Important compatibility info
Weight | 3.83 kg |
Placement on Vehicle | Front Axle Right |
Material | Sheet Steel |
Steering arm type | Control Arm |
Paired article numbers | 30433 |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | without ball joint |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 1125 mm |
Number of Ribs | 7 |
Weight | 0.874 kg |
Type | V-Ribbed Belt Set |
Function | V-Ribbed Belt Set |
Belt Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Width of castor bearing surface | 30 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi V-Ribbed Belt (38434)
- 1x Febi Belt Tensioner, v-ribbed belt (27445)
Important compatibility info
Placement on Vehicle | Front Axle Left |
Thread Size | M16 x 1,5 |
External Teeth, Wheel Side | 36 |
Weight | 6.557 kg |
External Teeth, Diff.Side | 40 |
Min. Length | 500 mm |
Wheel Sided Joint Diameter | 97.9 mm |
Transmission-side joint diameter | 85 mm |
Type | Drive Shaft |
Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Parts Set, maintenance service |
Weight | 5.49 kg |
Type | Parts Set, maintenance service |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Fuel filter (35426)
- 1x Febi Fuel filter (40578)
- 1x Febi Oil Filter (27799)
- 2x Febi Oil Filter (39215)
Important compatibility info
External Thread Size | M8 x 1,25 |
Length | 153 mm. 180 mm |
Outer diameter | 43 mm |
Bolt Hole Circle Diameter | 16 mm |
Internal Thread Size | M12 x 1,5 |
Weight | 0.464 kg |
Function | Slave Cylinder / Slave Cylinder, engine brake |
Type | Slave Cylinder / Slave Cylinder, engine brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.222 kg |
Type | Cable Pull, manual transmission |
Function | Cable Pull, manual transmission |
Inner length 1 | 1573 mm |
Inner length 2 | 1252 mm |
Outer length 1 | 1880 mm |
Outer length 2 | 1604 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.21 kg |
Number of Connectors / Ports | 5 |
Function | Control Unit, air conditioning |
Extra Description | febi Plus |
Type | Control Unit, air conditioning |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Colour | Black |
Weight | 0.684 kg |
Heating / Cooling | with jiggle pin |
Type | Cylinder Head Cover |
Function | Cylinder Head Cover |
Extra Description | febi Plus |
Additional Information | with gasket/seal |
Material | Plastic |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 73 mm |
Number of Ribs | 6 |
Operating Mode | Automatic |
Housing material | Aluminium |
Function | Belt Tensioner, v-ribbed belt |
Track rollers material | Plastic |
Weight | 0.74 kg |
Type | Belt Tensioner, v-ribbed belt |
Width of castor bearing surface | 29 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.9 kg |
Operating Mode | Electric |
Number of Connectors / Ports | 2 |
Function | EGR Valve |
Type | EGR Valve |
Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | with dryer |
Weight | 2.165 kg |
Type | Condenser, air conditioning |
Function | Condenser, air conditioning |
Core Length | 320 mm |
Core Width | 735 mm |
Core Depth | 16 mm |
Refrigerant | R 134a |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Tensioner, timing chain |
Weight | 0.215 kg |
Type | Tensioner, timing chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Cone Size | 30 mm |
Pipe Diameter | 36 mm |
Function | Centre Rod Assembly |
External Thread Size | M24 x 1,5 |
Placement on Vehicle | Front Axle |
Rod/Strut | Push Rod |
Internal Thread Size | M30 x 1,5 |
Weight | 6.093 kg |
Extra Description | ProKit |
Type | Centre Rod Assembly |
Additional Information | with crown nut and split pin |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.3 kg |
Type | Cylinder Head, air compressor |
Function | Cylinder Head, air compressor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Upper |
Weight | 0.313 kg |
Chain Type | Simplex, Closed chain |
Number of Chain Links | 62 |
Timing Chain Size | G67HR-2 |
Type | Timing Chain |
Function | Timing Chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle, Rear Axle |
Length | 285 mm |
Rod/Strut | Coupling Rod |
Pipe Diameter | 36 mm |
Mounting points diameter | 4.2 mm |
Type | Link/Coupling Rod, stabiliser bar |
Function | Link/Coupling Rod, stabiliser bar |
Extra Description | ProKit |
Weight | 3.25 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Internal Thread Size | M30 x 1,5 RHT |
External Thread Size | M27 x 1,5, M24 x 1,5 |
Function | Centre Rod Assembly |
Cone Size | 32 mm. 30 mm |
Rod/Strut | Push Rod |
Outer diameter | 38 mm |
Length | 885 mm |
Weight | 6.568 kg |
Extra Description | ProKit |
Additional Information | with nuts |
Type | Centre Rod Assembly |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Spanner Size | 17 |
Number of Connectors / Ports | 2 |
Cable Length | 1010 mm |
Function | Sensor, exhaust gas temperature |
Weight | 0.07 kg |
External Thread Size | M14 x 1,5 |
Type | Sensor, exhaust gas temperature |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 8.97 kg |
Placement on Vehicle | Front Axle |
Length | 988 mm |
Width | 50 mm |
Thickness | 116 mm |
Rod/Strut | Guide Rod |
Thread Type | with right-hand thread |
Cone Size | 30 mm |
Function | Centre Rod Assembly |
Internal Thread Size | M30 x 1,5 |
External Thread Size | M24 x 1,5 |
Extra Description | ProKit |
Type | Centre Rod Assembly |
Additional Information | with castellated nut and split pins |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.170 kg |
Number of Connectors / Ports | 15 |
Combi Switch Function | with indicator function, with light dimmer function, with high beam function, with rear fog light function, with fog-lamp function |
Function | Steering Column Switch |
Type | Steering Column Switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.13 kg |
Function | Fan, engine cooling |
Number of Wings | 7 |
Number of Connectors / Ports | 2 |
Rated Power | 450 W |
Thickness | 100 mm |
Outer diameter | 420 mm |
Type | Fan, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 82 mm |
Weight | 1.548 kg |
Width of castor bearing surface | 33 mm |
Function | Deflection/Guide Pulley, v-ribbed belt |
Type | Deflection/Guide Pulley, v-ribbed belt |
Additional Information | with holder |
Housing material | Aluminium |
Track rollers material | Metal |
Inner diameter | 18 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Right |
Driver Position | for right-hand drive vehicles |
Inner length 2 | 1010 mm |
Inner length 1 | 965 mm |
Function | Cable Pull, manual transmission |
Type | Cable Pull, manual transmission |
Weight | 1.332 kg |
Outer length 1 | 1225 mm |
Outer length 2 | 1300 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left |
Material | Aluminium |
Additional Information 2 | with ball joint |
Steering arm type | Triangular Control Arm (CV), Control Arm |
Paired article numbers | 179105 |
Weight | 4.850 kg |
Cone Size | 24 mm |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Auxiliary water pump (cooling water circuit) |
Function | Auxiliary water pump (cooling water circuit) |
Voltage | 12 V |
Operating Mode | Electric |
for OE number | 059 121 012 B |
Weight | 0.62 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Starter |
Weight | 4.0 kg |
Type | Starter |
Rated Power | 2.0 kW |
Number of Teeth | 10 |
Voltage | 12 V |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Paired article numbers | 193433 |
Weight | 5.2 kg |
Placement on Vehicle | Front Axle Right |
Width | 65 mm |
Outer diameter | 100 mm |
Inner diameter | 29 mm |
Bearing Type | Angular Ball Bearing |
Type | Wheel Bearing Kit |
Function | Wheel Bearing Kit |
Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated ABS sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Right |
Material | Sheet Steel |
Steering arm type | Control Arm |
Paired article numbers | 30198 |
Function | Control/Trailing Arm, wheel suspension |
Weight | 4.224 kg |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with ball joint |
Additional Information | with lock nut, with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.05 kg |
Function | Clutch, radiator fan |
Type | Clutch, radiator fan |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left |
Material | Sheet Steel |
Steering arm type | Control Arm |
Paired article numbers | 30199 |
Function | Control/Trailing Arm, wheel suspension |
Weight | 4.224 kg |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with ball joint |
Additional Information | with lock nut, with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023