Important compatibility info
Number of Connectors / Ports | 4 |
Weight | 0.2 kg |
Type | Mass Air Flow Sensor |
Resistor Type | Hot-wire Sensor |
Function | Mass Air Flow Sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle |
Shock Absorber Type | Oil Pressure |
Shock Absorber Design | Telescopic Shock Absorber |
Shock Absorber Mounting Type | Top eye, Bottom eye |
Max. Length | 716 mm |
Min. Length | 437 mm |
Pipe Diameter | 45 mm. 63 mm |
Mounting points diameter | 16 mm |
Piston conrod diameter | 15 mm |
Type | Shock Absorber |
Function | Shock Absorber |
Weight | 3.09 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.040 kg |
Chain Type | Simplex, with chain lock |
Number of Chain Links | 86 |
Type | Timing Chain Kit |
Function | Timing Chain Kit |
Extra Description | Basic Short Kit |
Timing Chain Size | G53HS-8, G53HS-7 |
Placement on Vehicle | Upper |
for OE number | 11 31 8 590 950 S4 |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (49508)
- 1x Febi Tensioner, timing chain (28718)
- 1x Febi Guide, timing chain (28726)
- 1x Febi Guide, timing chain (105979)
Important compatibility info
Placement on Vehicle | Rear Axle |
Width | 32 mm |
Outer diameter | 200 mm |
Inspection Tag | ECE R90 Approved |
Mounting Type | Pre-assembled |
Function | Brake Shoe Set |
Weight | 2.100 kg |
Piston Diameter | 19 mm |
Type | Brake Shoe Set |
Additional Information | with wheel brake cylinder, with accessories, with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Rotor Style | Internally Vented |
Weight | 9.72 kg |
Rim Hole Number | 5 -Hole |
Placement on Vehicle | Front Axle |
Outer diameter | 330 mm |
Thickness | 38.1 mm |
Brake Disc Thickness | 28 mm |
Minimum thickness | 26.4 mm |
Bolt Hole Circle Diameter | 127 mm |
Centering Diameter | 72.5 mm |
Surface | Coated |
Type | Brake Disc Rotor |
Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.5 kg |
Chain Type | Simplex, Closed chain |
Number of Chain Links | 64 |
Function | Chain Kit, oil pump drive |
Type | Chain Kit, oil pump drive |
Timing Chain Size | G53HP, G53HR |
Wet Boiling Point | 110 °C |
Extra Description | Standard Medium Kit |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Gear, balance shaft (40264)
- 1x Febi Chain, oil pump drive (25357)
- 1x Febi Chain Tensioner, oil pump drive (25417)
Important compatibility info
Placement on Vehicle | Front Axle |
Length | 220 mm |
Thread Size | M38 x 1,5 LHT |
Paired article numbers | 196584 |
Bore Diameter | 24.4 mm |
Weight | 3.009 kg |
Type | Tie Rod End |
Function | Tie Rod End |
Thread Type | with left-hand thread |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle |
Length | 220 mm |
Thread Size | M38 x 1,5 |
Paired article numbers | 196585 |
Bore Diameter | 24.4 mm |
Weight | 3.009 kg |
Type | Tie Rod End |
Function | Tie Rod End |
Thread Type | with right-hand thread |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Right |
Material | Cast Iron |
Brake Caliper Type | Brake Caliper (1 piston) |
Paired article numbers | 185998 |
Weight | 7.8 kg |
Type | Brake Caliper |
Function | Brake Caliper |
Brake caliper piston diameter | 44 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Brake Caliper Type | Brake Caliper (1 piston) |
Material | Cast Iron |
Paired article numbers | 185999 |
Weight | 7.8 kg |
Type | Brake Caliper |
Function | Brake Caliper |
Brake caliper piston diameter | 44 mm |
Placement on Vehicle | Front Axle Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.02 kg |
Number of Connectors / Ports | 3 |
Type | Sensor, intake manifold pressure |
Function | Sensor, intake manifold pressure |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 307 mm |
Function | Interior Blower |
Voltage | 24 V |
Weight | 1.897 kg |
Type | Interior Blower |
for OE number | 20926019 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.130 kg |
Type | Cable Pull, manual transmission |
Function | Cable Pull, manual transmission |
Inner length 1 | 1165 mm |
Inner length 2 | 887 mm |
Outer length 1 | 1237 mm |
Outer length 2 | 940 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
for OE number | 33220-77E00 |
Function | Sensor, crankshaft pulse |
Type | Sensor, crankshaft pulse |
Weight | 0.052 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Paired article numbers | 182443 |
External Teeth, Diff.Side | 33 |
Min. Length | 924 mm |
Weight | 8.074 kg |
Transmission-side joint diameter | 74 mm |
Wheel Sided Joint Diameter | 79 mm |
External Teeth, Wheel Side | 26 |
Additional Information 2 | with nut |
Thread Size | M22x1,5 |
Type | Drive Shaft |
Function | Drive Shaft |
Placement on Vehicle | Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Mounting, engine |
Function | Mounting, engine |
Placement on Vehicle | Right |
Weight | 2.002 kg |
Bearing/Mounting Type | Hydro Mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Mounting, engine |
Bearing/Mounting Type | Rubber-Metal Mount |
Placement on Vehicle | Left |
Weight | 1.700 kg |
Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Connectors / Ports | 4 |
Function | Ignition Coil |
Type | Ignition Coil |
Weight | 0.237 kg |
for OE number | 270 906 05 00 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Left |
Bearing/Mounting Type | Hydro Mount |
Type | Mounting, automatic transmission |
Function | Mounting, automatic transmission |
Weight | 2.920 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Bearing/Mounting Type | Hydro Mount |
Type | Mounting, automatic transmission |
Function | Mounting, automatic transmission |
Placement on Vehicle | Left |
Weight | 2.930 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | both sides |
Weight | 1.230 kg |
Bearing/Mounting Type | Hydro Mount |
Type | Mounting, engine |
Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Rim Hole Number | 5 -Hole |
Placement on Vehicle | Front Axle |
Outer diameter | 345 mm |
Thickness | 51 mm |
Brake Disc Thickness | 31.9 mm |
Minimum thickness | 30 mm |
Bolt Hole Circle Diameter | 112 mm |
Centering Diameter | 67 mm |
Surface | Coated |
Number of mounting bores | 3 |
Function | Brake Disc |
Weight | 11.15 kg |
Type | Brake Disc Rotor |
Rotor Style | Internally Vented |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.625 kg |
Type | Timing Chain |
Chain Type | Simplex, Closed chain |
Timing Chain Size | G68HR-8 |
Number of Chain Links | 112 |
Function | Timing Chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Steering arm type | Control Arm |
Type | Control/Trailing Arm, wheel suspension |
Paired article numbers | 184531 |
Cone Size | 16 mm |
Additional Information 2 | with ball joint |
Additional Information | with rubber mounts, with lock nut |
Material | Sheet Steel |
External Thread Size | M16 x 1,5 |
Weight | 6.864 kg |
Function | Control/Trailing Arm, wheel suspension |
Cone Size 2 | 24 mm |
Placement on Vehicle | Front Axle Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.377 kg |
Type | Rotor Set, oil pump |
Function | Rotor Set, oil pump |
Extra Description | febi Plus |
Additional Information 2 | with shaft seal, with control housing gasket |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Rotor Set, oil pump (104151)
- 1x Febi Gasket Kit, crankcase (46470)
Important compatibility info
Placement on Vehicle | Front Axle Left |
Bore Diameter | 10.55 mm |
Transmission-side joint diameter | 85.1 mm |
Additional Information 2 | with screw |
Thread Size | M16x1,5 |
Bolt Hole Circle Diameter | 99.5 mm |
Function | Drive Shaft |
Weight | 6.288 kg |
Min. Length | 474 mm |
Wheel Sided Joint Diameter | 97.8 mm |
Type | Drive Shaft |
External Teeth, Wheel Side | 36 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 10.594 kg |
Rotor Style | perforated/vented |
Centering Diameter | 67 mm |
Bolt Hole Circle Diameter | 112 mm |
Thickness | 64.5 mm |
Brake Disc Thickness | 32 mm |
Placement on Vehicle | Front Axle |
Outer diameter | 322 mm |
Function | Brake Disc |
Number of mounting bores | 1 |
Surface | Coated |
Minimum thickness | 30 mm |
Rim Hole Number | 5 -Hole |
Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.53 kg |
Replaces | 43705 |
Material | Rubber/Metal |
Bearing/Mounting Type | electrically adjustable hydro mount |
Type | Mounting, engine |
Function | Mounting, engine |
Number of Connectors / Ports | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Rotor Style | Internally Vented |
Function | Brake Disc |
Type | Brake Disc Rotor |
Weight | 9.5 kg |
Surface | Coated |
Centering Diameter | 70 mm |
Bolt Hole Circle Diameter | 114.3 mm |
Minimum thickness | 23 mm |
Thickness | 68 mm |
Outer diameter | 320 mm |
Placement on Vehicle | Front Axle |
Rim Hole Number | 5 -Hole |
Brake Disc Thickness | 25 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with gaskets/seals, with oil filter, with oil cooler |
Additional Information 2 | with pressure sensor |
Weight | 1.7 kg |
for OE number | 03N 115 389 M |
Type | Housing, oil filter |
Function | Housing, oil filter |
Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023