Proud to be a UK-based company
Contact us
Important compatibility info
| Material | Grey Cast Iron |
| Number of Wings | 9 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Grey Cast Iron |
| Seal Material | Rubber |
| Weight | 9.235 kg |
| Type | Water Pump, engine cooling |
| Additional Information | with gaskets/seals |
| for OE number | 904 200 49 01 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£83.98
Important compatibility info
| Length | 550 mm |
| Width | 250 mm |
| Material | Metal |
| Thickness | 1.4 mm |
| Function | Gasket, cylinder head |
| Weight | 0.421 kg |
| Type | Gasket, cylinder head |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£83.94
Important compatibility info
| Driver Position | for right-hand drive vehicles |
| Weight | 0.898 kg |
| Type | Cable Pull, manual transmission |
| Function | Cable Pull, manual transmission |
| Inner length 1 | 1034 mm |
| Inner length 2 | 890 mm |
| Outer length 1 | 1249 mm |
| Outer length 2 | 1157 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£83.94
Important compatibility info
| Max. Length | 326 mm |
| Function | Shock Absorber, driver cab suspension |
| Type | Shock Absorber, driver cab suspension |
| Mounting points diameter | 12 mm |
| Min. Length | 171 mm |
| Pipe Diameter | 41 mm. 101 mm |
| Weight | 3.8 kg |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Operating Mode | Mechanical |
| Placement on Vehicle | Rear |
| Paired article numbers | 178446 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£83.94
Important compatibility info
| Function | Front Cover Lock |
| Weight | 0.5 kg |
| Type | Front Cover Lock |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£83.94
Important compatibility info
| Length | 248 mm |
| Outer diameter | 165 mm |
| Weight | 7.02 kg |
| Function | Suspension Spring |
| Number of Coils | 6 |
| Placement on Vehicle | Rear Axle |
| Wire Diameter | 22 mm |
| Type | Suspension Spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£83.94
Important compatibility info
| Extra Description | febi Plus |
| Function | Control Valve, camshaft adjustment |
| for OE number | 271 050 05 78 |
| Type | Control Valve, camshaft adjustment |
| Weight | 0.106 kg |
| Placement on Vehicle | Exhaust Side, Intake Side |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£83.94
Important compatibility info
| Placement on Vehicle | Front Axle, Driver side |
| Length | 982 mm |
| Outer diameter | 48 mm |
| Rod/Strut | Push Rod |
| Weight | 7.900 kg |
| Colour | red/brown |
| Cone Size | 30 mm |
| Function | Centre Rod Assembly |
| Pipe Diameter | 48 mm |
| Extra Description | ProKit |
| External Thread Size | M24 x 1,5 |
| Internal Thread Size | M30 x 1,5 |
| Type | Centre Rod Assembly |
| Additional Information 2 | with crown nut |
| Replaces | 14485 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£83.94
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Transmission-side joint diameter | 108 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
| Wheel Sided Joint Diameter | 98 mm |
| Min. Length | 608 mm |
| Number of mounting bores | 6 |
| Weight | 6.830 kg |
| External Teeth, Wheel Side | 36 |
| Bore Diameter | 10.5 mm |
| Bolt Hole Circle Diameter | 94 mm |
| Thread Size | M16x1,5 |
| Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£83.94
Important compatibility info
| Bolt Hole Circle Diameter | 114.3 mm |
| Inner diameter | 28 mm |
| Additional Information 2 | without wheel bearing |
| Outer diameter | 140 mm |
| External Teeth, Wheel Side | 28 |
| Weight | 1.903 kg |
| Type | Wheel Hub |
| Function | Wheel Hub |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£83.94
Important compatibility info
| External Thread Size | M24 x 1,5 |
| Extra Description | ProKit |
| Function | Tie Rod |
| Placement on Vehicle | Front Axle, Centre |
| Additional Information 2 | with crown nut |
| Length | 1605 mm |
| Type | Tie Rod |
| Pipe Diameter | 40 mm |
| Weight | 9.010 kg |
| Cone Size | 30 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£83.94
Important compatibility info
| Function | Shock Absorber, driver cab suspension |
| Type | Shock Absorber, driver cab suspension |
| Pipe Diameter | 42 mm |
| Mounting points diameter | 12 mm |
| Min. Length | 229 mm |
| Max. Length | 372 mm |
| Weight | 3.5 kg |
| Shock Absorber Mounting Type | Bottom eye, Top pin |
| Paired article numbers | 171727 |
| Operating Mode | Mechanical |
| Placement on Vehicle | Rear |
| External Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£83.94
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Additional Information 2 | with nut |
| Thread Size | M18x1,5 |
| External Teeth, Wheel Side | 25 |
| Weight | 4.534 kg |
| External Teeth, Diff.Side | 22 |
| Min. Length | 640 mm |
| Wheel Sided Joint Diameter | 80 mm |
| Transmission-side joint diameter | 69 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£83.94
Important compatibility info
| Internal Thread Size | M30 x 1,5 RHT |
| Weight | 9.005 kg |
| Placement on Vehicle | Front Axle |
| Length | 966 mm |
| Outer diameter | 50 mm |
| Rod/Strut | Push Rod |
| Cone Size | 30 mm |
| Function | Centre Rod Assembly |
| Driver Position | for left-hand/right-hand drive vehicles |
| Extra Description | ProKit |
| Type | Centre Rod Assembly |
| External Thread Size | M24 x 1,5 |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£83.94
Important compatibility info
| Function | Solenoid Valve, shift cylinder |
| Number of Holes | 2 |
| Type | Solenoid Valve, shift cylinder |
| Weight | 0.319 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£83.94
Important compatibility info
| Weight | 2.3 kg |
| Type | Cylinder Head, air compressor |
| Function | Cylinder Head, air compressor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£83.94
Important compatibility info
| Outer length 1 | 1164 mm |
| Weight | 1.142 kg |
| Type | Cable Pull, manual transmission |
| Inner length 1 | 940 mm |
| Function | Cable Pull, manual transmission |
| Inner length 2 | 887 mm |
| Outer length 2 | 1237 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£83.94
Important compatibility info
| Function | Drive Shaft |
| Type | Drive Shaft |
| Weight | 7.760 kg |
| External Teeth, Diff.Side | 37 |
| External Teeth, Wheel Side | 27 |
| Thread Size | M24x1,5 |
| Additional Information 2 | with nut |
| Placement on Vehicle | Front Axle Left |
| Transmission-side joint diameter | 89 mm |
| Min. Length | 640 mm |
| Wheel Sided Joint Diameter | 98 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£83.94
Important compatibility info
| External Thread Size | M12 x 1,5 |
| Type | Shock Absorber, driver cab suspension |
| Function | Shock Absorber, driver cab suspension |
| Mounting points diameter | 50 mm. 14 mm |
| Piston conrod diameter | 13 mm |
| Min. Length | 286 mm |
| Pipe Diameter | 48 mm |
| Operating Mode | Mechanical |
| Placement on Vehicle | Front |
| Max. Length | 346 mm |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Weight | 1.5 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£83.94
Important compatibility info
| Weight | 6.6 kg |
| Cone Size | 32 mm |
| Rod/Strut | Push Rod |
| Adjustable | Adjustable on both sides |
| Pipe Diameter | 38 mm |
| Function | Centre Rod Assembly |
| Length | 860 mm. 750 mm |
| Extra Description | ProKit |
| Type | Centre Rod Assembly |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£83.94
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023