Important compatibility info
Weight | 3.1 kg |
Number of Teeth | 8 |
Voltage | 12 V |
Function | Starter |
Type | Starter |
Rated Power | 0.85 kW |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Width | 53 mm |
Outer diameter | 74 mm |
Type | Wheel Bearing Kit |
Function | Wheel Bearing Kit |
Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated ABS sensor |
Weight | 3.16 kg |
Bearing Type | Angular Ball Bearing |
Inner diameter | 30 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.48 kg |
Function | Thermostat, coolant |
Outer diameter | 32 mm |
Opening Temperature | 105 °C |
Type | Thermostat, coolant |
Additional Information | with gasket/seal |
Additional Information 2 | with Temperature Switch |
for OE number | 98 086 472 80 |
Housing Type | with housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Right |
External Teeth, Wheel Side | 28 |
Additional Information 2 | with nut |
Thread Size | M24 x 1,5 |
Paired article numbers | 182962 |
External Teeth, Diff.Side | 39 |
Weight | 11.004 kg |
Function | Drive Shaft |
Type | Drive Shaft |
Min. Length | 1117 mm |
Wheel Sided Joint Diameter | 98 mm |
Transmission-side joint diameter | 89 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | with rolling bearing |
Type | Suspension, propshaft |
Function | Suspension, propshaft |
Bearing Type | Rolling Bearing |
Thickness | 182 mm |
Outer diameter | 55 mm |
Inner diameter | 35 mm |
Width | 36 mm |
Weight | 0.39 kg |
Hole Spacing | 163 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M16 x 1,5 |
Weight | 2.1 kg |
Placement on Vehicle | Front Axle Right, Lower, Front |
Material | Aluminium |
Steering arm type | Control Arm |
Paired article numbers | 39979 |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with bearing, with ball joint |
Cone Size | 19 mm |
Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (39978)
- 1x Febi Nut (39976)
Important compatibility info
Length | 825 mm |
Outer diameter | 52 mm |
Rod/Strut | Guide Rod |
Cone Size | 30 mm |
Pipe Diameter | 52 mm |
Function | Centre Rod Assembly |
Additional Information | with castellated nut and split pins |
Driver Position | for left-hand/right-hand drive vehicles |
Extra Description | ProKit |
Type | Centre Rod Assembly |
Weight | 9.34 kg |
External Thread Size | M24 x 1,5 |
Internal Thread Size | M30 x 1,5 RHT |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.39 kg |
Placement on Vehicle | Rear Axle |
Width | 32 mm |
Outer diameter | 180 mm |
Inspection Tag | ECE R90 Approved |
Mounting Type | Pre-assembled |
Function | Brake Shoe Set |
Piston Diameter | 20.6 mm |
Type | Brake Shoe Set |
Additional Information | with wheel brake cylinder, with accessories, with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.82 kg |
Additional Information | with gaskets/seals |
Type | Seal Kit, multi-valve |
Function | Seal Kit, multi-valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Thermostat, coolant |
Material | Cast Aluminium |
Number of Connectors / Ports | 2 |
Opening Temperature | 90 °C |
Weight | 0.36 kg |
Type | Thermostat, coolant |
Additional Information | with temperature sensor, with gasket/seal |
for OE number | 31293698 |
Housing Type | with housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Voltage | 12 V |
Number of Teeth | 10 |
Rated Power | 0.9 kW |
Weight | 2.86 kg |
Type | Starter |
Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Cylinder Head, air compressor |
Weight | 1.3 kg |
Function | Cylinder Head, air compressor |
Additional Information 2 | without spacer plate |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.63 kg |
Placement on Vehicle | Right |
Bearing/Mounting Type | Hydro Mount |
Type | Mounting, engine |
Function | Mounting, engine |
for OE number | 212 240 01 00 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
for OE number | C2Z 29118 |
Weight | 1.130 kg |
Additional Information 2 | with lid |
Additional Information | with coolant level sensor |
Type | Expansion Tank, coolant |
Function | Expansion Tank, coolant |
Material | Plastic |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | EGR Valve |
Type | EGR Valve |
Weight | 0.58 kg |
Additional Information | with gaskets/seals |
for OE number | 045 131 501 L |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Oil Separator, crankcase ventilation |
Number of hoses | 3 |
Weight | 0.32 kg |
Extra Description | febi Plus |
Type | Oil Separator, crankcase ventilation |
Additional Information | with venting hoses |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Oil Separator, crankcase ventilation (44158)
- 1x Febi Hose, crankcase ventilation (100647)
- 1x Febi Hose, crankcase ventilation (100453)
- 1x Febi Hose, crankcase ventilation (100452)
Important compatibility info
Weight | 1.47 kg |
Outer diameter | 90 mm |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Width | 60 mm |
Function | Wheel Bearing |
Inner diameter | 55 mm |
Bearing Type | Tapered Roller Bearing |
Type | Wheel Bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.7 kg |
Outer diameter | 290 mm |
Thickness | 75 mm |
Number of Connectors / Ports | 2 |
Rated Power | 300 W |
Number of Wings | 9 |
Function | Fan, engine cooling |
Type | Fan, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 1666 mm |
Number of Ribs | 7 |
Weight | 0.970 kg |
Type | V-Ribbed Belt Set |
Function | V-Ribbed Belt Set |
Belt Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Tensile Cord Material | Polyester |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi V-Ribbed Belt (186518)
- 1x Febi Belt Tensioner, v-ribbed belt (36831)
- 1x Febi Deflection/Guide Pulley, v-ribbed belt (36826)
Important compatibility info
Material | Aluminium |
Weight | 0.83 kg |
Type | Oil Cooler, automatic transmission |
Function | Oil Cooler, automatic transmission |
Core Length | 163 mm |
Core Width | 78 mm |
Core Depth | 52 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023