Proud to be a UK-based company
Contact us
Important compatibility info
| Weight | 1.7 kg |
| Number of Wings | 9 |
| Function | Water Pump, engine cooling |
| Seal Material | Metal |
| Water pump impeller material | Metal |
| Material | Cast Aluminium |
| Additional Information | with gasket/seal |
| Type | Water Pump, engine cooling |
| Vehicle Equipment | for vehicles with start-stop function |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£83.00
Important compatibility info
| Function | Brake Disc |
| Centering Diameter | 56 mm |
| Surface | Oiled |
| Minimum thickness | 7 mm |
| Bolt Hole Circle Diameter | 108 mm |
| Thickness | 69.2 mm |
| Brake Disc Thickness | 9 mm |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 248 mm |
| Rim Hole Number | 4 -Hole |
| Weight | 5.56 kg |
| Rotor Style | Solid |
| Type | Brake Disc Rotor |
| Additional Information 2 | with ABS sensor ring, with grease cap |
| Hub external diameter | 30 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£83.00
Important compatibility info
| Weight | 0.065 kg |
| Number of Connectors / Ports | 4 |
| Resistor Type | Hot-wire Sensor |
| Function | Mass Air Flow Sensor |
| Type | Mass Air Flow Sensor |
| Housing Type | without housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£82.99
Important compatibility info
| Length | 760 mm |
| Width | 56 mm |
| Thickness | 38 mm |
| Weight | 0.06 kg |
| Function | Switch, steering column adjustment |
| Type | Switch, steering column adjustment |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£82.99
Important compatibility info
| Function | Drive Shaft |
| Number of Teeth, ABS ring | 48 |
| Transmission-side joint diameter | 108 mm |
| Min. Length | 537 mm |
| Placement on Vehicle | Front Axle Right, Front Axle Left |
| ABS Ring Diameter | 104 mm |
| Weight | 7.250 kg |
| Bore Diameter | 10.5 mm |
| Additional Information 2 | with bolts/screws |
| Thread Size | M16x1,5 |
| External Teeth, Wheel Side | 38 |
| Wheel Sided Joint Diameter | 97.9 mm |
| Number of mounting bores | 6 |
| Bolt Hole Circle Diameter | 94 mm |
| Type | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£82.98
Important compatibility info
| Additional Information 2 | with ball joint |
| Placement on Vehicle | Front Axle Right |
| Material | Aluminium |
| Steering arm type | Triangular Control Arm (CV) |
| Paired article numbers | 179106 |
| Weight | 4.850 kg |
| Cone Size | 24 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£82.96
Important compatibility info
| Bearing/Mounting Type | Hydro Mount |
| Weight | 1.207 kg |
| Placement on Vehicle | Right |
| Paired article numbers | 183362 |
| Type | Mounting, engine |
| Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£82.96
Important compatibility info
| Weight | 2.245 kg |
| Placement on Vehicle | Rear Axle |
| Width | 38 mm |
| Outer diameter | 203.2 mm |
| Inspection Tag | ECE R90 Approved |
| Mounting Type | Pre-assembled |
| Function | Brake Shoe Set |
| Piston Diameter | 20.6 mm |
| Type | Brake Shoe Set |
| Additional Information | with wheel brake cylinder, with accessories, with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£82.96
Important compatibility info
| Weight | 3.43 kg |
| Placement on Vehicle | Front |
| Operating Mode | Pneumatic |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 420 mm |
| Min. Length | 315 mm |
| Pipe Diameter | 82 mm. 44 mm |
| Mounting points diameter | 20 mm. 32 mm |
| Piston conrod diameter | 13 mm |
| Function | Shock Absorber, driver cab suspension |
| External Thread Size | M6 x 1 |
| Type | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£82.95
Important compatibility info
| Internal Thread Size | M30 x 1,5 RHT |
| Weight | 9.005 kg |
| Placement on Vehicle | Front Axle |
| Length | 966 mm |
| Outer diameter | 50 mm |
| Rod/Strut | Push Rod |
| Cone Size | 30 mm |
| Function | Centre Rod Assembly |
| Driver Position | for left-hand/right-hand drive vehicles |
| Extra Description | ProKit |
| Type | Centre Rod Assembly |
| External Thread Size | M24 x 1,5 |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£82.95
Important compatibility info
| Operating Mode | Hydraulic |
| Weight | 0.27 kg |
| Placement on Vehicle | Upper Right |
| Paired article numbers | 12510 |
| Function | Tensioner, timing chain |
| Type | Tensioner, timing chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£82.95
Important compatibility info
| Weight | 8.265 kg |
| Pipe Diameter | 42 mm |
| Function | Centre Rod Assembly |
| Internal Thread Size | M30 x 1,5 RHT |
| External Thread Size | M24 x 1,5 |
| Length | 863 mm |
| Width | 42 mm |
| Thickness | 42 mm |
| Rod/Strut | Push Rod |
| Cone Size | 30 mm |
| Placement on Vehicle | Front Axle |
| Driver Position | for left-hand/right-hand drive vehicles |
| Extra Description | ProKit |
| Type | Centre Rod Assembly |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£82.95
Important compatibility info
| Weight | 1.04 kg |
| Outer diameter | 60 mm |
| Operating Mode | Automatic |
| Type | Belt Tensioner, v-ribbed belt |
| Width of castor bearing surface | 26 mm |
| Function | Belt Tensioner, v-ribbed belt |
| Material | Plastic |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£82.95
Important compatibility info
| Weight | 1.270 kg |
| Width of castor bearing surface | 30 mm |
| Outer diameter | 65 mm |
| Operating Mode | Mechanical |
| Type | Belt Tensioner, v-ribbed belt |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Plastic |
| Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£82.95
Important compatibility info
| External Thread Size | M20 x 1,5 |
| Internal Thread Size | M30 x 1,5 RHT |
| Placement on Vehicle | Front Axle |
| Length | 776 mm. 726 mm |
| Rod/Strut | Push Rod |
| Weight | 6.6 kg |
| Cone Size | 28.6 mm |
| Pipe Diameter | 42 mm |
| Function | Centre Rod Assembly |
| Additional Information | with nuts |
| Extra Description | ProKit |
| Type | Centre Rod Assembly |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£82.95
Important compatibility info
| Paired article numbers | 178396 |
| Operating Mode | Electric |
| Additional Information | with adjuster |
| Lock System | with double sealing |
| Placement on Vehicle | Right Rear |
| Weight | 0.641 kg |
| Type | Door Lock |
| Function | Door Lock |
| Extra Description | febi Plus |
| Number of Connectors / Ports | 7 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£82.95
Important compatibility info
| Length | 290 mm |
| Outer diameter | 53 mm |
| Additional Information 2 | with pressure switch (high pressure side), with pressure switch (low pressure side), with pressure switch |
| Number of Connectors / Ports | 3 |
| Weight | 0.8 kg |
| Number of mounting bores | 2 |
| Mounting points diameter | 10 mm |
| Type | Dryer, air conditioning |
| Function | Dryer, air conditioning |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£82.95
Important compatibility info
| Function | Front Cover Lock |
| Weight | 0.5 kg |
| Type | Front Cover Lock |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£82.95
Important compatibility info
| Piston conrod diameter | 10 mm |
| Type | Gas Spring, boot/cargo area |
| Function | Gas Spring, boot/cargo area |
| Weight | 0.3 kg |
| Length | 316 mm |
| Eject Force | 2010 N |
| Housing Diameter | 35 mm |
| Stroke | 71 mm |
| Mounting points diameter | 19 mm |
| Housing length | 195 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£82.95
Important compatibility info
| Bolt Hole Circle Diameter | 114.3 mm |
| Inner diameter | 28 mm |
| Additional Information 2 | without wheel bearing |
| Outer diameter | 140 mm |
| External Teeth, Wheel Side | 28 |
| Weight | 1.903 kg |
| Type | Wheel Hub |
| Function | Wheel Hub |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£82.95
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023