Important compatibility info
Voltage | 12 V |
Number of Teeth | 10 |
Rated Power | 1.1 kW |
Weight | 4.0 kg |
for OE number | 02M 911 023 G |
Type | Starter |
Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with gasket/seal, with fastening/mounting material |
Type | Heat Exchanger, interior heating |
Function | Heat Exchanger, interior heating |
Core Depth | 32 mm |
Core Length | 164 mm |
Core Width | 210 mm |
Weight | 0.626 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Parts Set, maintenance service |
Type | Parts Set, maintenance service |
Weight | 5.573 kg |
Material | FPM (fluoride rubber) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Fuel filter (31431)
- 1x Febi Oil Filter (27797)
- 1x Febi Gasket, centrifugal cleaner flange (35616)
- 1x Febi Seal Ring, oil drain plug (35640)
- 2x Febi Seal, oil filter housing (35618)
- 2x Febi Oil Filter, manual transmission (38975)
- 1x Febi Air Dryer Cartridge, compressed-air system (35304)
- 1x Febi Filter, cabin air (22095)
- 1x Febi Gasket, centrifugal cleaner flange (35622)
Important compatibility info
Pipe Diameter | 52.7 mm |
Function | Centre Rod Assembly |
Length | 904 mm |
Rod/Strut | Push Rod |
Weight | 9.982 kg |
Cone Size | 32.2 mm |
External Thread Size | M27 x 1,5 |
Internal Thread Size | M30 x 1,5 RHT |
Type | Centre Rod Assembly |
Replaces | 28280 |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Camshaft |
Weight | 1.8 kg |
Type | Camshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 5.140 kg |
Min. Length | 331 mm |
Pipe Diameter | 52 mm |
Mounting points diameter | 16 mm |
Piston conrod diameter | 15 mm |
Function | Shock Absorber, driver cab suspension |
External Thread Size | M16 x 2 |
Max. Length | 381 mm |
Shock Absorber Mounting Type | Top pin, Bottom eye |
Operating Mode | Mechanical |
Placement on Vehicle | Rear |
Type | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 6.300 kg |
Type | Tie Rod |
Cone Size | 22 mm |
Pipe Diameter | 36 mm |
Length | 1594 mm |
Placement on Vehicle | Front Axle |
Additional Information 2 | with crown nut |
External Thread Size | M18 x 1,5 |
Function | Tie Rod |
Extra Description | ProKit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Exhaust Side |
Function | Camshaft |
Weight | 1.5 kg |
Type | Camshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Chain Type | Simplex, Closed chain |
Number of Chain Links | 106 |
Function | Timing Chain Kit |
Weight | 0.840 kg |
Timing Chain Size | G68V |
Type | Timing Chain Kit |
Additional Information | with chain tensioner, with slide rails |
Extra Description | Basic Short Kit |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (09364)
- 1x Febi Tensioner, timing chain (09221)
- 1x Febi Guide, timing chain (30382)
- 1x Febi Guide, timing chain (30383)
Important compatibility info
Seal Material | Rubber |
Water pump impeller material | Plastic |
Number of Wings | 6 |
Type | Water Pump, engine cooling |
Function | Water Pump, engine cooling |
Material | Cast Aluminium |
Weight | 0.570 kg |
Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Valve, crankcase ventilation |
Weight | 0.32 kg |
Function | Valve, crankcase ventilation |
Replaces | 103482 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Operating Mode | Mechanical |
Shock Absorber Mounting Type | Top eye, Bottom eye |
Min. Length | 316 mm |
Max. Length | 379 mm |
Pipe Diameter | 41.5 mm |
Mounting points diameter | 12 mm |
Piston conrod diameter | 40 mm |
Function | Shock Absorber, driver cab suspension |
Paired article numbers | 176295 |
Placement on Vehicle | Front |
Weight | 3.84 kg |
Type | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.1 kg |
Placement on Vehicle | Rear |
Length | 1915 mm. 745 mm |
Function | Cable Pull, parking brake |
Type | Cable Pull, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Connectors / Ports | 9 |
Weight | 0.164 kg |
Type | Control Unit, glow time |
Function | Control Unit, glow time |
Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 8.1 kg |
Placement on Vehicle | Front Axle |
Length | 787 mm |
Outer diameter | 40 mm |
Rod/Strut | Push Rod |
Cone Size | 26 mm |
Function | Centre Rod Assembly |
Internal Thread Size | M30 x 1,5 RHT |
Extra Description | ProKit |
External Thread Size | M20 x 1,5 |
Type | Centre Rod Assembly |
Additional Information | with castellated nut and split pins |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle, from 1st idler arm to the 2nd idler arm |
Length | 628 mm |
Additional Information | with castellated nut and split pins |
Rod/Strut | Push Rod |
Weight | 5.65 kg |
Cone Size | 30 mm |
Pipe Diameter | 40 mm |
Type | Centre Rod Assembly |
Function | Centre Rod Assembly |
Extra Description | ProKit |
External Thread Size | M24 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 3.832 kg |
Type | Release Fork, clutch |
Function | Release Fork, clutch |
Additional Information | with bush, with fastening/mounting material |
for OE number | 2 692 141 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Thickness | 47 mm |
Brake Disc Thickness | 28 mm |
Centering Diameter | 64.1 mm |
Surface | Coated |
Bolt Hole Circle Diameter | 114.3 mm |
Minimum thickness | 26 mm |
Number of mounting bores | 2 |
Rim Hole Number | 5 -Hole |
Type | Brake Disc Rotor |
Function | Brake Disc |
Rotor Style | Internally Vented |
Weight | 9.0 kg |
Outer diameter | 320 mm |
Placement on Vehicle | Front Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | EGR Valve |
Weight | 0.68 kg |
Type | EGR Valve |
Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Hole Spacing | 90 mm |
Function | Brake Master Cylinder |
Weight | 0.53 kg |
for OE number | 004 430 75 01 |
Type | Brake Master Cylinder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023