Proud to be a UK-based company
Contact us
Important compatibility info
| Width | 46 mm |
| Outer diameter | 59 mm |
| Inner diameter | 15 mm |
| Number of Ribs | 6 |
| Weight | 0.539 kg |
| Type | Alternator Freewheel Clutch |
| Function | Alternator Freewheel Clutch |
| Additional Information 2 | with lid |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£88.89
Important compatibility info
| Additional Information | with gasket/seal |
| Material | Plastic |
| Colour | Black |
| Weight | 1.9 kg |
| Heating / Cooling | with jiggle pin |
| Type | Cylinder Head Cover |
| Function | Cylinder Head Cover |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£88.89
Important compatibility info
| Thread Size | M22x1,5 |
| External Teeth, Diff.Side | 34 |
| Transmission-side joint diameter | 79 mm |
| Weight | 5.554 kg |
| Min. Length | 591 mm |
| External Teeth, Wheel Side | 26 |
| Additional Information 2 | with nut |
| Wheel Sided Joint Diameter | 82.1 mm |
| Function | Drive Shaft |
| Type | Drive Shaft |
| Placement on Vehicle | Front Axle Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£88.89
Important compatibility info
| Extra Description | ProKit |
| Function | Tie Rod |
| Cone Size | 26 mm |
| Additional Information 2 | with crown nut |
| Outer diameter | 40 mm |
| Length | 1562 mm |
| Weight | 9.01 kg |
| External Thread Size | M20 x 1,5, M30 x 1,5 |
| Type | Tie Rod |
| Thickness | 5.7 mm |
| Placement on Vehicle | Front Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£88.89
Important compatibility info
| Weight | 11.85 kg |
| Placement on Vehicle | Front Axle |
| Function | Tie Rod |
| Type | Tie Rod |
| Extra Description | ProKit |
| External Thread Size | M24 x 1,5 |
| Internal Thread Size | M30 x 1,5 LHT |
| Pipe Diameter | 40 mm |
| Cone Size | 30 mm |
| Additional Information 2 | with crown nut |
| Outer diameter | 40 mm |
| Length | 1736 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£88.89
Important compatibility info
| for OE number | 18011-RNA-A00 |
| Weight | 0.825 kg |
| Additional Information | with gasket/seal |
| Number of Connectors / Ports | 5 |
| Type | EGR Valve |
| Function | EGR Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£88.89
Important compatibility info
| Extra Description | ProKit |
| Placement on Vehicle | Front Axle |
| Length | 895 mm |
| Additional Information 2 | with crown nut |
| Rod/Strut | Push Rod |
| Weight | 5.550 kg |
| Cone Size | 22 mm |
| Pipe Diameter | 38 mm |
| Type | Centre Rod Assembly |
| Function | Centre Rod Assembly |
| External Thread Size | M18 x 1,5, M30 x 1,5 LHT |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£88.89
Important compatibility info
| Weight | 0.883 kg |
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 142 |
| Timing Chain Size | G53HP, G53HR |
| Function | Timing Chain Kit |
| Extra Description | Basic Short Kit |
| Type | Timing Chain Kit |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (29868)
- 1x Febi Tensioner, timing chain (26751)
- 1x Febi Guide, timing chain (24287)
- 1x Febi Guide, timing chain (24286)
- 1x Febi Holder, timing chain tensioner (38015)
- 1x Febi Lock Cover, timing chain tensioner (mounting hole) (38327)
£88.89
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Thread Size | M14 x 1,5 |
| External Teeth, Wheel Side | 33 |
| Weight | 6.781 kg |
| Min. Length | 596 mm |
| Wheel Sided Joint Diameter | 88 mm |
| Transmission-side joint diameter | 130 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£88.89
Important compatibility info
| Function | Repair Kit, kingpin |
| Length | 225 mm |
| Outer diameter | 50 mm |
| Type | Repair Kit, kingpin |
| Weight | 4.680 kg |
| Placement on Vehicle | both sides |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Kingpin (32432)
- 2x Febi Seal Ring, steering knuckle (28398)
- 1x Febi Bush, kingpin (28397)
- 2x Febi Seal Ring, steering knuckle (32434)
- 2x Febi Circlip (05370)
- 2x Febi Bush, steering knuckle (08524)
- 1x Febi Nut (32433)
- 1x Febi Spacer, kingpin (32436)
- 1x Febi Screw (32435)
- 1x Febi Grease Nipple (04187)
- 1x Febi Bush, steering knuckle (28396)
- 1x Febi Lock Ring, steering knuckle (28395)
- 1x Febi Lock Ring, steering knuckle (28394)
£88.89
Important compatibility info
| Additional Information | with fastening/mounting material, without electric motor |
| Placement on Vehicle | Left Rear |
| Operating Mode | Electric |
| Paired article numbers | 179231 |
| Weight | 0.86 kg |
| Type | Window Regulator |
| Function | Window Regulator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£88.89
Important compatibility info
| Function | Clutch Release Bearing |
| Weight | 3.446 kg |
| Type | Clutch Release Bearing |
| Additional Information 2 | with mounting kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Clutch Release Bearing (105416)
- 1x Febi Repair Kit, clutch release bearing (105270)
£88.89
Important compatibility info
| Function | Window Regulator |
| Type | Window Regulator |
| Weight | 0.86 kg |
| Paired article numbers | 179232 |
| Placement on Vehicle | Right Rear |
| Additional Information | with fastening/mounting material, without electric motor |
| Operating Mode | Electric |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£88.89
Important compatibility info
| Weight | 1.310 kg |
| Outer diameter | 70 mm. 73.5 mm |
| Operating Mode | Automatic |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Plastic |
| Type | Belt Tensioner, v-ribbed belt |
| Width of castor bearing surface | 26 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£88.89
Important compatibility info
| Parameter | VL120R |
| Weight | 1.008 kg |
| Function | Clutch, radiator fan |
| Type | Clutch, radiator fan |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£88.89
Important compatibility info
| Placement on Vehicle | Rear |
| Mounting points diameter | 20 mm |
| Piston conrod diameter | 13 mm |
| Function | Shock Absorber, driver cab suspension |
| Operating Mode | Pneumatic |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 329 mm |
| Min. Length | 253 mm |
| Pipe Diameter | 44 mm. 53 mm |
| External Thread Size | M10 x 1 |
| Weight | 2.5 kg |
| Type | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£88.89
Important compatibility info
| Additional Information | with piston |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 259 mm. 180 mm |
| Thickness | 280 mm. 130 mm |
| Function | Bellow, air suspension |
| Weight | 10.0 kg |
| External Thread Size | M12 x 1,5, M16 x 1,5, M18 x 2 |
| Type | Bellow, air suspension |
| Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£88.89
Important compatibility info
| Width | 35 mm |
| Outer diameter | 180 mm |
| Inner diameter | 35 mm |
| Number of Ribs | 5 |
| Parameter | 6PK |
| Function | Belt Pulley, crankshaft |
| Additional Information 2 | with screw |
| Weight | 2.535 kg |
| Extra Description | ProKit |
| Type | Belt Pulley, crankshaft |
Additional Information
Technical Information
Attention!: The old bolt has to be replaced with the enclosed bolt. Tightening torque specification of the vehicle manufacturer have to be obeyed.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Belt Pulley, crankshaft (27215)
- 1x Febi Centering Bolt, crankshaft pulley (33619)
£88.87
Important compatibility info
| Placement on Vehicle | Upper Left |
| Paired article numbers | 173816 |
| Weight | 2.408 kg |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, automatic transmission |
| Function | Mounting, automatic transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£88.86
Important compatibility info
| Voltage | 12 V |
| Number of Teeth | 8 |
| Rated Power | 1.2 kW |
| Weight | 2.93 kg |
| Type | Starter |
| Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£88.85
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023