Important compatibility info
Weight | 1.7 kg |
Placement on Vehicle | Rear |
Operating Mode | Pneumatic |
Shock Absorber Mounting Type | Top eye, Bottom eye |
Max. Length | 310 mm |
Min. Length | 224 mm |
Pipe Diameter | 38 mm. 52 mm |
Mounting points diameter | 12 mm |
Piston conrod diameter | 12.5 mm |
Function | Shock Absorber, driver cab suspension |
Replaces | 45924 |
Type | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.160 kg |
Type | Cable Pull, manual transmission |
Function | Cable Pull, manual transmission |
Inner length 1 | 1275 mm |
Inner length 2 | 1596 mm |
Outer length 1 | 1621 mm |
Outer length 2 | 1885 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 3.8 kg |
Placement on Vehicle | Left Front |
Operating Mode | Electric |
Paired article numbers | 106302 |
Type | Window Regulator |
Function | Window Regulator |
Additional Information | with electric motor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Centre Rod Assembly |
Cone Size | 31.5 mm |
Driver Position | for right-hand drive vehicles |
Rod/Strut | Push Rod |
Outer diameter | 50 mm |
Length | 823 mm |
Weight | 8.3 kg |
Pipe Diameter | 50 mm |
Extra Description | ProKit |
External Thread Size | M24 x 1,5, M30 x 1,5 |
Type | Centre Rod Assembly |
Additional Information | with castellated nut and split pins |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.633 kg |
Function | Chain Kit, oil pump drive |
Timing Chain Size | G53HP |
Chain Type | Simplex, Closed chain |
Number of Chain Links | 52 |
Type | Chain Kit, oil pump drive |
for OE number | 11 27 7 500 502 S1 |
Extra Description | Full Kit |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Chain, oil pump drive (32545)
- 1x Febi Rail, oil pump drive chain (32411)
- 1x Febi Nut (47977)
- 1x Febi Sprocket/Gear, oil pump (47976)
- 1x Febi Chain Tensioner, oil pump drive (21277)
- 1x Febi Sprocket, crankshaft (30458)
Important compatibility info
Weight | 0.236 kg |
Number of Connectors / Ports | 5 |
Combi Switch Function | with wash function, with indicator function, with high beam function, with wipe interval function |
Type | Steering Column Switch |
Function | Steering Column Switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.27 kg |
Chain Type | Duplex, Closed chain |
Number of Chain Links | 168 |
Timing Chain Size | D67ZN |
Function | Timing Chain |
Additional Information 2 | Requires special tools for mounting |
Type | Timing Chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.7 kg |
Length | 227 mm |
Material | Plastic |
Outer diameter | 147 mm |
Colour | White |
Number of Connectors / Ports | 2 |
Rated Power | 195 W |
Function | Interior Blower |
Type | Interior Blower |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Operating Mode | Pneumatic |
Placement on Vehicle | Front |
Weight | 2.77 kg |
Function | Shock Absorber, driver cab suspension |
Min. Length | 254 mm |
External Thread Size | M12 x 1,5 |
Max. Length | 353 mm |
Mounting points diameter | 14 mm. 25 mm |
Type | Shock Absorber, driver cab suspension |
Shock Absorber Mounting Type | Top eye, Bottom eye |
Piston conrod diameter | 15 mm |
Replaces | 19560 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with gasket/seal |
Material | Cast Aluminium |
Weight | 0.84 kg |
Number of Wings | 7 |
Type | Water Pump, engine cooling |
Function | Water Pump, engine cooling |
Water pump impeller material | Metal |
Additional Information
Technical Information
To identify the correct article, the currently installed product must be determined!
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Connectors / Ports | 2 |
Weight | 0.875 kg |
Type | Hydraulic Hose, steering |
Function | Hydraulic Hose, steering |
Inner diameter 1 | 14 mm |
Inner diameter 2 | 16 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | with bolts/screws |
Weight | 2.780 kg |
Parameter | 7PK |
Width | 26 mm |
Outer diameter | 168 mm |
Inner diameter | 59 mm |
Number of Ribs | 6 |
Function | Belt Pulley, crankshaft |
Extra Description | ProKit |
Type | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Belt Pulley, crankshaft (31212)
Important compatibility info
Type | Connecting Cable, injector |
Function | Connecting Cable, injector |
Extra Description | febi Plus |
Weight | 0.086 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.14 kg |
Colour | Black |
Number of Connectors / Ports | 4 |
Combi Switch Function | with wipe-wash function, with rear wipe-wash function, with wipe interval function |
Type | Steering Column Switch |
Function | Steering Column Switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Pressure | 7 bar |
Type | Oil Pump |
Function | Oil Pump |
Weight | 1.2 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Connectors / Ports | 8 |
Combi Switch Function | with light dimmer function |
Function | Switch, headlight |
Type | Switch, headlight |
Weight | 0.160 kg |
Control Type | Rotary Operation |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.605 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Capacity | 0.385 l |
Function | Pressure Accumulator, pneumatic suspension |
Pressure | 52 bar |
External Thread Size | M36 x 1,5 |
Type | Pressure Accumulator, pneumatic suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.15 kg |
Width | 24 mm |
Number of Teeth | 190 |
Function | Water Pump & Timing Belt Kit |
Belts | with trapezoidal tooth profile |
Type | Water Pump & Timing Belt Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt Kit (23655)
- 1x Febi Water Pump, engine cooling (14229)
Important compatibility info
Rim Hole Number | 6 -Hole |
Weight | 7.875 kg |
Placement on Vehicle | Rear Axle |
Outer diameter | 266 mm |
Thickness | 82 mm |
Brake Disc Thickness | 24 mm |
Minimum thickness | 22 mm |
Bolt Hole Circle Diameter | 170 mm |
Centering Diameter | 142.5 mm |
Surface | Coated |
Type | Brake Disc Rotor |
Function | Brake Disc |
Rotor Style | Internally Vented |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Transmission-side joint diameter | 79 mm |
Type | Drive Shaft |
Function | Drive Shaft |
Weight | 6.376 kg |
Placement on Vehicle | Front Axle Left |
Additional Information 2 | with nut |
External Teeth, Diff.Side | 20 |
Min. Length | 650 mm |
ABS Ring Diameter | 80 mm |
Wheel Sided Joint Diameter | 83 mm |
Thread Size | M22x1,5 |
External Teeth, Wheel Side | 26 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Rated Power | 0.9 kW |
Weight | 2.84 kg |
Function | Starter |
Voltage | 12 V |
Number of Teeth | 9 |
Type | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Teeth | 12 |
for OE number | 82 00 584 685 |
Voltage | 12 V |
Rated Power | 1.4 kW |
Weight | 3.05 kg |
Type | Starter |
Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.280 kg |
Bearing/Mounting Type | Hydro Mount |
Function | Mounting, engine |
Placement on Vehicle | Front |
Internal Thread Size | M10 x 1,25 |
Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Starter |
Rated Power | 1.1 kW |
Function | Starter |
Voltage | 12 V |
Number of Teeth | 9 |
Weight | 2.86 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Connectors / Ports | 2 |
Cable Length | 600 mm |
Spanner Size | 17 |
Function | Sensor, exhaust gas temperature |
Weight | 0.052 kg |
External Thread Size | M14 x 1,5 |
Type | Sensor, exhaust gas temperature |
for OE number | 21542714 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear, Left, Right |
Weight | 2.496 kg |
Bearing/Mounting Type | Rubber-Metal Mount |
Type | Mounting, engine |
Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Brake Disc |
Rotor Style | Internally Vented |
Placement on Vehicle | Front Axle |
Outer diameter | 316 mm |
Thickness | 50 mm |
Brake Disc Thickness | 28 mm |
Minimum thickness | 25 mm |
Bolt Hole Circle Diameter | 108 mm |
Centering Diameter | 68 mm |
Surface | Coated |
Weight | 9.0 kg |
Rim Hole Number | 5 -Hole |
Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Thermostat, coolant |
Material | Cast Aluminium |
Number of Connectors / Ports | 2 |
Opening Temperature | 90 °C |
Weight | 0.36 kg |
Type | Thermostat, coolant |
Additional Information | with temperature sensor, with gasket/seal |
for OE number | 31293698 |
Housing Type | with housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with electric motor |
Material | Cast Iron |
Brake Caliper Type | Brake Caliper (1 piston) |
Vehicle Equipment | for vehicles with electric parking brake |
Brake caliper piston diameter | 41 mm |
Function | Brake Caliper |
Type | Brake Caliper |
Weight | 2.9 kg |
Paired article numbers | 183209 |
Placement on Vehicle | Rear Axle Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Brake caliper piston diameter | 43 mm |
Vehicle Equipment | for vehicles with electric parking brake |
Function | Brake Caliper |
Material | Cast Iron |
Brake Caliper Type | Brake Caliper (1 piston) |
Paired article numbers | 182709 |
Weight | 3.2 kg |
Type | Brake Caliper |
Placement on Vehicle | Rear Axle Left |
Additional Information | with electric motor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Brake caliper piston diameter | 43 mm |
Function | Brake Caliper |
Type | Brake Caliper |
Weight | 3.2 kg |
Vehicle Equipment | for vehicles with electric parking brake |
Placement on Vehicle | Rear Axle Right |
Additional Information | with electric motor |
Material | Cast Iron |
Brake Caliper Type | Brake Caliper (1 piston) |
Paired article numbers | 182708 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Spring-loaded Cylinder |
Brake Type | Disc Brake |
Stroke | 64 mm |
Weight | 6.9 kg |
Distance of fastening bolts | 120 mm |
Piston Rod Length | 15 mm |
Internal Thread Size | M16 x 1,5 |
Type | Spring-loaded Cylinder |
Additional Information | with fastening/mounting material |
Parameter | Typ 20 / 24 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Thickness | 93 mm |
Brake Disc Thickness | 34 mm |
Brake Disc Type | Internally Vented |
Minimum thickness | 26 mm |
Bolt Hole Circle Diameter | 122 mm |
Surface | Coated |
Number of Holes | 10 |
Mounting points diameter | 15 mm |
Function | Brake Disc |
Placement on Vehicle | Front Axle |
Weight | 16.7 kg |
Outer diameter | 335 mm |
Type | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Right, Upper |
Bearing/Mounting Type | Rubber-Metal Mount |
Weight | 1.078 kg |
Type | Mounting, engine |
Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Right, Upper |
Length | 278 mm |
Material | Aluminium |
Additional Information 2 | with ball joint |
Steering arm type | Control Arm |
Paired article numbers | 185202 |
Weight | 1.542 kg |
Cone Size | 21 mm |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Camber correction | 0.5 ° |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | with nut |
Wheel Sided Joint Diameter | 98 mm |
Additional Information | with Split Pin |
Placement on Vehicle | Front Axle Right |
Transmission-side joint diameter | 88.9 mm |
Type | Drive Shaft |
Thread Size | M24 x 2,0 |
Weight | 11.410 kg |
External Teeth, Wheel Side | 28 |
Min. Length | 1060 mm |
External Teeth, Diff.Side | 36 |
Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 4.396 kg |
Placement on Vehicle | Left, Steering arm side |
Length | 222.5 mm |
Outer diameter | 50 mm |
Type | Repair Kit, kingpin |
Function | Repair Kit, kingpin |
Extra Description | ProKit |
Additional Information 2 | with bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Kingpin (35012)
- 2x Febi Lock Ring, steering knuckle (35014)
- 4x Febi Bush, steering knuckle (08524)
- 2x Febi Circlip (05370)
- 2x Febi Seal Ring, steering knuckle (05868)
- 1x Febi Bush, steering knuckle (15890)
Important compatibility info
Rotor Style | Solid |
Placement on Vehicle | Front Axle |
Outer diameter | 258 mm |
Thickness | 92 mm |
Brake Disc Thickness | 16 mm |
Minimum thickness | 13 mm |
Bolt Hole Circle Diameter | 112 mm |
Centering Diameter | 45 mm |
Surface | Coated |
Function | Brake Disc |
Weight | 8.737 kg |
Rim Hole Number | 5 -Hole |
Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.35 kg |
Voltage | 24 V |
Operating Mode | Electric-pneumatic |
Number of Connectors / Ports | 2 |
Rated Power | 9 W |
Valve type | Solenoid Valve |
Pressure | 15 bar |
Function | Solenoid Valve |
Type | Solenoid Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 120 mm |
Width | 105 mm. 80 mm |
Inner diameter | 6.5 mm |
Function | Pump, fuel pre-supply |
Weight | 1.184 kg |
Internal Thread Size | M14 x 1,5 |
Type | Pump, fuel pre-supply |
Additional Information | with gaskets/seals |
Additional Information 2 | with pre-filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Core Length | 164 mm |
Core Width | 179 mm |
Weight | 0.49 kg |
Additional Information | with gasket/seal |
Type | Heat Exchanger, interior heating |
Function | Heat Exchanger, interior heating |
Core Depth | 26 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Front Axle Right |
Shock Absorber Type | Gas Pressure |
Shock Absorber Design | Suspension Strut |
Weight | 5.210 kg |
Shock Absorber Mounting Type | Top pin |
Type | Shock Absorber |
Function | Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Right Rear |
Additional Information | with adjuster |
Paired article numbers | 197581 |
Number of Connectors / Ports | 6 |
Weight | 0.9 kg |
Type | Door Lock |
Function | Door Lock |
Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Front Axle Right |
Shock Absorber Type | Gas Pressure |
Shock Absorber System | Twin-Tube |
Shock Absorber Design | Suspension Strut |
Weight | 5.210 kg |
Shock Absorber Mounting Type | Top pin, bottom steering knuckle |
Max. Length | 575 mm |
Min. Length | 384 mm |
Pipe Diameter | 58 mm. 57.5 mm |
Piston conrod diameter | 25 mm |
Type | Shock Absorber |
Function | Shock Absorber |
External Thread Size | M12 x 1,75 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Bore Diameter | 20 mm. 12 mm |
Shock Absorber Type | Gas Pressure |
Shock Absorber System | Twin-Tube |
Shock Absorber Design | Telescopic Shock Absorber |
Weight | 2.490 kg |
Shock Absorber Mounting Type | Top eye, Bottom eye |
Mounting bores distance | 602 mm |
Max. Length | 602 mm |
Min. Length | 371 mm |
Pipe Diameter | 63 mm. 53 mm |
Type | Shock Absorber |
Function | Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.510 kg |
Placement on Vehicle | Rear Axle |
Width | 38 mm |
Outer diameter | 203 mm |
Inspection Tag | ECE R90 Approved |
Mounting Type | Pre-assembled |
Function | Brake Shoe Set |
Piston Diameter | 22.2 mm |
Type | Brake Shoe Set |
Additional Information | with wheel brake cylinder, with accessories, with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Right |
Additional Information 2 | with nut |
Thread Size | M18x1,5 |
External Teeth, Wheel Side | 25 |
Weight | 5.653 kg |
External Teeth, Diff.Side | 22 |
Min. Length | 883 mm |
Wheel Sided Joint Diameter | 49 mm |
Transmission-side joint diameter | 69 mm |
Type | Drive Shaft |
Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.100 kg |
Width | 30 mm |
Number of Teeth | 120 |
Surface | Coated |
Function | Timing Belt Kit |
Belts | with rounded tooth profile |
Type | Timing Belt Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt (19540)
- 1x Febi Tensioner Pulley, timing belt (21706)
- 1x Febi Deflection Pulley/Guide Pulley, timing belt (21708)
- 1x Febi Mounting Set, tension/deflection pulley (timing belt) (178790)
Important compatibility info
Piston conrod diameter | 22 mm |
Weight | 4.400 kg |
Shock Absorber Type | Gas Pressure |
External Thread Size | M12 x 1,25 |
Bore Diameter | 14 mm |
Max. Length | 526 mm |
Placement on Vehicle | Front Axle Right, Front Axle Left |
Shock Absorber System | Twin-Tube |
Shock Absorber Mounting Type | Top pin, Bottom Clamp |
Shock Absorber Design | Suspension Strut |
Function | Shock Absorber |
Type | Shock Absorber |
Pipe Diameter | 51 mm |
Min. Length | 355 mm |
Mounting bores distance | 75 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Air Suspension Valve |
Type | Air Suspension Valve |
Weight | 0.23 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023