Important compatibility info
Number of Connectors / Ports | 5 |
Housing Type | with housing |
Weight | 0.248 kg |
Resistor Type | Hot-film Sensor |
Function | Mass Air Flow Sensor |
Type | Mass Air Flow Sensor |
for OE number | 113 094 00 48 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.398 kg |
Number of Connectors / Ports | 14 |
Combi Switch Function | with klaxon, with high beam function, with indicator function, with wipe-wash function |
Type | Steering Column Switch |
Function | Steering Column Switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Vehicle Equipment | for vehicles with electric parking brake |
Brake Caliper Type | Brake Caliper (1 piston) |
Placement on Vehicle | Rear Axle Left |
Additional Information | with electric motor |
Material | Cast Iron |
Type | Brake Caliper |
Function | Brake Caliper |
Brake caliper piston diameter | 44 mm |
Weight | 3.4 kg |
Paired article numbers | 186528 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 3.4 kg |
Brake Caliper Type | Brake Caliper (1 piston) |
Function | Brake Caliper |
Paired article numbers | 186527 |
Material | Cast Iron |
Brake caliper piston diameter | 44 mm |
Type | Brake Caliper |
Vehicle Equipment | for vehicles with electric parking brake |
Additional Information | with electric motor |
Placement on Vehicle | Rear Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Oil sump |
Type | Oil sump |
Spanner Size | 19 |
Length | 429 mm |
Extra Description | febi Plus |
External Thread Size | M13 |
Weight | 2.67 kg |
Additional Information | with oil drain plug |
Additional Information 2 | with bore for oil-level sensor, with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | with nut |
Additional Information | with axle nut |
Function | Drive Shaft |
Weight | 7.128 kg |
Type | Drive Shaft |
Placement on Vehicle | Front Axle Right |
Thread Size | M24x1,5 |
Paired article numbers | 183822 |
External Teeth, Wheel Side | 28 |
External Teeth, Diff.Side | 29 |
Min. Length | 560 mm |
Wheel Sided Joint Diameter | 93.5 mm |
Transmission-side joint diameter | 88.2 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Repair Kit, kingpin |
Weight | 4.139 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 252 mm. 135 mm |
Outer diameter | 36 mm. 50 mm |
Additional Information | with Thrust Bearing |
Extra Description | ProKit |
External Thread Size | M36 x 1,5 |
Type | Repair Kit, kingpin |
Additional Information 2 | with bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Kingpin (10500)
- 1x Febi Bush, steering knuckle (09376)
- 1x Febi Bush, kingpin (14467)
- 1x Febi Washer (10502)
- 1x Febi Seal Ring, steering knuckle (14461)
- 1x Febi Seal Ring (14462)
- 1x Febi Seal Ring, steering knuckle (14459)
- 1x Febi Seal Ring, steering knuckle (14432)
- 1x Febi Spacer, kingpin (14460)
- 2x Febi Spacer, kingpin (14463)
- 4x Febi Spacer, kingpin (14464)
- 2x Febi Spacer, kingpin (14465)
- 2x Febi Spacer, kingpin (14466)
- 1x Febi Split Pin (14433)
Important compatibility info
Rotor Style | Internally Vented |
Rim Hole Number | 5 -Hole |
Weight | 9.9 kg |
Placement on Vehicle | Front Axle |
Outer diameter | 320 mm |
Thickness | 49.3 mm |
Brake Disc Thickness | 26 mm |
Minimum thickness | 23 mm |
Bolt Hole Circle Diameter | 114.3 mm |
Centering Diameter | 62 mm |
Surface | Coated |
Number of mounting bores | 2 |
Type | Brake Disc Rotor |
Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Control/Trailing Arm, wheel suspension |
Placement on Vehicle | Front Axle Right, Upper |
Material | Aluminium |
Steering arm type | Control Arm |
Paired article numbers | 39840 |
Additional Information | with lock nut, with rubber mounts |
External Thread Size | M10 x 1,5 |
Type | Control/Trailing Arm, wheel suspension |
Weight | 1.795 kg |
Additional Information 2 | with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.047 kg |
Placement on Vehicle | Left |
Type | Actuator, seat adjustment |
Operating Mode | Pneumatic |
Material | Plastic |
Function | Actuator, seat adjustment |
Number of Connectors / Ports | 5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Centre Rod Assembly |
Placement on Vehicle | Front Axle |
Length | 891 mm |
Outer diameter | 50 mm |
Thickness | 90.5 mm |
Rod/Strut | Push Rod |
Weight | 6.065 kg |
Cone Size | 22 mm |
Extra Description | ProKit |
Type | Centre Rod Assembly |
Internal Thread Size | M28 x 1,5 RHT |
External Thread Size | M18 x 1,5 |
Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Right, Front Axle Left |
Bolt Hole Circle Diameter | 104 mm |
Bore Diameter | 11 mm |
External Teeth, Wheel Side | 42 |
Weight | 6.190 kg |
Number of mounting bores | 6 |
Min. Length | 462 mm |
Wheel Sided Joint Diameter | 89 mm |
Transmission-side joint diameter | 123 mm |
Type | Drive Shaft |
Function | Drive Shaft |
Thread Size | M16x1,5 |
Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 82 mm |
Weight | 1.548 kg |
Width of castor bearing surface | 33 mm |
Function | Deflection/Guide Pulley, v-ribbed belt |
Type | Deflection/Guide Pulley, v-ribbed belt |
Additional Information | with holder |
Housing material | Aluminium |
Track rollers material | Metal |
Inner diameter | 18 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 1125 mm |
Number of Ribs | 7 |
Weight | 0.874 kg |
Type | V-Ribbed Belt Set |
Function | V-Ribbed Belt Set |
Belt Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Width of castor bearing surface | 30 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi V-Ribbed Belt (38434)
- 1x Febi Belt Tensioner, v-ribbed belt (27445)
Important compatibility info
Placement on Vehicle | Left |
Function | Mounting, engine |
Bearing/Mounting Type | Rubber-Metal Mount |
for OE number | 53126888 |
Weight | 2.570 kg |
Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Right |
Material | Sheet Steel |
Steering arm type | Control Arm |
Paired article numbers | 30198 |
Function | Control/Trailing Arm, wheel suspension |
Weight | 4.224 kg |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with ball joint |
Additional Information | with lock nut, with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.385 kg |
Housing material | Aluminium |
Function | Belt Tensioner, v-ribbed belt |
Operating Mode | Automatic |
Number of Ribs | 7 |
Outer diameter | 74 mm |
Track rollers material | Plastic |
Material | Plastic |
Type | Belt Tensioner, v-ribbed belt |
Width of castor bearing surface | 34 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Adjustable | Adjustable |
Pipe Diameter | 40 mm |
Weight | 6.900 kg |
Length | 680 mm |
Placement on Vehicle | Centre, Front Axle |
Additional Information 2 | with crown nut |
Type | Tie Rod |
External Thread Size | M24 x 1,5 |
Extra Description | ProKit |
Function | Tie Rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.802 kg |
Outer diameter | 160 mm |
Number of Ribs | 5 |
Parameter | 6PK |
Type | Belt Pulley, crankshaft |
Function | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Right Front |
Function | Window Regulator |
Type | Window Regulator |
Operating Mode | Electric |
Additional Information | without electric motor |
Paired article numbers | 177144 |
Weight | 0.864 kg |
Number of Doors | 5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023