Important compatibility info
Operating Mode | Hydraulic |
Weight | 0.27 kg |
Placement on Vehicle | Upper Right |
Paired article numbers | 12510 |
Function | Tensioner, timing chain |
Type | Tensioner, timing chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Rod/Strut | Push Rod |
Length | 1490 mm |
Additional Information 2 | with crown nut |
Pipe Diameter | 38 mm |
Cone Size | 26 mm |
Extra Description | ProKit |
Function | Tie Rod |
Type | Tie Rod |
Replaces | 24002 |
Internal Thread Size | M30 x 1,5 LHT, M30 x 1,5 RHT |
External Thread Size | M20 x 1,5 |
Outer diameter | 38 mm |
Placement on Vehicle | Front Axle |
Weight | 9.660 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 3.513 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Width | 57 mm |
Outer diameter | 96 mm |
Inner diameter | 35 mm |
Bearing Type | Ball Bearing |
Type | Wheel Bearing Kit |
Sealing lip material | NBR (nitrile butadiene rubber) |
Function | Wheel Bearing Kit |
Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with ABS sensor ring |
Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Wheel Bearing Kit (172392)
- 1x Febi Axle Bolt, drive shaft (104750)
Important compatibility info
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Thread Size | M27x1,5 |
Bolt Hole Circle Diameter | 94 mm |
Bore Diameter | 10.5 mm |
External Teeth, Wheel Side | 30 |
Weight | 7.630 kg |
Number of mounting bores | 6 |
Min. Length | 651 mm |
Wheel Sided Joint Diameter | 94 mm |
Transmission-side joint diameter | 108 mm |
Type | Drive Shaft |
Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Internal Thread Size | M10 x 1 |
Placement on Vehicle | Rear |
Weight | 2.9 kg |
Pressure | 400 bar |
Type | Door Lock, driver cab |
Function | Door Lock, driver cab |
Additional Information 2 | without switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.96 kg |
Type | Wheel Bearing Kit |
Function | Wheel Bearing Kit |
Inner diameter | 25 mm |
Additional Information 2 | Wheel Bearing integrated into wheel hub, with ABS sensor ring |
Outer diameter | 133 mm |
Additional Information | with fastening/mounting material |
Width | 74 mm |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Number of Holes | 4 |
Bolt Hole Circle Diameter | 100 mm |
Bearing Type | Angular Ball Bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Steering arm type | Control Arm |
Paired article numbers | 31286 |
Placement on Vehicle | Front Axle Left |
Material | Cast Steel |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Weight | 4.70 kg |
Additional Information 2 | without ball joint |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Piston conrod diameter | 10 mm |
Type | Gas Spring, boot/cargo area |
Function | Gas Spring, boot/cargo area |
Weight | 0.3 kg |
Length | 316 mm |
Eject Force | 2010 N |
Housing Diameter | 35 mm |
Stroke | 71 mm |
Mounting points diameter | 19 mm |
Housing length | 195 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M24 x 1,5 |
Extra Description | ProKit |
Function | Tie Rod |
Placement on Vehicle | Front Axle, Centre |
Additional Information 2 | with crown nut |
Length | 1605 mm |
Type | Tie Rod |
Pipe Diameter | 40 mm |
Weight | 9.010 kg |
Cone Size | 30 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.303 kg |
Function | Gasket Set, automatic transmission |
Extra Description | febi Plus |
Type | Gasket Set, automatic transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Thread Size | M10x1,5 |
Additional Information 2 | with screw |
Weight | 7.506 kg |
External Teeth, Diff.Side | 26 |
Min. Length | 943 mm |
Wheel Sided Joint Diameter | 82 mm |
External Teeth, Wheel Side | 36 |
Function | Drive Shaft |
Type | Drive Shaft |
Transmission-side joint diameter | 82 mm |
Placement on Vehicle | Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.04 kg |
Outer diameter | 60 mm |
Operating Mode | Automatic |
Type | Belt Tensioner, v-ribbed belt |
Width of castor bearing surface | 26 mm |
Function | Belt Tensioner, v-ribbed belt |
Material | Plastic |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Voltage | 12 V |
Function | Starter |
Number of Teeth | 9 |
Rated Power | 1.8 kW |
Weight | 3.59 kg |
Type | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Track rollers material | Metal |
Operating Mode | Automatic |
Housing material | Aluminium |
Outer diameter | 74 mm |
Function | Belt Tensioner, v-ribbed belt |
Weight | 1.62 kg |
Type | Belt Tensioner, v-ribbed belt |
for OE number | 5 0407 2744 |
Width of castor bearing surface | 39 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Rated Power | 1.7 kW |
Weight | 3.76 kg |
Number of Teeth | 10 |
Type | Starter |
Voltage | 12 V |
Function | Starter |
for OE number | 02E 911 023 HX |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle, Driver side |
Length | 982 mm |
Outer diameter | 48 mm |
Rod/Strut | Push Rod |
Weight | 7.900 kg |
Colour | red/brown |
Cone Size | 30 mm |
Function | Centre Rod Assembly |
Pipe Diameter | 48 mm |
Extra Description | ProKit |
External Thread Size | M24 x 1,5 |
Internal Thread Size | M30 x 1,5 |
Type | Centre Rod Assembly |
Additional Information 2 | with crown nut |
Replaces | 14485 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front |
Operating Mode | Pneumatic |
Shock Absorber Mounting Type | Bottom eye, Top pin |
Max. Length | 384 mm |
Min. Length | 272 mm |
Pipe Diameter | 34 mm |
Piston conrod diameter | 20 mm |
Function | Shock Absorber, driver cab suspension |
Weight | 2.13 kg |
External Thread Size | M12 x 1,75 |
Type | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.270 kg |
Width of castor bearing surface | 30 mm |
Outer diameter | 65 mm |
Operating Mode | Mechanical |
Type | Belt Tensioner, v-ribbed belt |
Housing material | Aluminium |
Function | Belt Tensioner, v-ribbed belt |
Track rollers material | Plastic |
Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | with bearing, with ball joint |
Steering arm type | Control Arm |
Material | Cast Steel |
Function | Control/Trailing Arm, wheel suspension |
Paired article numbers | 41067 |
Weight | 5.0 kg |
Type | Control/Trailing Arm, wheel suspension |
Placement on Vehicle | Front Axle Right, Lower |
Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Housing material | Aluminium |
Function | Belt Tensioner, v-ribbed belt |
Track rollers material | Plastic |
Operating Mode | Automatic |
Width of castor bearing surface | 40 mm |
Weight | 1.902 kg |
for OE number | 906 200 43 70 |
Outer diameter | 75 mm |
Type | Belt Tensioner, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023