Proud to be a UK-based company
Contact us
Important compatibility info
| Voltage | 12 V |
| Number of Teeth | 10 |
| Rated Power | 1.4 kW |
| Weight | 2.925 kg |
| Type | Starter |
| Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£80.97
Important compatibility info
| Weight | 0.690 kg |
| Additional Information | with seal rings |
| Material | Aluminium |
| Function | Oil Cooler, automatic transmission |
| Transmission Type | Automatic Transmission |
| Type | Oil Cooler, automatic transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Oil Cooler, automatic transmission (100123)
- 2x Febi Seal Ring, oil cooler (lubrication) (100122)
£80.97
Important compatibility info
| Pipe Diameter | 52.7 mm |
| Function | Centre Rod Assembly |
| Length | 904 mm |
| Rod/Strut | Push Rod |
| Weight | 9.982 kg |
| Cone Size | 32.2 mm |
| External Thread Size | M27 x 1,5 |
| Internal Thread Size | M30 x 1,5 RHT |
| Type | Centre Rod Assembly |
| Replaces | 28280 |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£80.97
Important compatibility info
| Function | Camshaft |
| Type | Camshaft |
| Placement on Vehicle | Exhaust Side |
| Weight | 2.365 kg |
| for OE number | 1763.70 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£80.97
Important compatibility info
| Placement on Vehicle | Front Axle |
| Width | 109 mm |
| Outer diameter | 85 mm |
| Additional Information 2 | with integrated magnetic sensor ring, with ABS sensor ring |
| Function | Wheel Bearing Kit |
| Inner diameter | 30 mm |
| Weight | 3.715 kg |
| Bearing Type | Angular Ball Bearing |
| Type | Wheel Bearing Kit |
| Sealing lip material | NBR (nitrile butadiene rubber) |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£80.97
Important compatibility info
| Weight | 3.685 kg |
| Length | 1318 mm |
| Rod/Strut | Push Rod |
| Cone Size | 16 mm |
| Type | Centre Rod Assembly |
| Function | Centre Rod Assembly |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£80.97
Important compatibility info
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 106 |
| Function | Timing Chain Kit |
| Weight | 0.840 kg |
| Timing Chain Size | G68V |
| Type | Timing Chain Kit |
| Additional Information | with chain tensioner, with slide rails |
| Extra Description | Basic Short Kit |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (09364)
- 1x Febi Tensioner, timing chain (09221)
- 1x Febi Guide, timing chain (30382)
- 1x Febi Guide, timing chain (30383)
£80.97
Important compatibility info
| Weight | 5.140 kg |
| Min. Length | 331 mm |
| Pipe Diameter | 52 mm |
| Mounting points diameter | 16 mm |
| Piston conrod diameter | 15 mm |
| Function | Shock Absorber, driver cab suspension |
| External Thread Size | M16 x 2 |
| Max. Length | 381 mm |
| Shock Absorber Mounting Type | Top pin, Bottom eye |
| Operating Mode | Mechanical |
| Placement on Vehicle | Rear |
| Type | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£80.97
Important compatibility info
| Weight | 8.1 kg |
| Placement on Vehicle | Front Axle |
| Length | 787 mm |
| Outer diameter | 40 mm |
| Rod/Strut | Push Rod |
| Cone Size | 26 mm |
| Function | Centre Rod Assembly |
| Internal Thread Size | M30 x 1,5 RHT |
| Extra Description | ProKit |
| External Thread Size | M20 x 1,5 |
| Type | Centre Rod Assembly |
| Additional Information | with castellated nut and split pins |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£80.97
Important compatibility info
| Operating Mode | Mechanical |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Min. Length | 316 mm |
| Max. Length | 379 mm |
| Pipe Diameter | 41.5 mm |
| Mounting points diameter | 12 mm |
| Piston conrod diameter | 40 mm |
| Function | Shock Absorber, driver cab suspension |
| Paired article numbers | 176295 |
| Placement on Vehicle | Front |
| Weight | 3.84 kg |
| Type | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£80.97
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023