brake Disc Thickness | 34 mm |
| Brake Disc Type | Internally Vented |
| Minimum thickness | 28 mm |
| Bolt Hole Circle Diameter | 176 mm |
| Surface | Coated |
| Function | Brake Disc |
| Internal Thread Size | M14 x 1,5, M8 x 1,25 |
| Weight | 16.4 kg |
| Rim Hole Number | 10 -Hole |
| Type | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£74.02
Important compatibility info
| Length | 1725 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Function | V-Ribbed Belt |
| Number of Ribs | 10 |
| Weight | 0.293 kg |
| Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.56
Important compatibility info
| Weight | 3.300 kg |
| Placement on Vehicle | Right |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
| for OE number | 1 895 282 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£107.88
Important compatibility info
| Additional Information 2 | with nut |
| Wheel Sided Joint Diameter | 98 mm |
| Additional Information | with Split Pin |
| Placement on Vehicle | Front Axle Right |
| Transmission-side joint diameter | 88.9 mm |
| Type | Drive Shaft |
| Thread Size | M24 x 2,0 |
| Weight | 11.410 kg |
| External Teeth, Wheel Side | 28 |
| Min. Length | 1060 mm |
| External Teeth, Diff.Side | 36 |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£78.84
Important compatibility info
| Weight | 0.020 kg |
| Number of Connectors / Ports | 4 |
| Function | Sensor, intake manifold pressure |
| Type | Sensor, intake manifold pressure |
| for OE number | 1 923 995 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£39.08
Important compatibility info
| Weight | 1.3 kg |
| Voltage | 12 V |
| Driver Position | for right-hand drive vehicles |
| Number of Connectors / Ports | 2 |
| Rated Power | 280 W |
| Function | Interior Blower |
| Type | Interior Blower |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.93
Important compatibility info
| Rod/Strut | Coupling Rod |
| Thread Length | 36 mm |
| Weight | 0.383 kg |
| Type | Link/Coupling Rod, stabiliser bar |
| Function | Link/Coupling Rod, stabiliser bar |
| External Thread Size | M12 x 1,25 |
| Spanner Size | 18 |
| Length | 152 mm |
| Diameter | 1 mm |
| Material | Steel |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£13.76
Important compatibility info
| Function | Release Fork, clutch |
| for OE number | 1 737 306 |
| Weight | 3.776 kg |
| Type | Release Fork, clutch |
| Additional Information | with bush, with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£96.81
Important compatibility info
| Weight | 1.37 kg |
| Placement on Vehicle | Right, Lower, Front, Front Axle |
| Material | Aluminium |
| Steering arm type | Control Arm |
| Paired article numbers | 106559 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | without ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£55.28
Important compatibility info
| Weight | 3.581 kg |
| Length | 188 mm |
| Height | 183 mm |
| Width | 183 mm |
| Function | Hydraulic Pump, steering |
| Internal Thread Size | M26 x 1,5, M16 x 1,5 |
| for OE number | 74 21 186 659 S1 |
| Type | Hydraulic Pump, steering |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£230.17
Important compatibility info
| Inner diameter 2 | 54 mm |
| Weight | 0.167 kg |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 208 mm |
| Material | Thermoplastic polyester elastomer |
| Inner diameter 1 | 13 mm |
| Function | Bellow Kit, steering |
| Type | Bellow Kit, steering |
| Additional Information | with grease |
| Additional Information 2 | with clamps |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow Kit, steering (180178)
- 1x Febi Molybdenum Grease (02582)
£38.59
Important compatibility info
| Weight | 0.345 kg |
| Function | Pump, fuel pre-supply |
| Type | Pump, fuel pre-supply |
| Internal Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.03
Important compatibility info
| Outer diameter | 75 mm |
| Height | 78 mm |
| Additional Information 2 | with seal ring |
| Spanner Size | 32 |
| Weight | 0.10 kg |
| Bolt Head/Nut Design | Male Hex |
| Tightening Torque | 25 Nm |
| Type | Cap, oil filter housing |
| Function | Cap, oil filter housing |
| Extra Description | febi Plus |
| Manufacturer's restriction oil filter housing | Mahle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.56
Important compatibility info
| Type | Cable Pull, manual transmission |
| Weight | 0.504 kg |
| Function | Cable Pull, manual transmission |
| Placement on Vehicle | Left |
| Inner length 1 | 1154 mm |
| Outer length 1 | 1170 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£53.06
Important compatibility info
| Inspection Tag | ECE R90 Approved |
| Placement on Vehicle | Front Axle |
| Length | 148.2 mm |
| Wear Warning Contact | prepared for wear warning indicator |
| Additional Information 2 | with fastening material |
| Weight | 2.170 kg |
| Function | Brake Pad Set, disc brake |
| Type | Brake Pad Set, disc brake |
| Thickness/Strength 1 | 18.7 mm |
| Width | 63.4 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.62
Important compatibility info
| Type | Brake Caliper |
| Brake caliper piston diameter | 54 mm |
| Placement on Vehicle | Front Axle Left |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 178747 |
| Weight | 2.715 kg |
| Function | Brake Caliper |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.68
Important compatibility info
| Piston conrod diameter | 8 mm |
| Type | Gas Spring, boot/cargo area |
| Function | Gas Spring, boot/cargo area |
| Housing length | 228.5 mm |
| Eject Force | 564 N |
| Stroke | 153 mm |
| Mounting points diameter | 17.8 mm |
| Placement on Vehicle | both sides |
| Housing Diameter | 19 mm |
| Weight | 0.2 kg |
| Length | 418 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.51
Important compatibility info
| Material | Rubber/Metal |
| External Thread Size | M8 x 1,25 |
| Weight | 1.1 kg |
| Placement on Vehicle | Front Axle Left |
| Paired article numbers | 39575 |
| Function | Suspension Strut Support Mount |
| Type | Suspension Strut Support Mount |
| Additional Information 2 | without ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.84
Important compatibility info
| Weight | 0.152 kg |
| Function | Valve, crankcase ventilation |
| for OE number | 06F 129 101 P S1 |
| Extra Description | febi Plus |
| Type | Valve, crankcase ventilation |
| Additional Information | with gasket/seal |
| Colour | Black |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Valve, crankcase ventilation (47725)
- 1x Febi Gasket, crankcase ventilation (44481)
£30.49
Important compatibility info
| Length | 47 mm |
| Outer diameter | 40 mm |
| Inner diameter | 16 mm |
| Weight | 0.21 kg |
| Placement on Vehicle | Rear Axle, Rear |
| Function | Bushing, leaf spring |
| Type | Bushing, leaf spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£6.92
Important compatibility info
| Weight | 0.44 kg |
| Piston Diameter | 23.8 mm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Material | Grey Cast Iron |
| Function | Wheel Brake Cylinder |
| Type | Wheel Brake Cylinder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.71
Important compatibility info
| Number of Connectors / Ports | 2 |
| Weight | 0.098 kg |
| Function | Sensor, compressed-air system |
| Type | Sensor, compressed-air system |
| Shifting Points | 8 bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£84.24
Important compatibility info
| Function | Suspension Spring |
| Type | Suspension Spring |
| Placement on Vehicle | Front Axle |
| Length | 332 mm |
| Outer diameter | 137 mm |
| Number of Coils | 5.8 |
| Weight | 1.75 kg |
| Paired article numbers | 181326 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£24.28
Important compatibility info
| Additional Information 2 | with exhaust manifold |
| Weight | 9.5 kg |
| Charge Type | Exhaust Turbocharger |
| Type | Charger, charging (supercharged/turbocharged) |
| Additionally required parts | Mounting Kit, motor-specific oil supply lines (feed/return) |
| Function | Charger, charging (supercharged/turbocharged) |
| Extra Description | Garrett Turbo REMAN |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£518.65
Important compatibility info
| Weight | 0.42 kg |
| Piston Diameter | 19 mm |
| Placement on Vehicle | Rear Axle Left |
| Paired article numbers | 09604 |
| Function | Wheel Brake Cylinder |
| Type | Wheel Brake Cylinder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.04
Important compatibility info
| Weight | 0.35 kg |
| Placement on Vehicle | Front Axle Right |
| Length | 300 mm |
| Paired article numbers | 24623 |
| Rod/Strut | Coupling Rod |
| Function | Link/Coupling Rod, stabiliser bar |
| External Thread Size | M10 x 1,5 |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.55
Important compatibility info
| Weight | 0.868 kg |
| Placement on Vehicle | Front Axle |
| Material | Rubber/Metal |
| Outer diameter | 154 mm |
| Inner diameter | 16 mm |
| Function | Suspension Strut Support Mount |
| Type | Suspension Strut Support Mount |
| Height | 70 mm |
| Additional Information 2 | without ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£22.04
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023