Proud to be a UK-based company
Contact us
Important compatibility info
| Function | Parts Set, maintenance service |
| Type | Parts Set, maintenance service |
| Weight | 5.573 kg |
| Material | FPM (fluoride rubber) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Fuel filter (31431)
- 1x Febi Oil Filter (27797)
- 1x Febi Gasket, centrifugal cleaner flange (35616)
- 1x Febi Seal Ring, oil drain plug (35640)
- 2x Febi Seal, oil filter housing (35618)
- 2x Febi Oil Filter, manual transmission (38975)
- 1x Febi Air Dryer Cartridge, compressed-air system (35304)
- 1x Febi Filter, cabin air (22095)
- 1x Febi Gasket, centrifugal cleaner flange (35622)
£79.98
Important compatibility info
| Weight | 0.408 kg |
| Function | Chain Kit, oil pump drive |
| Extra Description | Standard Medium Kit |
| Number of Chain Links | 44 |
| Type | Chain Kit, oil pump drive |
| Chain Type | Simplex, Closed chain |
| Additional Information 2 | Requires special tools for mounting |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Chain Kit, oil pump drive (109479)
- 1x Febi Centering Bolt, crankshaft pulley (33618)
- 1x Febi Screw (48337)
£79.98
Important compatibility info
| Combi Switch Function | with indicator function, with wipe-wash function, with high beam function |
| Function | Steering Column Switch |
| Weight | 0.403 kg |
| Type | Steering Column Switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£79.98
Important compatibility info
| Additional Information 2 | with bolts/screws |
| Weight | 2.780 kg |
| Parameter | 7PK |
| Width | 26 mm |
| Outer diameter | 168 mm |
| Inner diameter | 59 mm |
| Number of Ribs | 6 |
| Function | Belt Pulley, crankshaft |
| Extra Description | ProKit |
| Type | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Belt Pulley, crankshaft (31212)
£79.98
Important compatibility info
| Weight | 3.31 kg |
| Placement on Vehicle | Right Rear, Lower |
| Material | Cast Steel |
| Inner diameter | 14 mm |
| Steering arm type | Control Arm |
| Paired article numbers | 40571 |
| Function | Control/Trailing Arm, wheel suspension |
| Extra Description | ProKit |
| External Thread Size | M14 x 1,5 |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with bolts/screws |
| Additional Information | with nuts, with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (36329)
- 1x Febi Bolt, control arm (37661)
- 1x Febi Bolt, control arm (37638)
- 2x Febi Nut (37412)
£79.98
Important compatibility info
| Weight | 4.1 kg |
| Operating Mode | Mechanical |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Paired article numbers | 179736 |
| Placement on Vehicle | Front |
| Max. Length | 372 mm |
| Pipe Diameter | 45 mm |
| Mounting points diameter | 14 mm. 35 mm |
| Type | Shock Absorber, driver cab suspension |
| Function | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£79.98
Important compatibility info
| Weight | 6.300 kg |
| Type | Tie Rod |
| Cone Size | 22 mm |
| Pipe Diameter | 36 mm |
| Length | 1594 mm |
| Placement on Vehicle | Front Axle |
| Additional Information 2 | with crown nut |
| External Thread Size | M18 x 1,5 |
| Function | Tie Rod |
| Extra Description | ProKit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£79.98
Important compatibility info
| Function | Wheel Bearing Kit |
| Type | Wheel Bearing Kit |
| Sealing lip material | NBR (nitrile butadiene rubber) |
| Weight | 4.574 kg |
| Bearing Type | Angular Ball Bearing |
| Inner diameter | 34 mm |
| Placement on Vehicle | Front Axle |
| Width | 92 mm |
| Additional Information | with fastening/mounting material |
| Outer diameter | 102 mm |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with ABS sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£79.98
Important compatibility info
| Function | Shock Absorber, driver cab suspension |
| Placement on Vehicle | Front |
| Operating Mode | Mechanical |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 360 mm |
| Min. Length | 281 mm |
| Pipe Diameter | 45 mm. 62 mm |
| Mounting points diameter | 14 mm. 35 mm |
| Piston conrod diameter | 18 mm |
| Weight | 3.75 kg |
| Type | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£79.98
Important compatibility info
| Weight | 0.910 kg |
| Outer diameter | 65 mm |
| Operating Mode | Automatic |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Plastic |
| Width of castor bearing surface | 24.5 mm |
| Type | Belt Tensioner, v-ribbed belt |
| Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£79.98
Important compatibility info
| Pipe Diameter | 40 mm |
| Rod/Strut | Push Rod |
| Length | 850 mm |
| Function | Centre Rod Assembly |
| Cone Size | 26 mm |
| Weight | 7.2 kg |
| Extra Description | ProKit |
| External Thread Size | M20 x 1,5 |
| Internal Thread Size | M30 x 1,5 RHT |
| Type | Centre Rod Assembly |
| Additional Information | with castellated nut and split pins |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£79.98
Important compatibility info
| Function | Wiper Motor |
| Number of Connectors / Ports | 4 |
| Placement on Vehicle | Rear |
| Voltage | 12 V |
| Weight | 0.9 kg |
| Type | Wiper Motor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£79.98
Important compatibility info
| Length | 809 mm |
| Outer diameter | 50 mm |
| Rod/Strut | Push Rod |
| Weight | 8.355 kg |
| Internal Thread Size | M30 x 1,5 RHT |
| External Thread Size | M24 x 1,5 |
| Function | Centre Rod Assembly |
| Cone Size | 30 mm |
| Pipe Diameter | 50 mm |
| Additional Information | with castellated nut and split pins |
| Driver Position | for left-hand/right-hand drive vehicles |
| Extra Description | ProKit |
| Type | Centre Rod Assembly |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£79.98
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Width | 62 mm |
| Outer diameter | 91 mm |
| Additional Information 2 | Wheel Bearing integrated into wheel hub |
| Inner diameter | 33 mm |
| Weight | 5.130 kg |
| Bearing Type | Tapered Roller Bearing |
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
| Outer diameter 1 | 67 mm |
| Outer diameter 2 | 169 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£79.98
Important compatibility info
| Function | Wheel Bearing Kit |
| Outer diameter | 65 mm |
| Inner diameter | 35 mm |
| Weight | 0.560 kg |
| Placement on Vehicle | Rear Axle |
| Width | 21 mm |
| Type | Wheel Bearing Kit |
| Bearing Type | Tapered Roller Bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Wheel Bearing (175597)
£79.98
Important compatibility info
| Weight | 0.14 kg |
| Colour | Black |
| Number of Connectors / Ports | 4 |
| Combi Switch Function | with wipe-wash function, with rear wipe-wash function, with wipe interval function |
| Type | Steering Column Switch |
| Function | Steering Column Switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£79.98
Important compatibility info
| Weight | 0.12 kg |
| Length | 178 mm |
| Material | Plastic |
| Number of Connectors / Ports | 2 |
| Function | Slave Cylinder, seat adjustment |
| Type | Slave Cylinder, seat adjustment |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£79.98
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| External Teeth, Wheel Side | 28 |
| Additional Information 2 | with nut |
| Thread Size | M24 x 1,5 |
| Paired article numbers | 182962 |
| External Teeth, Diff.Side | 39 |
| Weight | 11.004 kg |
| Function | Drive Shaft |
| Type | Drive Shaft |
| Min. Length | 1117 mm |
| Wheel Sided Joint Diameter | 98 mm |
| Transmission-side joint diameter | 89 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£79.98
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Front Axle Left, Lower |
| Material | Sheet Steel |
| Additional Information 2 | with ball joint |
| Steering arm type | Control Arm |
| Type | Control/Trailing Arm, wheel suspension |
| Cone Size | 22 mm |
| Weight | 5.582 kg |
| Paired article numbers | 181050 |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£79.98
Important compatibility info
| Cone Size | 28.6 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Pipe Diameter | 40 mm |
| Width | 40 mm |
| Thickness | 115 mm |
| Length | 743 mm |
| Weight | 7.05 kg |
| Internal Thread Size | M30 x 1,5 RHT |
| Function | Tie Rod |
| Extra Description | ProKit |
| External Thread Size | M20 x 1,5 |
| Type | Tie Rod |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£79.98
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023