Important compatibility info
Number of Connectors / Ports | 2 |
Weight | 0.05 kg |
for OE number | 008 542 35 18 |
Type | Sensor, exhaust gas temperature |
Function | Sensor, exhaust gas temperature |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Heating / Cooling | with jiggle pin |
Additional Information | with gasket/seal |
Material | Plastic |
Colour | Black |
Weight | 1.2877 kg |
Extra Description | febi Plus |
Function | Cylinder Head Cover |
Type | Cylinder Head Cover |
for OE number | 03L 103 469 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | with nut |
Transmission-side joint diameter | 81.4 mm |
Thread Size | M22x1,5 |
Function | Drive Shaft |
Type | Drive Shaft |
Wheel Sided Joint Diameter | 86 mm |
Min. Length | 975 mm |
External Teeth, Wheel Side | 27 |
Weight | 9.078 kg |
External Teeth, Diff.Side | 26 |
Placement on Vehicle | Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.763 kg |
Material | NBR (nitrile butadiene rubber), PVC |
Inner diameter 1 | 76.5 mm |
Colour | Black |
Number of Connectors / Ports | 2 |
Inner diameter 2 | 45.5 mm |
Function | Intake Hose, air filter |
Additional Information 2 | with sensor |
Extra Description | febi Plus |
Type | Intake Hose, air filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Sheet Steel |
Placement on Vehicle | Rear Axle Left, Lower |
Steering arm type | Control Arm |
Paired article numbers | 182083 |
Weight | 4.680 kg |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 73 mm |
Number of Ribs | 6 |
Operating Mode | Automatic |
Housing material | Aluminium |
Function | Belt Tensioner, v-ribbed belt |
Track rollers material | Plastic |
Weight | 0.74 kg |
Type | Belt Tensioner, v-ribbed belt |
Width of castor bearing surface | 29 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Cone Size | 22 mm |
Additional Information | with rubber mounts, with lock nut |
Paired article numbers | 181051 |
Weight | 7.051 kg |
External Thread Size | M16 x 1,5 |
Material | Sheet Steel |
Additional Information 2 | with ball joint |
Steering arm type | Control Arm |
Placement on Vehicle | Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 229 mm |
Width | 75 mm |
Thickness | 61 mm |
Combi Switch Function | with indicator function, with light dimmer function, with wipe-wash function, with high beam function |
Function | Steering Column Switch |
Type | Steering Column Switch |
Weight | 0.105 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Cast Aluminium |
Number of Wings | 9 |
Water pump impeller material | Metal |
Weight | 1.766 kg |
Function | Water Pump, engine cooling |
Additional Information | with gasket/seal |
Type | Water Pump, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | with dryer |
Refrigerant | R 134a |
Weight | 2.004 kg |
Type | Condenser, air conditioning |
Function | Condenser, air conditioning |
Core Length | 374 mm |
Core Width | 583 mm |
Core Depth | 16 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Min. Length | 930 mm |
Wheel Sided Joint Diameter | 91.6 mm |
External Teeth, Diff.Side | 26 |
Type | Drive Shaft |
Function | Drive Shaft |
Weight | 7.986 kg |
Transmission-side joint diameter | 87.1 mm |
External Teeth, Wheel Side | 25 |
Placement on Vehicle | Front Axle Right |
Additional Information 2 | with nut |
Thread Size | M20x1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle |
Outer diameter | 280 mm |
Thickness | 142 mm |
Brake Disc Thickness | 16 mm |
Brake Disc Type | Solid |
Minimum thickness | 14.5 mm |
Bolt Hole Circle Diameter | 170 mm |
Surface | Coated |
Function | Brake Disc |
Additional Information 2 | with wheel studs |
Weight | 13.0 kg |
External Thread Size | M18 x 1,5 |
Type | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 7.58 kg |
Function | Centre Rod Assembly |
Cone Size | 26 mm |
Pipe Diameter | 40 mm |
Rod/Strut | Push Rod |
Length | 940 mm |
Placement on Vehicle | Front Axle |
Extra Description | ProKit |
Type | Centre Rod Assembly |
External Thread Size | M20 x 1,5 |
Internal Thread Size | M30 x 1,5 RHT |
Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Operating Mode | Electric |
Function | Window Regulator |
Additional Information | with fastening/mounting material, without electric motor |
Placement on Vehicle | Right Front |
Type | Window Regulator |
Weight | 1.0 kg |
Paired article numbers | 176900 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Right |
External Teeth, Wheel Side | 28 |
Additional Information 2 | with nut |
Thread Size | M24 x 1,5 |
Paired article numbers | 182962 |
External Teeth, Diff.Side | 39 |
Weight | 11.004 kg |
Function | Drive Shaft |
Type | Drive Shaft |
Min. Length | 1117 mm |
Wheel Sided Joint Diameter | 98 mm |
Transmission-side joint diameter | 89 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 6.46 kg |
Pipe Diameter | 38 mm |
Function | Centre Rod Assembly |
Rod/Strut | Push Rod |
Driver Position | for right-hand drive vehicles |
Internal Thread Size | M30 x 1,5 LHT |
External Thread Size | M18 x 1,5 |
Length | 900 mm |
Cone Size | 22 mm |
Extra Description | ProKit |
Type | Centre Rod Assembly |
Additional Information | with castellated nut and split pins |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Cone Size | 19.7 mm |
External Thread Size | M14 x 1,5 |
Steering arm type | Control Arm |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Cone Size 2 | 22.5 mm |
Paired article numbers | 183729 |
Weight | 1.714 kg |
Additional Information 2 | with ball joint |
Placement on Vehicle | Rear, Lower, Front Axle Right |
Additional Information | with lock nut, with rubber mounts |
Material | Aluminium |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M16 x 1,5 |
Weight | 2.1 kg |
Placement on Vehicle | Front Axle Right, Lower, Front |
Material | Aluminium |
Steering arm type | Control Arm |
Paired article numbers | 39979 |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with bearing, with ball joint |
Cone Size | 19 mm |
Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (39978)
- 1x Febi Nut (39976)
Important compatibility info
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Thread Size | M27x1,5 |
Bolt Hole Circle Diameter | 94 mm |
Bore Diameter | 10.5 mm |
External Teeth, Wheel Side | 30 |
Weight | 7.630 kg |
Number of mounting bores | 6 |
Min. Length | 651 mm |
Wheel Sided Joint Diameter | 94 mm |
Transmission-side joint diameter | 108 mm |
Type | Drive Shaft |
Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Cone Size | 19.8 mm |
Additional Information 2 | with ball joint |
Steering arm type | Control Arm |
Paired article numbers | 183727 |
Weight | 1.714 kg |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Material | Aluminium |
Additional Information | with rubber mounts, with lock nut |
Placement on Vehicle | Rear, Lower, Front Axle Left |
Cone Size 2 | 22.5 mm |
External Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023