Important compatibility info
Weight | 0.767 kg |
Belts | with trapezoidal tooth profile |
Number of Teeth | 194 |
Function | Timing Belt Kit |
Type | Timing Belt Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt (47728)
- 1x Febi Tensioner Pulley, timing belt (10298)
- 1x Febi Deflection Pulley/Guide Pulley, timing belt (23654)
- 1x Febi Mounting Set, tension/deflection pulley (timing belt) (178793)
Important compatibility info
Weight | 10.670 kg |
Placement on Vehicle | Rear Axle Left, Lower, Rear Axle Right |
Length | 573 mm |
Material | Steel |
Outer diameter | 50 mm |
Inner diameter | 19 mm |
Steering arm type | Trailing Arm |
Rod/Strut | Guide Rod |
Function | Control/Trailing Arm, wheel suspension |
Pipe Diameter | 50 mm |
Mounting points diameter | 19 mm |
Type | Control/Trailing Arm, wheel suspension |
Hole Spacing | 130 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 6.5 kg |
External Thread Size | M16 x 1,5, M24 x 1,5 |
Rolling piston material | Steel |
Outer diameter | 155 mm. 190 mm |
Thickness | 280 mm. 155 mm |
Type | Bellow, air suspension |
Function | Bellow, air suspension |
Additional Information | with piston |
Port / Connector type | Voss Stecksystem 232 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Right, Lower |
Additional Information | with lock nut |
Material | Sheet Steel |
Additional Information 2 | with bearing, with ball joint |
External Thread Size | M18 x 1,5 |
Weight | 7.449 kg |
Paired article numbers | 43657 |
Cone Size | 23 mm |
Type | Control/Trailing Arm, wheel suspension |
Steering arm type | Triangular Control Arm (CV) |
Extra Description | ProKit |
Function | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.397 kg |
Chain Type | Simplex, Closed chain |
Number of Chain Links | 134 |
Timing Chain Size | G53RING-2 |
Type | Timing Chain |
Function | Timing Chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.850 kg |
Placement on Vehicle | Front Axle Left, Upper |
Material | Aluminium |
Inner diameter | 12 mm |
Steering arm type | Control Arm |
Paired article numbers | 23940 |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with ball joint |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Wheel Sided Joint Diameter | 101 mm |
External Teeth, Diff.Side | 39 |
Placement on Vehicle | Front Axle Right |
ABS Ring Diameter | 102 mm |
External Teeth, Wheel Side | 28 |
Min. Length | 1141 mm |
Weight | 10.836 kg |
Additional Information 2 | with nut |
Function | Drive Shaft |
Type | Drive Shaft |
Transmission-side joint diameter | 81.5 mm |
Thread Size | M24x1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Right, Lower |
Material | Aluminium |
Additional Information 2 | without ball joint |
Steering arm type | Control Arm |
Paired article numbers | 181748 |
Weight | 4.402 kg |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Lower |
Weight | 4.402 kg |
Type | Control/Trailing Arm, wheel suspension |
Paired article numbers | 181745 |
Material | Aluminium |
Additional Information 2 | without ball joint |
Steering arm type | Control Arm |
Function | Control/Trailing Arm, wheel suspension |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 11.15 kg |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Length | 200 mm |
Width | 120 mm |
Thickness | 165 mm |
Function | Mounting, leaf spring |
Internal Thread Size | M20 x 2 |
Hole Spacing | 60 mm. 170 mm |
Type | Mounting, leaf spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Rotor Style | Solid |
Weight | 5.11 kg |
Placement on Vehicle | Rear Axle |
Outer diameter | 249 mm |
Thickness | 67.2 mm |
Brake Disc Thickness | 9 mm |
Minimum thickness | 7 mm |
Bolt Hole Circle Diameter | 108 mm |
Centering Diameter | 63.4 mm |
Surface | Oiled |
Type | Brake Disc Rotor |
Function | Brake Disc |
Rim Hole Number | 4 -Hole |
Additional Information 2 | with ABS sensor ring, with grease cap |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Inner diameter | 15 mm |
Function | Mounting, engine / Mounting, manual transmission |
Width | 230 mm |
Thickness | 130 mm |
Type | Mounting, engine / Mounting, manual transmission |
Bearing/Mounting Type | Rubber-Metal Mount |
Weight | 7.002 kg |
Placement on Vehicle | Rear, both sides |
Material | Cast Steel |
Internal Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Width | 22 mm |
Number of Teeth | 105 |
Belts | with rounded tooth profile |
Type | Water Pump & Timing Belt Kit |
Function | Water Pump & Timing Belt Kit |
Water pump impeller material | Metal |
Replaces | 173152 |
Weight | 2.120 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt Kit (31061)
- 1x Febi Water Pump, engine cooling (173147)
Important compatibility info
Function | Brake Disc |
Weight | 11.05 kg |
Rotor Style | Internally Vented |
Placement on Vehicle | Front Axle |
Outer diameter | 322 mm |
Thickness | 64.4 mm |
Brake Disc Thickness | 32 mm |
Minimum thickness | 29.4 mm |
Bolt Hole Circle Diameter | 112 mm |
Centering Diameter | 67 mm |
Surface | Coated |
Number of mounting bores | 1 |
Rim Hole Number | 5 -Hole |
Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 10.00 kg |
Length | 714.5 mm |
Material | Steel |
Outer diameter | 246 mm |
Capacity | 30 l |
Operating Pressure | 15.5 bar |
Function | Air Tank, compressed-air system |
Internal Thread Size | M22 x 1,5 |
Number of Connectors / Ports | 4 |
Type | Air Tank, compressed-air system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.130 kg |
Placement on Vehicle | Lower Front Axle, Left |
Material | Aluminium |
Steering arm type | Control Arm |
Paired article numbers | 21740 |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Additional Information | with lock nut |
Additional Information 2 | with ball joint, with bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Mounting, control/trailing arm (21735)
Important compatibility info
Rim Hole Number | 5 -Hole |
Placement on Vehicle | Front Axle |
Outer diameter | 330 mm |
Thickness | 76 mm |
Brake Disc Thickness | 32 mm |
Minimum thickness | 30 mm |
Bolt Hole Circle Diameter | 112 mm |
Centering Diameter | 67 mm |
Surface | Coated |
Number of mounting bores | 1 |
Function | Brake Disc |
Rotor Style | perforated/vented |
Weight | 10.1 kg |
Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Bearing/Mounting Type | Hydro Mount |
Function | Mounting, engine |
Type | Mounting, engine |
Placement on Vehicle | Right |
Weight | 1.400 kg |
for OE number | 238 240 21 00 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Width | 64 mm |
Parameter | 6PK + 5PK |
Type | Belt Pulley, crankshaft |
Weight | 2.138 kg |
Function | Belt Pulley, crankshaft |
Outer diameter | 166 mm |
Inner diameter | 35 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M16 x 1,5, M10 x 1,5 |
Additional Information | with piston |
Weight | 7.7 kg |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Outer diameter | 225 mm. 259 mm |
Thickness | 268 mm |
Type | Bellow, air suspension |
Function | Bellow, air suspension |
Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023