Proud to be a UK-based company
Contact us
Important compatibility info
| Function | Ignition Coil |
| Number of Connectors / Ports | 6 |
| Ignition Coil | 4 Spark |
| Weight | 0.80 kg |
| Type | Ignition Coil |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£82.95
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Thread Size | M27x1,5 |
| Bolt Hole Circle Diameter | 94 mm |
| Bore Diameter | 10.5 mm |
| External Teeth, Wheel Side | 30 |
| Weight | 7.630 kg |
| Number of mounting bores | 6 |
| Min. Length | 651 mm |
| Wheel Sided Joint Diameter | 94 mm |
| Transmission-side joint diameter | 108 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£82.95
Important compatibility info
| Length | 290 mm |
| Outer diameter | 53 mm |
| Additional Information 2 | with pressure switch (high pressure side), with pressure switch (low pressure side), with pressure switch |
| Number of Connectors / Ports | 3 |
| Weight | 0.8 kg |
| Number of mounting bores | 2 |
| Mounting points diameter | 10 mm |
| Type | Dryer, air conditioning |
| Function | Dryer, air conditioning |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£82.95
Important compatibility info
| Thread Size | M10x1,5 |
| Additional Information 2 | with screw |
| Weight | 7.506 kg |
| External Teeth, Diff.Side | 26 |
| Min. Length | 943 mm |
| Wheel Sided Joint Diameter | 82 mm |
| External Teeth, Wheel Side | 36 |
| Function | Drive Shaft |
| Type | Drive Shaft |
| Transmission-side joint diameter | 82 mm |
| Placement on Vehicle | Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£82.95
Important compatibility info
| Piston conrod diameter | 10 mm |
| Type | Gas Spring, boot/cargo area |
| Function | Gas Spring, boot/cargo area |
| Weight | 0.3 kg |
| Length | 316 mm |
| Eject Force | 2010 N |
| Housing Diameter | 35 mm |
| Stroke | 71 mm |
| Mounting points diameter | 19 mm |
| Housing length | 195 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£82.95
Important compatibility info
| Weight | 0.885 kg |
| Outer diameter | 70 mm |
| Operating Mode | Automatic |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Plastic |
| Type | Belt Tensioner, v-ribbed belt |
| Width of castor bearing surface | 26 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£82.95
Important compatibility info
| Placement on Vehicle | Front |
| Operating Mode | Pneumatic |
| Shock Absorber Mounting Type | Bottom eye, Top pin |
| Max. Length | 384 mm |
| Min. Length | 272 mm |
| Pipe Diameter | 34 mm |
| Piston conrod diameter | 20 mm |
| Function | Shock Absorber, driver cab suspension |
| Weight | 2.13 kg |
| External Thread Size | M12 x 1,75 |
| Type | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£82.95
Important compatibility info
| Rated Power | 1.7 kW |
| Weight | 3.76 kg |
| Number of Teeth | 10 |
| Type | Starter |
| Voltage | 12 V |
| Function | Starter |
| for OE number | 02E 911 023 HX |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£82.95
Important compatibility info
| External Thread Size | M12 x 1,5 |
| Type | Shock Absorber, driver cab suspension |
| Function | Shock Absorber, driver cab suspension |
| Mounting points diameter | 50 mm. 14 mm |
| Piston conrod diameter | 13 mm |
| Min. Length | 286 mm |
| Pipe Diameter | 48 mm |
| Operating Mode | Mechanical |
| Placement on Vehicle | Front |
| Max. Length | 346 mm |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Weight | 1.5 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£82.95
Important compatibility info
| Internal Thread Size | M30 x 1,5 RHT |
| Weight | 9.005 kg |
| Placement on Vehicle | Front Axle |
| Length | 966 mm |
| Outer diameter | 50 mm |
| Rod/Strut | Push Rod |
| Cone Size | 30 mm |
| Function | Centre Rod Assembly |
| Driver Position | for left-hand/right-hand drive vehicles |
| Extra Description | ProKit |
| Type | Centre Rod Assembly |
| External Thread Size | M24 x 1,5 |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£82.95
Important compatibility info
| Rod/Strut | Push Rod |
| Length | 1490 mm |
| Additional Information 2 | with crown nut |
| Pipe Diameter | 38 mm |
| Cone Size | 26 mm |
| Extra Description | ProKit |
| Function | Tie Rod |
| Type | Tie Rod |
| Replaces | 24002 |
| Internal Thread Size | M30 x 1,5 LHT, M30 x 1,5 RHT |
| External Thread Size | M20 x 1,5 |
| Outer diameter | 38 mm |
| Placement on Vehicle | Front Axle |
| Weight | 9.660 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£82.95
Important compatibility info
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Plastic |
| Operating Mode | Automatic |
| Width of castor bearing surface | 40 mm |
| Weight | 1.902 kg |
| for OE number | 906 200 43 70 |
| Outer diameter | 75 mm |
| Type | Belt Tensioner, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£82.95
Important compatibility info
| Cone Size | 30 mm |
| Pipe Diameter | 36 mm |
| Function | Centre Rod Assembly |
| Weight | 5.45 kg |
| Placement on Vehicle | Front Axle |
| Length | 860 mm |
| Width | 62 mm |
| Thickness | 115 mm |
| Rod/Strut | Push Rod |
| External Thread Size | M24 x 1,5 |
| Extra Description | ProKit |
| Internal Thread Size | M30 x 1,5 |
| Type | Centre Rod Assembly |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£82.95
Important compatibility info
| Transmission-side joint diameter | 92.5 mm |
| External Teeth, Diff.Side | 31 |
| Min. Length | 542 mm |
| Wheel Sided Joint Diameter | 92.2 mm |
| Function | Drive Shaft |
| Type | Drive Shaft |
| Additional Information 2 | with screw |
| Thread Size | M10x1,5 |
| External Teeth, Wheel Side | 40 |
| Weight | 7.078 kg |
| Placement on Vehicle | Front Axle Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£82.95
Important compatibility info
| Weight | 8.265 kg |
| Pipe Diameter | 42 mm |
| Function | Centre Rod Assembly |
| Internal Thread Size | M30 x 1,5 RHT |
| External Thread Size | M24 x 1,5 |
| Length | 863 mm |
| Width | 42 mm |
| Thickness | 42 mm |
| Rod/Strut | Push Rod |
| Cone Size | 30 mm |
| Placement on Vehicle | Front Axle |
| Driver Position | for left-hand/right-hand drive vehicles |
| Extra Description | ProKit |
| Type | Centre Rod Assembly |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£82.95
Important compatibility info
| Weight | 3.43 kg |
| Placement on Vehicle | Front |
| Operating Mode | Pneumatic |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 420 mm |
| Min. Length | 315 mm |
| Pipe Diameter | 82 mm. 44 mm |
| Mounting points diameter | 20 mm. 32 mm |
| Piston conrod diameter | 13 mm |
| Function | Shock Absorber, driver cab suspension |
| External Thread Size | M6 x 1 |
| Type | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£82.95
Important compatibility info
| Length | 550 mm |
| Width | 250 mm |
| Material | Metal |
| Thickness | 1.4 mm |
| Function | Gasket, cylinder head |
| Weight | 0.421 kg |
| Type | Gasket, cylinder head |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£82.95
Important compatibility info
| Weight | 0.717 kg |
| Function | Cylinder Head Gasket Set, air compressor |
| Type | Cylinder Head Gasket Set, air compressor |
| Additional Information 2 | with bolts/screws |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£82.95
Important compatibility info
| Weight | 0.303 kg |
| Function | Gasket Set, automatic transmission |
| Extra Description | febi Plus |
| Type | Gasket Set, automatic transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£82.95
Important compatibility info
| Voltage | 12 V |
| Function | Starter |
| Number of Teeth | 9 |
| Rated Power | 1.8 kW |
| Weight | 3.59 kg |
| Type | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£82.95
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023