Important compatibility info
Weight | 1.073 kg |
Placement on Vehicle | Lower |
Chain Type | Simplex, Closed chain |
Number of Chain Links | 104 |
Function | Timing Chain Kit |
Type | Timing Chain Kit |
for OE number | 11 31 1 432 176 S2 |
Timing Chain Size | G68V-1, G68VCO |
Replaces | 30409 |
Additional Information | with slide rails, with chain tensioner |
Extra Description | Basic Short Kit |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (15547)
- 1x Febi Guide, timing chain (11728)
- 1x Febi Guide, timing chain (25326)
- 1x Febi Piston, timing chain tensioner (30416)
- 1x Febi Spring (30412)
- 1x Febi Seal Ring, timing chain tensioner (30413)
- 1x Febi Tensioner, timing chain (30417)
Important compatibility info
Function | Centre Rod Assembly |
Cone Size | 31.5 mm |
Driver Position | for right-hand drive vehicles |
Rod/Strut | Push Rod |
Outer diameter | 50 mm |
Length | 823 mm |
Weight | 8.3 kg |
Pipe Diameter | 50 mm |
Extra Description | ProKit |
External Thread Size | M24 x 1,5, M30 x 1,5 |
Type | Centre Rod Assembly |
Additional Information | with castellated nut and split pins |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Cone Size | 28.6 mm |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Pipe Diameter | 40 mm |
Width | 40 mm |
Thickness | 115 mm |
Length | 743 mm |
Weight | 7.05 kg |
Internal Thread Size | M30 x 1,5 RHT |
Function | Tie Rod |
Extra Description | ProKit |
External Thread Size | M20 x 1,5 |
Type | Tie Rod |
Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 3.31 kg |
Placement on Vehicle | Right Rear, Lower |
Material | Cast Steel |
Inner diameter | 14 mm |
Steering arm type | Control Arm |
Paired article numbers | 40571 |
Function | Control/Trailing Arm, wheel suspension |
Extra Description | ProKit |
External Thread Size | M14 x 1,5 |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with bolts/screws |
Additional Information | with nuts, with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (36329)
- 1x Febi Bolt, control arm (37661)
- 1x Febi Bolt, control arm (37638)
- 2x Febi Nut (37412)
Important compatibility info
for OE number | 03G 115 105 |
Additional Information 2 | with gear |
Weight | 0.610 kg |
Type | Oil Pump |
Function | Oil Pump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.250 kg |
Operating Mode | Automatic |
Type | Belt Tensioner, v-ribbed belt |
Housing material | Aluminium |
Function | Belt Tensioner, v-ribbed belt |
Track rollers material | Metal |
Width of castor bearing surface | 38 mm |
Outer diameter 1 | 70 mm |
Outer diameter 2 | 78 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle |
Width | 62 mm |
Outer diameter | 91 mm |
Additional Information 2 | Wheel Bearing integrated into wheel hub |
Inner diameter | 33 mm |
Weight | 5.130 kg |
Bearing Type | Tapered Roller Bearing |
Type | Wheel Bearing Kit |
Function | Wheel Bearing Kit |
Outer diameter 1 | 67 mm |
Outer diameter 2 | 169 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Width | 32 mm |
Inspection Tag | ECE R90 Approved |
Mounting Type | Pre-assembled |
Inner Brake Drum Diameter | 200 mm |
Function | Brake Shoe Set |
Weight | 2.065 kg |
Piston Diameter | 20.6 mm |
Type | Brake Shoe Set |
Additional Information | with accessories, with wheel brake cylinder, with fastening/mounting material |
Thickness/Strength 1 | 6.5 mm |
Outer diameter | 202.08 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle |
Width | 52.9 mm |
Outer diameter | 220 mm |
Thickness | 57.5 mm |
Inner diameter | 180 mm |
Bolt Hole Circle Diameter | 100 mm |
Centering Diameter | 67.1 mm |
Weight | 2.8 kg |
Number of mounting bores | 1 |
Max.skimmed drum measure | 181.2 mm |
Rim Hole Number | 5 -Hole |
Type | Brake Drum |
Function | Brake Drum |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.422 kg |
Bore Diameter | 29 mm |
Fill Medium | Brake Fluid |
Function | Master Cylinder, clutch |
Type | Master Cylinder, clutch |
for OE number | 20835246 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.22 kg |
Function | Shaft Seal, crankshaft |
Inner diameter | 85 mm |
Outer diameter | 105 mm |
Material | PTFE (polytetrafluoroethylene) |
Width | 160 mm |
Placement on Vehicle | transmission sided |
Type | Shaft Seal, crankshaft |
Additional Information 2 | with flange |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 4.075 kg |
Outer diameter | 194 mm. 129 mm |
Thickness | 85.6 mm |
Inner diameter | 32 mm |
Number of Ribs | 9 |
Parameter | 5PK + 6PK |
Function | Belt Pulley, crankshaft |
Type | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Width of castor bearing surface | 26 mm |
Function | Deflection/Guide Pulley, v-ribbed belt |
Material | Plastic |
Outer diameter | 70 mm |
Weight | 0.166 kg |
Type | Deflection/Guide Pulley, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 55 mm |
Operating Mode | Automatic |
Housing material | Aluminium |
Function | Belt Tensioner, v-ribbed belt |
Track rollers material | Plastic |
Width of castor bearing surface | 22 mm |
Weight | 0.486 kg |
Type | Belt Tensioner, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.53 kg |
Number of Connectors / Ports | 2 |
Function | Mounting, engine |
Bearing/Mounting Type | electrically adjustable hydro mount |
Material | Rubber/Metal |
Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Connectors / Ports | 2 |
Weight | 0.260 kg |
Extra Description | febi Plus |
Placement on Vehicle | Intake Side, Exhaust Side |
Type | Control Valve, camshaft adjustment |
Function | Control Valve, camshaft adjustment |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Mounting, engine |
Bearing/Mounting Type | Rubber-Metal Mount |
Paired article numbers | 40096 |
Placement on Vehicle | Left Front |
Weight | 1.93 kg |
Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Paired article numbers | 40097 |
Bearing/Mounting Type | Rubber-Metal Mount |
Function | Mounting, engine |
Placement on Vehicle | Right Front |
Weight | 1.97 kg |
Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Spanner Size | 17 |
Number of Connectors / Ports | 2 |
Weight | 0.082 kg |
Function | Sensor, exhaust gas temperature |
Cable Length | 1000 mm |
External Thread Size | M14 x 1,5 |
Type | Sensor, exhaust gas temperature |
for OE number | 20889280 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Connectors / Ports | 2 |
Weight | 0.071 kg |
Cable Length | 794 mm |
Type | Sensor, exhaust gas temperature |
Function | Sensor, exhaust gas temperature |
External Thread Size | M14 x 1,5 |
Placement on Vehicle | behind exhaust turbocharger |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023