Important compatibility info
Driver Position | for right-hand drive vehicles |
Weight | 0.898 kg |
Type | Cable Pull, manual transmission |
Function | Cable Pull, manual transmission |
Inner length 1 | 1034 mm |
Inner length 2 | 890 mm |
Outer length 1 | 1249 mm |
Outer length 2 | 1157 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Wings | 10 |
Function | Water Pump, engine cooling |
Water pump impeller material | Plastic |
Seal Material | Paper, Rubber |
Material | Grey Cast Iron |
Weight | 5.1 kg |
Type | Water Pump, engine cooling |
Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Right |
Additional Information | with rubber mounts, with lock nut |
Material | Sheet Steel |
Additional Information 2 | with ball joint |
Steering arm type | Control Arm |
Paired article numbers | 184530 |
Weight | 6.864 kg |
Cone Size | 16 mm |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Cone Size 2 | 24 mm |
External Thread Size | M16 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Repair Kit, guide strut |
Type | Repair Kit, guide strut |
Weight | 2.158 kg |
Length | 150 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Right |
Transmission-side joint diameter | 108 mm |
Type | Drive Shaft |
Function | Drive Shaft |
Wheel Sided Joint Diameter | 98 mm |
Min. Length | 608 mm |
Number of mounting bores | 6 |
Weight | 6.830 kg |
External Teeth, Wheel Side | 36 |
Bore Diameter | 10.5 mm |
Bolt Hole Circle Diameter | 94 mm |
Thread Size | M16x1,5 |
Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Drive Shaft |
Type | Drive Shaft |
Weight | 7.760 kg |
External Teeth, Diff.Side | 37 |
External Teeth, Wheel Side | 27 |
Thread Size | M24x1,5 |
Additional Information 2 | with nut |
Placement on Vehicle | Front Axle Left |
Transmission-side joint diameter | 89 mm |
Min. Length | 640 mm |
Wheel Sided Joint Diameter | 98 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Replaces | 43701 |
Material | Rubber/Metal |
Bearing/Mounting Type | Hydro Mount |
Function | Mounting, engine |
Placement on Vehicle | Left |
Weight | 1.45 kg |
Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Width of castor bearing surface | 32 mm |
Weight | 1.657 kg |
Width | 82 mm |
Material | Metal |
Outer diameter | 75 mm |
Mounting points diameter | 10 mm |
Type | Belt Tensioner, V-ribbed belt |
Function | Belt Tensioner, V-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with fuel sender unit |
Operating Mode | Electric |
Number of Connectors / Ports | 4 |
Weight | 0.82 kg |
Type | Fuel Feed Unit |
Function | Fuel Feed Unit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Right |
Weight | 1.230 kg |
Bearing/Mounting Type | Vacuum controlled hydro mount |
Type | Mounting, engine |
Function | Mounting, engine |
Paired article numbers | 197528 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Sensor, crankshaft pulse |
Number of Connectors / Ports | 3 |
Weight | 0.070 kg |
Type | Sensor, crankshaft pulse |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Water Pump, engine cooling |
Function | Water Pump, engine cooling |
Water pump impeller material | Metal |
Seal Material | Rubber |
Material | Cast Aluminium |
Additional Information 2 | with seal ring |
Weight | 0.84 kg |
Number of Wings | 6 |
for OE number | 16100-09310 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.028 kg |
Outer diameter | 76 mm |
Operating Mode | Automatic |
Type | Belt Tensioner, v-ribbed belt |
Housing material | Aluminium |
Function | Belt Tensioner, v-ribbed belt |
Track rollers material | Metal |
Width of castor bearing surface | 24 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle |
Outer diameter | 326 mm |
Thickness | 47 mm |
Brake Disc Thickness | 25 mm |
Minimum thickness | 23 mm |
Bolt Hole Circle Diameter | 114.3 mm |
Centering Diameter | 68 mm |
Surface | Coated |
Weight | 9.2 kg |
Rim Hole Number | 5 -Hole |
Type | Brake Disc Rotor |
Function | Brake Disc |
Rotor Style | internally vented |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle |
Length | 220 mm |
Thread Size | M38 x 1,5 |
Paired article numbers | 196585 |
Bore Diameter | 24.4 mm |
Weight | 3.009 kg |
Type | Tie Rod End |
Function | Tie Rod End |
Thread Type | with right-hand thread |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle |
Length | 220 mm |
Thread Size | M38 x 1,5 LHT |
Paired article numbers | 196584 |
Bore Diameter | 24.4 mm |
Weight | 3.009 kg |
Type | Tie Rod End |
Function | Tie Rod End |
Thread Type | with left-hand thread |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.503 kg |
Core Depth | 12 mm |
Additional Information 2 | with dryer |
Refrigerant | R 134a |
Core Width | 645 mm |
Core Length | 336 mm |
Function | Condenser, air conditioning |
Type | Condenser, air conditioning |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Front Axle Right |
Function | Mounting, control/trailing arm |
Weight | 2.25 kg |
Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 4x Febi Mounting, control/trailing arm (26932)
- 4x Febi Mounting, control/trailing arm (26933)
- 2x Febi Mounting, control/trailing arm (27015)
- 2x Febi Mounting, control/trailing arm (32116)
- 2x Febi Mounting, control/trailing arm (44400)
Important compatibility info
Combi Switch Function | with high beam function, with indicator function, with wipe-wash function |
Function | Steering Column Switch |
Number of Connectors / Ports | 6 |
Weight | 0.140 kg |
Type | Steering Column Switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Mounting, engine |
Type | Mounting, engine |
Bearing/Mounting Type | Hydro Mount |
for OE number | 238 240 20 00 |
Weight | 1.400 kg |
Placement on Vehicle | Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023